Search

In this study, a miniaturized cruciform-shaped sample geometry which allows reaching high plastic strain under equibiaxial loading with reduced thickness at the test section is presented. The thinning method results in excellent surface quality that can be used for electron backscatter diffraction (EBSD) and high-resolution digital image correlation (HRDIC) investigations. The new cruciform geometry is used to study the slip activity in metastable austenitic stainless steel 304 during uniaxial and equibiaxial deformation using HRDIC. The results are discussed with respect to the Schmid law and the effect of multiple slip activity on the nucleation of martensitic transformations. [ABSTRACT FROM AUTHOR]

Micro electro mechanical systems, coatings, and thin films contain materials that are often subjected to complex loading conditions and high frequencies. Therefore, the implementation of a resonant multiaxial fatigue setup for small-scale samples is of high interest. Finite Element simulations have been used to design small-scale samples which possess very close bending and torsional resonant frequencies. The bending and torsional modes are excited by two piezo actuators working either in or out of phase with one another. The bending and torsional amplitudes are measured independently by a laser and the actuator amplitudes are controlled by a Field Programmable Gate Array. The fatigue setup can be used with a varying range of sample sizes from centimeters down to tens of micrometers. The novel multiaxial resonant micro fatigue setup as well as results (fatigue damage for Ni and lifetime for Cu) from bending small-scale fatigue tests are shown and discussed. [ABSTRACT FROM AUTHOR]

The acrylic elastomer membrane VHB 4910 is a material widely used for applications as Dielectric Elastomer Actuators DEA. For suitable actuation performance however, it is necessary to pre-strain the very compliant membrane. This reduces the lifetime of DEA due to early failure of the tensioned membrane. Interpenetrating Polymer Network Reinforced Acrylic Elastomers (IPN) are produced by introducing a curable additive into the pre-strained acrylic elastomer membrane. While curing at elevated temperature, the additive forms a second polymeric network that supports part of the pre-strain in the acrylic membrane. This leads to a free standing material that combines the actuation performance of pre-strained VHB 4910 with an excellent long-term reliability. This work presents a detailed mechanical characterization of acrylic IPN membranes. To reduce the experimental effort required to characterize the nonlinear elastic behavior, we developed a unique specimen design that enables the assessment of uni- and biaxial stress states within one experiment. Slight changes in the material composition of IPN-membranes lead to substantial variations in their mechanical properties. The extraction of material behavior in different kinematic states within a single sample thus reduces the uncertainty on the determination of constitutive models. An extensive experimental campaign was carried out involving uniaxial and equibiaxial tension and relaxation. Image based local deformation measurements and iterative finite element calculations were applied to derive constitutive model parameters that describe the mechanical response in a wide range of planar strain and strain rate. [ABSTRACT FROM AUTHOR]