Search

This paper presents an experimental study to evaluate the effect of local mineral additions (pozzolan, slag and limestone) on the rheological behaviour of based cement binder's pastes. The binary, ternary and quaternary binder pastes were prepared with the partial clinker cement replacement limited up to 20%, according with type CEM II specifications. The cements were characterized by their geometric shapes, the reactivity and the chemical composition. An experimental design plan was used to modelling the rheological behaviour of pastes. The relatives yield stress and plastic viscosity of binder's pastes, with normal consistency, were determined. The results showed that all the tested compositions with additions follow the same rheological behaviour law according to the Bingham model. The binder pastes rheological parameters (yield stress and viscosity) are affected by mineral additions. The highest values of the rheological parameters were measured in binary and ternary cements with limestone and pozzolan. On the other hand, the lower viscosity among the tested pastes was obtained with slag addition. The statistical approach allowed us to obtain a satisfactory modelling of viscosity and yield stress with a coefficient of determination R2 = 0.91 and 0.92, respectively and a satisfactory correlation between the viscosity and the water/binder ratio (W/B) for a normal consistency with a coefficient of determination R2 = 0.91. [ABSTRACT FROM AUTHOR]

The use of mineral additions is a common practice in the production of cementitious materials. Recently proposed usage of high amounts of cement replaced by mineral additions requires the study of the chemical interaction of these additions with the cement. This study intends to evaluate, by means of TG/DTG techniques, XRD and compressive strength, the effect of high volume of mineral additions in the hydration of cementitious pastes. Pastes with 50–70% of cement replaced by mineral addition and with different combinations of fly ash and metakaolin were evaluated, two pastes without mineral addition and two other pastes with lime addition. Results showed TG/DTG and XRD techniques are more suitable for evaluating kinetics of reactions of hydration, making it possible to quantify the substantial reduction in the levels of portlandite in hydrated pastes containing high volumes of mineral additions. These techniques allowed to find important differences in the evaluation of calcium hydroxide, because its morphology can change in the presence of additions. Also showed that it is possible to achieve, enhanced or even high compressive strength (50–80 MPa) in concretes containing reduced cement contents. As well as more resistance against harmful agents and carbonation attack. [ABSTRACT FROM AUTHOR]