Search

To date, heat is still the most used technology in food preservation. The calculus of heat treatments is usually based on Bigelow observations i.e. treatment time is an exponential function of the heat treatment temperature. However, a number of researchers have reported deviations from linearity in heat inactivation curves that caused errors in the calculus. This research was designed to evaluate the variability of shoulder length among different sporulated species, the impact of treatment temperature on these shoulders and the relationship between the traditional DT value and shoulder length. The heat inactivation kinetics of five bacterial spores of importance for the food industry was evaluated. B. weihenstephanensis and B. cereus did not show shoulders and DT values calculated ranged from 0.99 to 0.23 and from 1.33 to 0.56 respectively at temperatures from 100 to 102.5 °C. On the other side B. subtilis, B. licheniformis and G. stearothermophilus showed shoulders of 1.75–0.42, 1.92–0.43 and 3.22–0.78 and DT values of 1.52–0.32, 2.12–0.59 and 2.22–0.48 respectively in the range of temperatures tested. From the results obtained it was concluded that the presence and magnitude of shoulders depended on the bacterial spore species, the longest being those on the bacterial spores which showed greatest heat resistance. It has also been proved that shoulder lengths vary with treatment temperature in the same proportion of traditional DT values, with the relationship Sl/DT being constant. Thus, an equation which included the constant Sl/DT was proposed.

The major objectives of this study were to determine the incidence of psychrotolerant spore formers from REPFEDS marketed in Belgium, and their diversity and characteristics. Spore formers in general were found as spores on 38.3% of the food samples and in 85% food products types evaluated. 76% of the food samples containing spore formers had spores before enrichment. A total of 86 spore formers were isolated from the samples. 28 of 86 bacterial spore formers (32.6%) were capable of vegetative growth at 7 °C. 96% (27/28) of these psychrotolerant spore formers were determined to belong to Bacillus or related genera. According to a (GTG)5-PCR analysis, 24 of these 28 isolates were genetically distinct from each other. 10.7% (3/28) of the bacilli were determined to belong to the Bacillus cereus group, namely B. cereus (chicken curry and Edam cheese) and Bacillus mycoides (Emmental cheese). Almost half of the bacilli (12/27) were putatively identified as Bacillus pumilus, which occurs ubiquitously in nature and has been associated with outbreaks of foodborne disease. Only one psychrotolerant clostridium, Clostridium tyrobutyricum, was isolated in the study. The results of this study show the highly diverse ecology and spoilage potential of psychrotolerant spore formers in REPFEDs marketed in Belgium.

Bacterial spores are ubiquitous in nature and can withstand both chemical and physical stresses. Spores can survive food preservation processes and upon outgrowth cause food spoilage as well as safety risks. The heterogeneous germination and outgrowth behavior of isogenic spore populations exacerbates this risk. A major unknown factor of spores is likely to be the inherently heterogeneous spore protein composition. The proteomics methods discussed here help in broadening the knowledge about spore structure and identification of putative target proteins from spores of different spore formers. Approaches to synchronize Bacillus subtilis spore formation, and to analyze spore proteins as well as the physiology of spore germination and outgrowth are also discussed. Live-imaging and fluorescence microscopy techniques discussed here allow analysis, at single cell level, of the 'germinosome', the process of spore germination itself, spore outgrowth and the spore intracellular pH dynamics. For the latter, a recently published improved pHluorin (IpHluorin) under control of the ptsG promoter is applicable. While the data obtained from such tools offers novel insight in the mechanisms of bacterial spore awakening, it may also be used to probe candidate antimicrobial compounds for inhibitory effects on spore germination and strengthen microbial risk assessment.

Bacterial spores are a major concern for food safety due to their high resistance to conventional preservation hurdles. Innovative hurdles can trigger bacterial spore germination or inactivate them. In this work, Geobacillus stearothermophilus spore high pressure (HP) germination and inactivation mechanisms were investigated by in situ infrared spectroscopy (FT-IR) and fluorometry. G. stearothermophilus spores' inner membrane (IM) was stained with Laurdan fluorescent dye. Time-dependent FT-IR and fluorescence spectra were recorded in situ under pressure at different temperatures. The Laurdan spectrum is affected by the lipid packing and level of hydration, and provided information on the IM state through the Laurdan generalized polarization. Changes in the –CH2 and –CH3 asymmetric stretching bands, characteristic of lipids, and in the amide I′ band region, characteristic of proteins' secondary structure elements, enabled evaluation of the impact of HP on endospores lipid and protein structures. These studies were complemented by ex situ analyses (plate counts and microscopy). The methods applied showed high potential to identify germination mechanisms, particularly associated to the IM. Germination up to 3 log10 was achieved at 200 MPa and 55 °C. A molecular-level understanding of these mechanisms is important for the development and validation of multi-hurdle approaches to achieve commercial sterility.

High pressure processing (HPP) is a new non-thermal technology commercially used to pasteurize fruit juices and extend shelf-life, while preserving delicate aromas/flavours and bioactive constituents. Given the spoilage incidents and economic losses due to Alicyclobacillus acidoterrestris in the fruit juice industry, the use of high pressure (200 MPa - 600 MPa) in combination with mild temperature (45 °C-65 °C) for 1-15 min, to inactivate these spores in orange juice were investigated. As expected, the higher the temperature, pressure and time, the larger was the A. acidoterrestris inactivation. The survival curves were described by the first order Bigelow model. For 200 MPa, D(45 °C) = 43.9 min, D(55 °C) = 28.8 min, D(65 °C) = 5.0 min and z-value = 21.3 °C. At 600 MPa, D(45 °C) = 12.9 min, D(55 °C) = 7.0 min, D(65 °C) = 3.4 min and z-value = 34.4 °C. Spores were inactivated at 45 °C and 600 MPa, and at 65 °C only 200 MPa was needed to achieve reduction in spore numbers. Results demonstrated that HPP allowed A. acidoterrestris spore inactivation at lower temperatures (45-65 °C) than conventional thermal processing (85-95 °C) without pressure, yielding a fresher and higher quality preserved food.

It is recognised that inoculum size affects the rate and extent of bacterial spore germination. It has been proposed that this is due to spores interacting: molecules released from germinated spores trigger germination of dormant neighbours. This study investigated whether changes to the total number of spores in a system or proximity to other spores (local spore density) had a more significant effect on interaction between spores of non-proteolytic Clostridium botulinum strain Eklund 17B attached to defined areas of microscope slides. Both the number of spores attached to the slides and local spore density (number of spores per mm(2)) were varied by a factor of nine. Germination was observed microscopically at 15 °C for 8 h and the probability of, and time to, germination calculated from image analysis measurements. Statistical analysis revealed that the effect of total spore number on the probability of germination within 8 h was more significant than that of proximity to neighbours (local spore density); its influence on germination probability was approximately four-times greater. Total spore number had an even more significant affect on time to germination; it had a nine-fold greater influence than proximity to neighbours. The applied models provide a means to characterise, quantitatively, the effect of the total spore number on spore germination relative to the effect of proximity to neighbouring spores.