Search

Extreme forest fires have historically been a significant concern in Canada, the Russian Federation, the USA, and now pose an increasing threat in boreal Europe. This paper deals with application of the wildFire cLimate impacts and Adaptation Model (FLAM) in boreal forests. FLAM operates on a daily time step and utilizes mechanistic algorithms to quantify the impact of climate, human activities, and fuel availability on wildfire probabilities, frequencies, and burned areas. In our paper, we calibrate the model using historical remote sensing data and explore future projections of burned areas under different climate change scenarios. The study consists of the following steps: (i) analysis of the historical burned areas over 2001–2020; (ii) analysis of temperature and precipitation changes in the future projections as compared to the historical period; (iii) analysis of the future burned areas projected by FLAM and driven by climate change scenarios until the year 2100; (iv) simulation of adaptation options under the worst-case scenario. The modeling results show an increase in burned areas under all Representative Concentration Pathway (RCP) scenarios. Maintaining current temperatures (RCP 2.6) will still result in an increase in burned area (total and forest), but in the worst-case scenario (RCP 8.5), projected burned forest area will more than triple by 2100. Based on FLAM calibration, we identify hotspots for wildland fires in the boreal forest and suggest adaptation options such as increasing suppression efficiency at the hotspots. We model two scenarios of improved reaction times—stopping a fire within 4 days and within 24 h—which could reduce average burned forest areas by 48.6% and 79.2%, respectively, compared to projected burned areas without adaptation from 2021–2099. [ABSTRACT FROM AUTHOR]

Soil organic carbon (SOC) is an important component of the ecosystem carbon pool, and fire is one of the important disturbances in forest ecosystems. With global warming, there has been a gradual increase in boreal forest fires, which has a nonnegligible impact on the SOC dynamics in forests. The CENTURY model was employed in our study to simulate the changes in SOC stocks in boreal forests of the Great Xing'an Mountains, China under different fire severity conditions. Fire severity was represented by the metric of difference normalized burn ratio (dNBR) derived from 30-m Landsat-8 imageries. Changes in forest SOC stocks following fire disturbance were predicted under four future Representative Concentration Pathway (RCP) scenarios (RCP2.6, RCP4.5, RCP6.0, and RCP8.5). We found that the CENTURY model had good results in simulating the SOC stocks in the postfire of China's boreal forests. Forest SOC dynamics responded differently to fire severities and the larger SOC loss was associated with increasing fire severity. Importantly, a feedback mechanism was found between climate change and SOC stocks, which reduces SOC stocks with increasing temperatures. High-severity forest fires tended to cause serious damage to the SOC pool and delay forest SOC recovery time; after such events, forest SOC stocks cannot be fully recovered to the prefire levels (6.74% loss). In addition, higher CO2 emissions and warmer temperatures significantly affected the recovery of SOC stocks after fire disturbance, resulting in larger SOC losses. Overall, we projected losses of 10.14%, 12.06%, 12.41%, and 15.70% of SOC stocks after high-severity fires in four RCP scenarios, respectively. Our findings emphasize the importance of fire disturbance and climate change on future dynamics of SOC stocks in China's boreal forests, providing a scientific basis for future boreal forest management and fire management. [ABSTRACT FROM AUTHOR]

This study estimates the radiative forcing by biomass burning and dust aerosols over the Indian subcontinent, with emphasis on the Indo-Gangetic Plains (IGP) during the period from January 2021 to April 2021, based on multiple satellite and reanalysis datasets. In this respect, we used retrievals from the Moderate Resolution Spectroradiometer (MODIS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) system, as well as reanalysis data from the Goddard Earth Observing System, version 5 (GEOS-5), the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), the Copernicus Atmosphere Monitoring Service (CAMS), and ERA-Interim. According to the MERRA-2 and the CAMS, the highest black carbon (BC) concentrations in January 2021 were 7–8 µg m−3, which were significantly lower than measurements performed in main cities along the IGP, such as Patiala, Delhi, and Kanpur. The meteorological data analysis accompanied by the CALIPSO lidar measurements showed that the vertical distribution of total attenuated backscatter (TAB) could reach altitudes of up to ~4–5 km and could be transported over the central Himalayan region. The spatial-averaged daily aerosol radiative forcing (ARF) values over the Indian subcontinent from January 2021 to April 2021 were found to range from −51.40 to −6.08 W m−2 (mean of −22.02 ± 9.19 W m−2), while on a monthly basis, the ARF values varied widely, from −146.24 to −1.63 W m−2 (mean of −45.56 ± 22.85 W m−2) over different parts of the study region. Furthermore, the spatial-averaged daily BC radiative forcing ranged from −2.23 to −0.35 (−1.01 ± 0.40 W m−2), while it varied from −15.29 to −0.31 W m−2 (−2.46 ± 2.32 W m−2) over different regions of southern Asia, indicating a rather small contribution to the total aerosol radiative effect and a large presence of highly scattering aerosols. Our findings highlight the importance of growing biomass burning, in light of recent climate change and the rapid decline in air quality over North India and the Indian Ocean. [ABSTRACT FROM AUTHOR]

The summer season of 2019-2020 has been named Australia's Black Summer because of the large forest fires that burnt for months in southeast Australia, affecting millions of Australia's citizens and hundreds of millions of animals and capturing global media attention. This extensive fire season has been attributed to the global climate crisis, a long drought season and extreme fire weather conditions. Our aim in this study was to examine the factors that have led some of the wildfires to burn over larger areas for a longer duration and to cause more damage to vegetation. To this end, we studied all large forest and non-forest fires (>100 km²) that burnt in Australia between September 2019 and mid-February 2020 (Australia's Black Summer fires), focusing on the forest fires in southeast Australia. We used a segmentation algorithm to define individual polygons of large fires based on the burn date from NASA's Visible Infrared Imaging Radiometer Suite (VIIRS) active fires product and the Moderate Resolution Imaging Spectroradiometer (MODIS) burnt area product (MCD64A1). For each of the wildfires, we calculated the following 10 response variables, which served as proxies for the fires' extent in space and time, spread and intensity: fire area, fire duration (days), the average spread of fire (area/days), fire radiative power (FRP; as detected by NASA's MODIS Collection 6 active fires product (MCD14ML)), two burn severity products, and changes in vegetation as a result of the fire (as calculated using the vegetation health index (VHI) derived from AVHRR and VIIRS as well as live fuel moisture content (LFMC), photosynthetic vegetation (PV) and combined photosynthetic and non-photosynthetic vegetation (PV+NPV) derived from MODIS). We also computed more than 30 climatic, vegetation and anthropogenic variables based on remotely sensed derived variables, climatic time series and land cover datasets, which served as the explanatory variables. Altogether, 391 large fires were identified for Australia's Black Summer. These included 205 forest fires with an average area of 584 km² and 186 non-forest fires with an average area of 445 km²; 63 of the forest fires took place in southeast (SE) Australia (the area between Fraser Island, Queensland, and Kangaroo Island, South Australia), with an average area of 1097 km². Australia's Black Summer forest fires burnt for more days compared with non-forest fires. Overall, the stepwise regression models were most successful at explaining the response variables for the forest fires in SE Australia (n = 63; median-adjusted R² of 64.3%), followed by all forest fires (n = 205; median-adjusted R² of 55.8%) and all non-forest fires (n = 186; median-adjusted R² of 48.2%). The two response variables that were best explained by the explanatory variables used as proxies for fires' extent, spread and intensity across all models for the Black Summer forest and non-forest fires were the change in PV due to fire (median-adjusted R² of 69.1%) and the change in VHI due to fire (median-adjusted R² of 66.3%). Amongst the variables we examined, vegetation and fuel-related variables (such as previous frequency of fires and the conditions of the vegetation before the fire) were found to be more prevalent in the multivariate models for explaining the response variables in comparison with climatic and anthropogenic variables. This result suggests that better management of wildland-urban interfaces and natural vegetation using cultural and prescribed burning as well as planning landscapes with less flammable and more fire-tolerant ground cover plants may reduce fire risk to communities living near forests, but this is challenging given the sheer size and diversity of ecosystems in Australia. [ABSTRACT FROM AUTHOR]

Climate change causes more extreme droughts and heat waves in Central Europe, affecting vegetative fuels and altering the local fire regime. Wildfire is projected to expand into the temperate zone, a region traditionally not concerned by fire. To mitigate this new threat, local forest management will require spatial fire hazard information. We present a holistic and comprehensible workflow for quantifying fuels and wildfire hazard through fire spread simulations. Surface and canopy fuels characteristics were sampled in a small managed temperate forest in Northern Germany. Custom fuel models were created for each dominant species (Pinus sylvestris, Fagus sylvatica, and Quercus rubra). Canopy cover, canopy height, and crown base height were directly derived from airborne LiDAR point clouds. Surface fuel types and crown bulk density (CBD) were predicted using random forest and ridge regression, respectively. Modeling was supported by 119 predictors extracted from LiDAR, Sentinel-1, and Sentinel-2 data. We simulated fire spread from random ignitions, considering eight environmental scenarios to calculate fire behavior and hazard. Fuel type classification scored an overall accuracy of 0.971 (Kappa = 0.967), whereas CBD regression performed notably weaker (RMSE = 0.069; R2 = 0.73). Higher fire hazard was identified for strong winds, low fuel moisture, and on slopes. Fires burned fastest and most frequently on slopes in large homogeneous pine stands. These should be the focus of preventive management actions. [ABSTRACT FROM AUTHOR]