Search

Currently, industry in all its forms is vital for the human population because it provides the services and goods necessary to live. However, this process also pollutes soils and rivers. This research provides an environmentally friendly solution for the generation of electrical energy and the bioremediation of heavy metals such as arsenic, iron, and copper present in river waters used to irrigate farmers’ crops. This research used single-chamber microbial fuel cells with activated carbon and zinc electrodes as anodes and cathodes, respectively, and farmers’ irrigation water contaminated with mining waste as substrate. Pseudomonas stutzeri was used as a biocatalyst due to its ability to proliferate at temperatures between 4 and 44 °C—at which the waters that feed irrigated rivers pass on their way to the sea—managing to generate peaks of electric current and voltage of 4.35 mA and 0.91 V on the sixth day, which operated with an electrical conductivity of 222 mS/cm and a pH of 6.74. Likewise, the parameters of nitrogen, total organic carbon, carbon lost on the ignition, dissolved organic carbon, and chemical oxygen demand were reduced by 51.19%, 79.92%, 64.95%, 79.89%, 79.93%, and 86.46%. At the same time, iron, copper, and arsenic values decreased by 84.625, 14.533, and 90.831%, respectively. The internal resistance values shown were 26.355 ± 4.528 Ω with a power density of 422.054 mW/cm2 with a current density of 5.766 A/cm2. This research gives society, governments, and private companies an economical and easily scalable prototype capable of simultaneously generating electrical energy and removing heavy metals.

This research aimed to use kiwi waste as fuel to generate bioelectricity through microbial fuel cells. It was possible to generate an electrical current and voltage peaks of 3.807 ± 0.102 mA and 0.993 ± 0.061 V on day 11, showing an electrical conductivity of 189.82 ± 3.029 mS/cm and an optimum operating pH of 5.966 ± 0.121. The internal resistance of the cells was calculated using Ohm’s Law, resulting in a value of 14.957 ± 0.394 Ω, while the maximum power density was 212.68 ± 26.84 mW/m2 at a current density of 4.506 A/cm2. Through the analysis of the FTIR spectra carried out on the substrate, a decrease in the characteristic organic peaks was observed due to their decomposition during the electricity-generation process. In addition, it was possible to molecularly identify the bacteria Comamonas testosteroni, Sphingobacterium sp., and Stenotropho-monas maltophila adhered to the anodized biofilm. Finally, the capacity of this residue to generate bioelectricity was demonstrated by lighting an LED bulb with a voltage of 2.85 V.