Search

The interest of biofuel producers in Neotropical species that have high growth rates, slight wood density variability, and elemental composition that does not compromise the environment has increased in recent decades. We investigated the density and chemical characteristics of wood of Schizolobium parahyba var. amazonicum (Huber × Ducke) Barneby as a source for the generation of bioenergy. Apparent radial wood density profiles (X-ray densitometry (XRD)) and the elemental distribution (X-ray fluorescence (XRF)) of Cl, S, K, and Ca in the wood of nine S. parahyba var. amazonicum trees, divided into three diameter classes (I = 15.5, II = 19.5, and III = 23.5 cm) were analyzed. The high heating value (HHV) of the wood samples was determined, and the energy density was estimated by the product of the HHV and the apparent density. Trees that grew better (classes II and III) produced wood with higher density. These trees showed higher concentrations of K and S, and lower concentrations of Ca and Cl. The highest Cl concentrations were observed in classes with smaller diameters. The chlorine levels met the standards for use of this wood as fuel, but the sulfur levels were higher than the threshold recommended by the ISO 17225-3:2021 guidelines, which can limit the use of the species for certain energy uses. The wood of S. parahyba var. amazonicum had interesting characteristics for the production of bioenergy due to its low density, so it can be used in the production of solid biofuels such as pellets and briquettes. Monitoring chlorine and sulfur is important, since during the combustion of biomass they are released into the atmosphere and can negatively contribute to the effects of climate change., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Tannins are polyphenols that can be extracted from different parts of the plant and have different known commercial applications. The extraction of tannins generates a significant amount of low-density wastes. An alternative that can be applied to ensure energy reuse of this low-density waste is a densification process, such as briquetting. Thus, this research work aimed to assess the energy potential of the residue from the extraction of tannins of different forest species, aiming at its energy reuse in the form of briquettes. Stem barks of 6 forest species (Acacia mangium, AM; Anacardium occidentale, AO; Anadenanthera colubrina, AC; Azadirachta indica, AI; Mimosa caesalpiniaefolia, MC; Mimosa tenuiflora, MT) were used after tannin extraction. Bulk density, energy (higher, lower, and net heating value) and thermal (TG/DTG) properties, and chemical constitution (extractives, lignin, and holocellulose) of the materials were determined. In addition, briquette compaction ratio, apparent density, volumetric expansion, and water adsorption over the days were evaluated. The highest bulk densities were found in the barks of Anadenanthera colubrina (0.529 g.cm -3 ) and Mimosa tenuiflora (0.407 g.cm -3 ), whereas the species that showed the best result of higher heating value was Acacia mangium (20.44 MJ.kg -1 ), followed by Azadirachta indica (19.39 MJ.kg -1 ) and Mimosa caesalpiniifolia (18.85 MJ.kg -1 ). Briquetting increased the density of the evaluated material by 2.3 to 4.9 times. All briquettes produced with wastes from tannin extraction evaluated in this work showed potential for energy production. With more information on the quantification of waste generated and data on the economic viability of production, these tannin-producing industries can benefit both environmentally and economically, by reusing these wastes for energy production., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The pulp bleaching process removes or transforms the chromophore groups in the pulp, so that the final product reaches a desired brightness. However, this chemical treatment inevitably results in yield loss. Therefore, the objective of this work was to quantify the yield loss caused during the bleaching of kraft pulp of Pinus radiata delignified with oxygen. The material was submitted to three distinct ECF sequences (D 0 (EPO)D 1 D 2 , D 0 (EPO)D 1 P, and Z/EDP). At the end of each bleaching stage, the pulp brightness and the loss of gravimetric yield of the process were determined, and the generated filtrates were collected. From these filtrates, the pollutant load of the effluent was determined by measuring the content of total dissolved solids, the chemical oxygen demand, the concentration of total organic carbon carbon, and the adsorbable organic halogens. Among the whole sequences, the Z/EDP sequence had the lowest gravimetric yield, the highest pollutant load in the collected filtrate, and lowest potential for adsorbable organic halogens generation. There was good correlation between the loss of yield from the bleaching process and the organic load of the generated effluent; and among the techniques studied, the quantification of total organic carbon was the most appropriate method for the indirect quantification of the yield loss during the bleaching process of the studied material.

Adhesive-free wood-plastic composite panels made with lignocellulosic wastes, and recycled plastics can be a sustainable option for generating useful "green" products. The present work assessed the physical-mechanical properties of adhesive-free panels produced with Qualea sp. sawdust and recycled polypropylene (PP). Discarded PP packaging was used. The packages were washed and ground with a laboratory knife mill until particle size of 10 to 14 mesh. Qualea sp. sawdust was sieved to select particle size of 14 to 30 mesh. Four experimental treatments were assessed by varying the percentages of PP and sawdust, as follows, 60 and 40%, 70 and 30%, 80 and 20%, and 90 and 10%, in an entirely randomized design with 3 panels per treatment, totaling 12 panels. The mats were hot-pressed at 180 °C during 20 min, the first 10 min under pressure of 1.0 MPa and the remaining 10 min at 42 MPa. Physical-mechanical properties of the panels were obtained as follows: density, moisture content, water absorption, thickness swelling, moduli of elasticity and rupture, and Rockwell hardness. In general, an increase of the percentage of PP provided higher dimensional stability to the panels, but there was no significant influence on mechanical strength.