Search

Objectives: To evaluate a contiguous helical CT protocol with two different target noise levels in chest/abdomen/pelvis CT.Methods: 41 patients (study group) underwent a helical scan (P1) with two different target noise levels (SDs), SD = 16 for chest and SD = 13 for abdomen/pelvis. Two further protocols were planned but not executed: a single helical scan with only one SD (SD = 13) for the entire scan range (P2), and two separate helical scans overlapping over the liver and same SD settings as for P1 (P3). All DLPs were recorded. Image quality was assessed qualitatively and quantitatively on all scans. The control group consisted of 40 patients, was scanned with protocol P3 and analysed using the same metrics.Results: DLPs (mean/SD) for P1, P2 and P3 were 859.5/392.9, 1040.2/510.5 and 1027.4/469.4, respectively. P1 offered a mean dose reduction of 17.4% compared to P2, and 16.3% compared to P3 (both p < 0.001). There were no differences in image quality between both patient groups (p > 0.3).Conclusion: Contiguous helical scanning of the chest/abdomen/pelvis with variable target noise levels results in approximately 17% dose reduction if compared to a single acquisition with only abdominal dose settings or two separate acquisitions of the chest and abdomen/pelvis.Key Points: • Low dose chest and standard abdomen CTs can be combined. • Variable SD CT scanning allows for radiation dose reduction. • Variable SD CT scanning maintains image quality. [ABSTRACT FROM AUTHOR]

Multislice scanning has substantially improved the performance of CT scanners, and thus the relation between scan duration, available scan length, and spatial resolution along the patient axis (zaxis). Near-isotropic imaging of whole organ systems is already possible with 4-slice scanners, but only with 8 to 16-slice scanners can the scan duration be shortened as well. Reconstructing overlapping thin-section data ("secondary raw data set") provides the basis for image reconstruction in any desired plane. By using thick multiplanar reformation (MPR) techniques, image quality can be improved while keeping patient dose low. Using unfavorable scanfling parameters, exposure dose can be substantially increased compared with single-slice scanning, but thick MPR and individual-dose modulation techniques can provide the basis for dose reduction. Low-kVp scanning, in particular, is useful in children and slim adults and is an excellent technique to improve image contrast in CT angiographic studies. Short spiral scans should be avoided with multislice CT since overranging (extra rotations at the beginning and end of the scan, used for data interpolation) can substantially increase patient dose. Future trends include the introduction of thinner detector rows, wider detector arrays, faster tube rotation, and area detectors than can also be used for fluoroscopy. Noise-reduction techniques and individual dose modulation will gain importance with higher isotropic resolution. Functional and perfusion imaging, as well as advanced image processing and computer-aided diagnosis programs, will add to the possibilities of the next generation of multislice CT scanners. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the accuracy of 3-mm-thick reconstructed sections in the diagnosis of bronchiectasis with multislice CT (MSCT). Forty consecutive patients suspected of bronchiectasis (23 females, 17 males; mean age 51 years) underwent MSCT of the entire thorax with a 4×1-mm collimation (120 kV, 0.5 s/rotation, 80 mAs/slice) and a pitch of 1.75. From each data set (mean z-axis coverage: 257 mm; mean duration: 21 s), two series of images were systematically generated: 1-mm (group 1) and 3-mm (group 2)-thick reconstructed scans. Both series of images were obtained at 10-mm intervals and reconstructed with a high-spatial-frequency algorithm. Two observers independently analyzed the presence of bronchiectasis and associated abnormalities in group-1 and group-2 lung images. No significant difference between group 1 and group 2 was found in: (a) the detection of bronchiectasis, identified in 24 patients (60%) in group 1 and in 23 patients (57.5%) in group 2 (p=0.08); (b) the evaluation of the extent of bronchiectasis, identifying focal bronchiectasis in 10 patients (25%) in group 1 and 7 patients (17.5%) in group 2 (p=0.39) and multifocal bronchiectasis in 16 patients (40%) in both groups; (c) the characterisation of bronchiectasis (cylindral bronchiectasis: group 1, n=24, 60%; group 2, n=21, 53%, p=0.08); varicose bronchiectasis: group 1, n=5, 12.5%; group 2, n=6, 15%, p=0.56); and cystic bronchiectasis: group 1, n=2, 5%; group 2, n=2, 5%). Apart from the identification of abnormal bronchial wall thickening (group 2, n=35, 87.5%, vs group 1, n=31, 77.5%, p<0.05), recognition of associated bronchopulmonary anomalies did not differ between the two groups. This study demonstrates a comparable accuracy of the 3- and 1-mm-thick reconstructed scans in the detection and characterization of bronchiectasis. These results suggest the potential usefulness of 3-mm-thick scans generated from 4×2.5-mm acquisitions in the screening of bronchiectasis, which would allow a 20% radiation dose reduction compared with the present investigation. [ABSTRACT FROM AUTHOR]

The objective of this study was to analyze the influence of collimation on the identification of peripheral pulmonary arteries on helical CT scans. Three hundred sixty of 370 consecutive helical CT angiograms of the pulmonary circulation obtained during an 18-month investigation period were considered as technically acceptable for the detection of acute pulmonary embolism and were retrospectively analyzed. Patients in group A (n = 274) underwent CT with 2-mm collimation and pitch of 2; those in group B (n = 86) underwent CT with 3-mm collimation and pitch 1.7; a 0.75-s rotation time was systematically used. A total of 2160 segmental (six arterial zones per patient) and 2160 subsegmental (six arterial zones per patient) arterial zones were assessed. Whereas the percentage of segmental arteries was not significantly different between group A (86%) and group B (89%), the percentage of analyzable subsegmental arteries was greater in group A (65%) than in group B (43 %) (P<0.001). The causes of inadequately depicted subsegmental arterial zones were partial-volume effects (group A, n = 302; 52%; group B, n = 197; 67%; P<0.001), suboptimal enhancement (group A, n = 145; 25%; group B, n = 43; 15%; P<0.05), motion artifacts (group A, n = 113; 20%; group B, n = 30; 10%), and unincluded arteries (group A, n = 20; 3%; group B, n = 25; 8%). Helical CT with 2-mm collimation at 0.75 s per revolution enables marked improvement in the analysis of subsegmental arteries in routine clinical practice. [ABSTRACT FROM AUTHOR]