Search

Soy protein isolate (SPI) possesses potential gelling properties, making it suitable for gel-based applications. However, the gel network stability and mechanical properties of SPI are relatively poor and can be improved through modifications or by combining it with other polymers, such as Konjac Glucomannan (KGM). Combining SPI with KGM can overcome the poor gel network stability and mechanical properties of SPI, but it reduces the water-absorbing capacity of the gel network after drying, which affects the quality characteristics of plant-based protein rehydrated foods and limits the economic feasibility of soy protein foods. In this study, SPI and KGM are the main research objects. By using the alkali method to construct SPI/KGM dry gels with good gel properties, the influence of different ultrasonic powers on the rehydration kinetics and performance changes of SPI/KGM dry gels is examined. The speed and state of water entering the pores are simulated by constructing different pore-size capillary filling models, and the rehydration mechanism of the gel is elucidated. This study provides research ideas and a theoretical basis for the application of ultrasonic wave technology in the study of dry product rehydration performance. [ABSTRACT FROM AUTHOR]

Instant dry rice noodles have a broad market prospect due to their advantages of long shelf life, convenient transportation, and convenient eating, but there are still quality problems such as long rehydration times and poor eating quality. In order to improve the quality of instant dry rice noodles, the effects of konjac glucomannan (KGM) on the gelatinization characteristics, pasting properties, and rheological properties of Indica rice flour and the structure, food quality, and starch digestibility of instant dry rice noodles made of Indica rice flour were studied. The results showed that the starch gelatinization conclusion temperature and endothermic enthalpy of Indica rice flour were reduced by adding ≤ 3% KGM, the peak viscosity, valley viscosity, final viscosity, and setback value of Indica rice flour in the pasting process decreased with the increase in the KGM addition amount, and the pseudoplasticity, viscosity, and elasticity of Indica rice flour paste were reduced by adding > 1% KGM. When the KGM addition amount was 2%, the endothermic enthalpy, final viscosity, and setback value of Indica rice flour were 2.74 J/g, 2379.5 cp, and 961.5 cp, respectively. The instant dry rice noodles made of Indica rice flour had a looser microstructure after adding KGM, and its short-range ordered structure and double helix content were reduced by adding 1~3% KGM. When the KGM addition amount was 2%, the rehydration time of instant dry rice noodles was 290 s, which was shortened by 14.7%, while the texture and sensory quality remained unchanged, and the SDS content was reduced by 16.4% while the RS content was increased by 28.8%. Therefore, the physicochemical properties of Indica rice flour and the quality of its instant dry rice noodles can be improved by adding an appropriate amount of KGM. This study can promote the application of KGM in improving the quality of rice products. [ABSTRACT FROM AUTHOR]

Improving the taste quality of rice porridge in a scientific way is essential to guiding residential and commercial production. This study aimed to determine the impact of konjac glucomannan (KGM) on the taste quality of rice porridge. The obtained results showed that the optimal concentration of KGM added to rice porridge is 1%. This was primarily observed via the reduction in water absorption, swelling power, and iodine blue value, thus increasing the hardness of rice porridge. At the same time, KGM also reduced the free water content and improved the water-holding capacity of rice porridge. Nevertheless, the pasting properties showed that the high viscosity of KGM raised the pasting viscosity of rice flour, thereby enhancing the stickiness of rice porridge with the increase in the KGM concentration. In addition, KGM gave the rice porridge a stronger aroma. Sensory evaluations further confirmed significant improvements in the color, odor, palatability, and overall acceptability of KGM-supplemented rice porridge (p < 0.05). To summarize, adding an appropriate amount of KGM was beneficial in forming a richer flavor and improving the taste quality of rice porridge. The findings offer valuable insights into the scientific processing of rice porridge products. [ABSTRACT FROM AUTHOR]

The impact of konjac glucomannan (KGM)-based synbiotics on yogurt quality is not well understood. This study investigated the effects of a synbiotic mixture of KGM and the selected probiotic Lactiplantibacillus plantarum SHY130 on the physicochemical, antioxidant, and sensory properties of yogurt. The results showed that KGM significantly promoted the growth of Lactiplantibacillus plantarum SHY130. The synbiotics dramatically enhanced the count of lactic acid bacteria in yogurt during the 14 days of storage. Texture analysis indicated that the synbiotic supplement had no impact on springiness and cohesiveness but resulted in notable reductions in hardness, gumminess, and chewiness. The synbiotics did not significantly affect the water-holding capacity and syneresis. While the synbiotics initially decreased yogurt viscosity, it increased with storage time. Furthermore, the synbiotics significantly improved the yogurt's antioxidant capacity. Additionally, the supplementation of the synbiotics did not adversely affect sensory properties, although the synbiotics containing 0.02% KGM negatively impacted overall acceptability. Overall, these findings elucidate the effects of KGM-based synbiotics on yogurt quality, providing a foundation for developing novel synbiotic yogurt products. [ABSTRACT FROM AUTHOR]

The large molecular weight and high viscosity of natural konjac glucomannan (KGM) limit its industrial application. Microbial degradation of low-molecular-weight KGM has health benefits and various biological functions; however, the available KGM strains used in the industry have microbial contamination and low degradation efficiencies. Therefore, exploring novelly adaptable strains is critical for industrial processes. Here, the Bacillus licheniformis Z7-1 strain isolated from decaying konjac showed high efficiency for KGM degradation. The monosaccharide composition of the degradation products had a reduced molar ratio of mannose to glucose, indicating that Z7-1 preferentially degraded glucose in KGM. The degraded component was further characterized by ESI-MS, Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM), and it also exhibited good antibacterial activity against various food-spoilage bacteria. Genome sequencing and zymolytic analysis revealed that abundant carbohydrate-active enzymes exist in the Z7-1 genome, with at least five types of extracellular enzymes responsible for KGM degradation, manifesting multi-enzyme synergetic action. The extracellular enzymes had significant thermal stability, indicating their potential application in industry. This study provides an alternative method for obtaining low-molecular-weight KGM with antibacterial functions and supports foundational knowledge for its development as a biocatalyst for the direct conversion of biomass polysaccharides into functional components. [ABSTRACT FROM AUTHOR]

Due to the growing concerns surrounding microbial contamination and food safety, there has been a surge of interest in fabricating novel food packaging with highly efficient antibacterial activity. Herein, we describe novel photodynamic antibacterial konjac glucomannan (KGM)/polyvinylpyrrolidone (PVP) nanofibers incorporated with lignin-zinc oxide composite nanoparticles (L-ZnONPs) and curcumin (Cur) via electrospinning technology. The resulting KGM/PVP/Cur/L-ZnONPs nanofibers exhibited favorable hydrophobic properties (water contact angle: 118.1°), thermal stability, and flexibility (elongation at break: 241.9%). Notably, the inclusion of L-ZnONPs and Cur endowed the nanofibers with remarkable antioxidant (ABTS radical scavenging activity: 98.1%) and photodynamic antimicrobial properties, demonstrating enhanced inhibitory effect against both Staphylococcus aureus (inhibition: 12.4 mm) and Escherichia coli (12.1 mm). As a proof-of-concept study, we evaluated the feasibility of applying nanofibers to fresh strawberries, and the findings demonstrated that our nanofibers could delay strawberry spoilage and inhibit microbial growth. This photodynamic antimicrobial approach holds promise for design of highly efficient antibacterial food packaging, thereby contributing to enhanced food safety and quality assurance. [ABSTRACT FROM AUTHOR]

Dendrobium nobile Lindl. polysaccharide (DNP1) showed good anti-inflammatory activity in our previous study. In this study, the structural characterization of DNP1 and its mode of action on TLR4 were investigated. Structural characterization suggested that DNP1 was a linear glucomannan composed of (1 → 4)-β-Manp and (1 → 4)-β-Glcp residues, and the acetyl group was linked to the C-2 of Manp. The possible repeating structural units of DNP1 were [→4)-2-OAc-β-Manp-(1→]3 →4)-β-Glcp-(1→. Surface plasmon resonance (SPR) binding test results showed that DNP1 did not bind directly to TLR4. The TLR4 and MD2 receptor blocking tests confirmed that DNP1 needs MD2 and TLR4 to participate in its anti-inflammatory effect. The binding energy of DNP1 to TLR4-MD2 was −7.9 kcal/mol, indicating that DNP1 could bind to the TLR4-MD2 complex stably. Therefore, it is concluded that DNP1 may play an immunomodulatory role by binding to the TLR4-MD2 complex and inhibiting the TLR4-MD2-mediated signaling pathway. [ABSTRACT FROM AUTHOR]

Soy protein isolate (SPI) possesses potential gelling properties, making it suitable for gel-based applications. However, the gel network stability and mechanical properties of SPI are relatively poor and can be improved through modifications or by combining it with other polymers, such as Konjac Glucomannan (KGM). Combining SPI with KGM can overcome the poor gel network stability and mechanical properties of SPI, but it reduces the water-absorbing capacity of the gel network after drying, which affects the quality characteristics of plant-based protein rehydrated foods and limits the economic feasibility of soy protein foods. In this study, SPI and KGM are the main research objects. By using the alkali method to construct SPI/KGM dry gels with good gel properties, the influence of different ultrasonic powers on the rehydration kinetics and performance changes of SPI/KGM dry gels is examined. The speed and state of water entering the pores are simulated by constructing different pore-size capillary filling models, and the rehydration mechanism of the gel is elucidated. This study provides research ideas and a theoretical basis for the application of ultrasonic wave technology in the study of dry product rehydration performance.

Instant dry rice noodles have a broad market prospect due to their advantages of long shelf life, convenient transportation, and convenient eating, but there are still quality problems such as long rehydration times and poor eating quality. In order to improve the quality of instant dry rice noodles, the effects of konjac glucomannan (KGM) on the gelatinization characteristics, pasting properties, and rheological properties of Indica rice flour and the structure, food quality, and starch digestibility of instant dry rice noodles made of Indica rice flour were studied. The results showed that the starch gelatinization conclusion temperature and endothermic enthalpy of Indica rice flour were reduced by adding ≤ 3% KGM, the peak viscosity, valley viscosity, final viscosity, and setback value of Indica rice flour in the pasting process decreased with the increase in the KGM addition amount, and the pseudoplasticity, viscosity, and elasticity of Indica rice flour paste were reduced by adding > 1% KGM. When the KGM addition amount was 2%, the endothermic enthalpy, final viscosity, and setback value of Indica rice flour were 2.74 J/g, 2379.5 cp, and 961.5 cp, respectively. The instant dry rice noodles made of Indica rice flour had a looser microstructure after adding KGM, and its short-range ordered structure and double helix content were reduced by adding 1~3% KGM. When the KGM addition amount was 2%, the rehydration time of instant dry rice noodles was 290 s, which was shortened by 14.7%, while the texture and sensory quality remained unchanged, and the SDS content was reduced by 16.4% while the RS content was increased by 28.8%. Therefore, the physicochemical properties of Indica rice flour and the quality of its instant dry rice noodles can be improved by adding an appropriate amount of KGM. This study can promote the application of KGM in improving the quality of rice products.

Improving the taste quality of rice porridge in a scientific way is essential to guiding residential and commercial production. This study aimed to determine the impact of konjac glucomannan (KGM) on the taste quality of rice porridge. The obtained results showed that the optimal concentration of KGM added to rice porridge is 1%. This was primarily observed via the reduction in water absorption, swelling power, and iodine blue value, thus increasing the hardness of rice porridge. At the same time, KGM also reduced the free water content and improved the water-holding capacity of rice porridge. Nevertheless, the pasting properties showed that the high viscosity of KGM raised the pasting viscosity of rice flour, thereby enhancing the stickiness of rice porridge with the increase in the KGM concentration. In addition, KGM gave the rice porridge a stronger aroma. Sensory evaluations further confirmed significant improvements in the color, odor, palatability, and overall acceptability of KGM-supplemented rice porridge (p < 0.05). To summarize, adding an appropriate amount of KGM was beneficial in forming a richer flavor and improving the taste quality of rice porridge. The findings offer valuable insights into the scientific processing of rice porridge products.

In this study, the effect of konjac glucomannan (KGM, 0–5%) on the structure, physicochemical properties, and in vitro digestibility of extruded yam starch (EYS) was investigated. The EYS became rougher on the surface and the particle size increased as observed using scanning electron microscopy and particle size analysis. X-ray diffraction and Raman results revealed that the relative crystallinity (18.30% to 22.30%) of EYS increased, and the full width at half maxima at 480 cm−1 decreased with increasing KGM content, indicating the increment of long-range and short-range ordered structure. Differential scanning calorimetry and rheological results demonstrated that KGM enhanced thermal stability and the gel strength of EYS due to enhanced interaction between KGM and YS molecules. Additionally, a decrease in the swelling power and viscosity of EYS was observed with increased KGM content. The inclusion of KGM in the EYS increased the resistant starch content from 11.89% to 43.51%. This study provides a dual-modified method using extrusion and KGM for modified YS with high thermal stability, gel strength, and resistance to digestion. [ABSTRACT FROM AUTHOR]

In this study, nanofiber films were prepared by electrospinning technology with polyvinyl alcohol (PVA) and konjac glucomannan (KGM) as raw materials. Tea polyphenols (TPs) were incorporated in the above matrix, which increased physicochemical (thermal and mechanical characteristics) and antibacterial properties of the nanofiber films. The release behavior of phenolic compounds from PVA/KGM-TPs nanofiber films was determined in different food simulants; antioxidant and antibacterial activity of the films were also evaluated. The results showed that the addition of KGM increased the physical and chemical properties of the films. The tensile strength (TS) and elongation at break (EB) increased from 5.40 ± 0.33 to 10.62 ± 0.34 and from 7.24 ± 0.32 to 18.10 ± 0.91, respectively. PVA/KGM-TPs nanofiber films performed controlled release of TPs, with final release of 49.17% in 3% acetic acid, 43.6% in 10% ethanol, and 59.42% in 95% ethanol. The nanofiber films showed good antioxidation properties, with the free radical scavenging rate increasing from 1.33% to 25.61%, and good antibacterial properties with inhibition zones against E. coli and S. aureus of 24.33 ± 0.47 mm and 34.33 ± 0.94 mm, respectively. In addition, the as-prepared films showed significant preservation performance for raw bananas at 25 °C. [ABSTRACT FROM AUTHOR]

The impact of konjac glucomannan (KGM)-based synbiotics on yogurt quality is not well understood. This study investigated the effects of a synbiotic mixture of KGM and the selected probiotic Lactiplantibacillus plantarum SHY130 on the physicochemical, antioxidant, and sensory properties of yogurt. The results showed that KGM significantly promoted the growth of Lactiplantibacillus plantarum SHY130. The synbiotics dramatically enhanced the count of lactic acid bacteria in yogurt during the 14 days of storage. Texture analysis indicated that the synbiotic supplement had no impact on springiness and cohesiveness but resulted in notable reductions in hardness, gumminess, and chewiness. The synbiotics did not significantly affect the water-holding capacity and syneresis. While the synbiotics initially decreased yogurt viscosity, it increased with storage time. Furthermore, the synbiotics significantly improved the yogurt’s antioxidant capacity. Additionally, the supplementation of the synbiotics did not adversely affect sensory properties, although the synbiotics containing 0.02% KGM negatively impacted overall acceptability. Overall, these findings elucidate the effects of KGM-based synbiotics on yogurt quality, providing a foundation for developing novel synbiotic yogurt products.

Three mannan polysaccharides and their oligosaccharides were investigated in terms of physicochemical characteristics and effects on gut microbiota. Oligosaccharides from guar gum had the fastest fermentation kinetics for SCFAs generation at the initial stage, while the locust bean of both polymers and oligosaccharides demonstrated the lowest SCFAs through the whole fermentation process. In contrast, konjac gum steadily increased SCFAs and reached its maximum level at 24 h fermentation, indicating its fermentation character may be associated with its rheological properties. Compared to their corresponding polysaccharides, all the oligosaccharides demonstrated a faster fermentation kinetics, followed by an enriched abundance of propionate-producing bacterial Prevotella and a decreased abundance of Megamonas and Collinsella. Meanwhile, oligosaccharides reduced the Firmicutes/Bacteroidota ratio as well as the abundance of Bacteroidetes and Escherichia-Shigella. The fermentation of konjac substrate significantly promoted the abundance of butyrate-producing bacterial Faecalibacterium. In contrast, although the fermentation of locust bean and guar gum substrates benefited Bifidobacterium abundance due to their similar structure and monosaccharides composition, the fermentation of locust bean gum led to greater Bifidobacterium than the others, which may be associated with its higher mannose composition in the molecules. Interestingly, the partial hydrolysis of the three polysaccharides slightly reduced their prebiotic function. [ABSTRACT FROM AUTHOR]

This research aimed to develop jelly soup for dysphagia patients at the International Dysphagia Diet Standardization Initiative (IDDSI) Framework levels 4 (puree) and 5 (minced and moist), who require swallow training to regain normal swallowing ability due to neurological issues. The study comprised three main parts: (1) an investigation of hydrocolloid types and concentrations for texture-modified foods to aid dysphagia patients during training; (2) a study of sterilization conditions and ascorbic acid's impact on physical properties (e.g., texture, viscosity, color) of the texture-modified foods; and (3) an evaluation of changes in physical, chemical, and microbial properties of the product during storage. Results revealed that the ideal recipe involved using pork bone broth with 1% κ-carrageenan for texture modification, which closely matched the properties of hospital jelly samples in terms of hardness, adhesiveness, and viscosity. Sterilization at 110 °C for 109 min effectively eliminated microorganisms without affecting the product's appearance or texture, albeit causing a slight increase in brownness. Adding ascorbic acid helped to prevent the Maillard reaction but reduced the gel strength of the sample and induced milk protein denaturation, leading to aggregation. During storage at room temperature for 9 weeks, the product became browner and less firm. Notably, no bacteria were detected throughout this period. In conclusion, this heating process is suitable for producing jelly soup to support swallow training for dysphagia patients with neurological problems. It offers invaluable assistance in their daily training to regain normal swallowing function. [ABSTRACT FROM AUTHOR]

To improve the quality of the characteristics of yellow alkaline noodles and enrich their nutritional value, konjac glucomannan (KGM) with or without chitosan coating were added to noodles, and their application effects were investigated in terms of color, texture, water absorption, starch digestion, total plate count (TPC) and microstructure. Chitosan–konjac glucomannan (CK) complex was firstly prepared by embedding konjac powder with chitosan sol. After embedding, the hydrophilicity of KGM decreased significantly. Then, either CK or native KGM were mixed evenly with flour before saline water, and soda was subsequently added to produce noodles. Compared with native KGM, CK provided the noodles with a higher brightness and a lighter yellow color. In terms of texture properties, although the firmness of CK noodles was weaker than that of KGM noodles, the tensile properties were enhanced. After embedding, the water absorption of CK noodles decreased and the content of resistant starch (RS) in the noodles increased. During storage, the TPC in CK noodles was significantly lower than that in KGM noodles. At a CK content of 5%, the noodles presented a lightness of 87.41, a b value of 17.75, a shear work of 39.9 g·cm, a tensile distance of 84.28 cm, a water absorption of 69.48%, a RS content of 17.97% and a TPC of 2.74 lg CFU/g at 10 days. In general, KGM with chitosan coating could improve the physicochemical qualities of noodles and extend their shelf life to a certain extent. [ABSTRACT FROM AUTHOR]

The aim of this work was to study the physical stability and rheological properties of an oil-in-water emulsion stabilized by a konjac glucomannan–whey protein (KGM-WP) mixture at a konjac glucomannan concentration of 0.1–0.5% (w/w) and a whey protein concentration of 1.0–3.0% (w/w). The droplet size, microstructure, stackability, flow behavior, and viscoelastic properties were measured. The experimental results showed that with an increase in KGM and WP concentrations, the droplet size (D4,3) of the emulsion gradually decreased to 12.9 μm, and the macroscopic performance of the emulsion was a gel-like structure that can be inverted and resist flow and can also be extruded and stacked. The static shear viscosity and viscoelasticity generally increased with the increase of konjac glucomannan and whey protein concentration. Emulsions were pseudo-plastic fluids with shear thinning behavior (flow behavior index: 0.15 ≤ n ≤ 0.49) and exhibited viscoelastic behavior with a storage modulus (G′) greater than their loss modulus (G″), indicating that the samples all had gel-like behavior (0.10 < n′ < 0.22). Moreover, storage modulus and loss modulus of all samples increased with increasing KGM and WP concentrations. When the concentration of konjac glucomannan was 0.3% w/w, the emulsion had similar rheological behavior to commercial mayonnaise. These results suggested that the KGM-WP mixture can be used as an effective substitute for egg yolk to make a cholesterol-free mayonnaise-like emulsion. The knowledge obtained here had important implications for the application of protein–polysaccharide mixtures as emulsifiers/stabilizers to make mayonnaise-like emulsions in sauce and condiments. [ABSTRACT FROM AUTHOR]

Due to the growing concerns surrounding microbial contamination and food safety, there has been a surge of interest in fabricating novel food packaging with highly efficient antibacterial activity. Herein, we describe novel photodynamic antibacterial konjac glucomannan (KGM)/polyvinylpyrrolidone (PVP) nanofibers incorporated with lignin-zinc oxide composite nanoparticles (L-ZnONPs) and curcumin (Cur) via electrospinning technology. The resulting KGM/PVP/Cur/L-ZnONPs nanofibers exhibited favorable hydrophobic properties (water contact angle: 118.1°), thermal stability, and flexibility (elongation at break: 241.9%). Notably, the inclusion of L-ZnONPs and Cur endowed the nanofibers with remarkable antioxidant (ABTS radical scavenging activity: 98.1%) and photodynamic antimicrobial properties, demonstrating enhanced inhibitory effect against both Staphylococcus aureus (inhibition: 12.4 mm) and Escherichia coli (12.1 mm). As a proof-of-concept study, we evaluated the feasibility of applying nanofibers to fresh strawberries, and the findings demonstrated that our nanofibers could delay strawberry spoilage and inhibit microbial growth. This photodynamic antimicrobial approach holds promise for design of highly efficient antibacterial food packaging, thereby contributing to enhanced food safety and quality assurance.

The large molecular weight and high viscosity of natural konjac glucomannan (KGM) limit its industrial application. Microbial degradation of low-molecular-weight KGM has health benefits and various biological functions; however, the available KGM strains used in the industry have microbial contamination and low degradation efficiencies. Therefore, exploring novelly adaptable strains is critical for industrial processes. Here, the Bacillus licheniformis Z7-1 strain isolated from decaying konjac showed high efficiency for KGM degradation. The monosaccharide composition of the degradation products had a reduced molar ratio of mannose to glucose, indicating that Z7-1 preferentially degraded glucose in KGM. The degraded component was further characterized by ESI-MS, Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM), and it also exhibited good antibacterial activity against various food-spoilage bacteria. Genome sequencing and zymolytic analysis revealed that abundant carbohydrate-active enzymes exist in the Z7-1 genome, with at least five types of extracellular enzymes responsible for KGM degradation, manifesting multi-enzyme synergetic action. The extracellular enzymes had significant thermal stability, indicating their potential application in industry. This study provides an alternative method for obtaining low-molecular-weight KGM with antibacterial functions and supports foundational knowledge for its development as a biocatalyst for the direct conversion of biomass polysaccharides into functional components.

Obesity and its associated complications require various lifestyle changes and treatment options. Dietary supplements are considered an attractive alternative to traditional therapy, mainly because they are accessible to the general population. The aim of this study was to investigate the additive effects of a combination of energy restriction (ER) and four dietary supplements on changes in the anthropometric and biochemical parameters in 100 overweight or obese participants who were randomly assigned one of the dietary fibre supplements containing different dietary fibres or a placebo for 8 weeks. The results confirmed that fibre supplements plus ER significantly (p < 0.01) reduced the body weight, body mass index (BMI), fat mass, and visceral fat and ameliorated the lipid profile and inflammation at 4 and 8 weeks after the start of the study, while in the placebo group, significant differences in some parameters were observed only after 8 weeks of ER. A fibre supplement containing glucomannan, inulin, psyllium, and apple fibre was the most effective at reducing the BMI, body weight, and CRP (p = 0.018 for BMI and body weight and p = 0.034 for CRP compared to placebo at the end of the intervention). Overall, the results suggest that dietary fibre supplements in combination with ER may have additional effects on weight loss and the metabolic profile. Therefore, taking dietary fibre supplements may be a feasible approach to improve weight and metabolic health in obese and overweight individuals. [ABSTRACT FROM AUTHOR]

In this study, the effect of konjac glucomannan (KGM, 0–5%) on the structure, physicochemical properties, and in vitro digestibility of extruded yam starch (EYS) was investigated. The EYS became rougher on the surface and the particle size increased as observed using scanning electron microscopy and particle size analysis. X-ray diffraction and Raman results revealed that the relative crystallinity (18.30% to 22.30%) of EYS increased, and the full width at half maxima at 480 cm−1 decreased with increasing KGM content, indicating the increment of long-range and short-range ordered structure. Differential scanning calorimetry and rheological results demonstrated that KGM enhanced thermal stability and the gel strength of EYS due to enhanced interaction between KGM and YS molecules. Additionally, a decrease in the swelling power and viscosity of EYS was observed with increased KGM content. The inclusion of KGM in the EYS increased the resistant starch content from 11.89% to 43.51%. This study provides a dual-modified method using extrusion and KGM for modified YS with high thermal stability, gel strength, and resistance to digestion.

In this study, nanofiber films were prepared by electrospinning technology with polyvinyl alcohol (PVA) and konjac glucomannan (KGM) as raw materials. Tea polyphenols (TPs) were incorporated in the above matrix, which increased physicochemical (thermal and mechanical characteristics) and antibacterial properties of the nanofiber films. The release behavior of phenolic compounds from PVA/KGM-TPs nanofiber films was determined in different food simulants; antioxidant and antibacterial activity of the films were also evaluated. The results showed that the addition of KGM increased the physical and chemical properties of the films. The tensile strength (TS) and elongation at break (EB) increased from 5.40 ± 0.33 to 10.62 ± 0.34 and from 7.24 ± 0.32 to 18.10 ± 0.91, respectively. PVA/KGM-TPs nanofiber films performed controlled release of TPs, with final release of 49.17% in 3% acetic acid, 43.6% in 10% ethanol, and 59.42% in 95% ethanol. The nanofiber films showed good antioxidation properties, with the free radical scavenging rate increasing from 1.33% to 25.61%, and good antibacterial properties with inhibition zones against E. coli and S. aureus of 24.33 ± 0.47 mm and 34.33 ± 0.94 mm, respectively. In addition, the as-prepared films showed significant preservation performance for raw bananas at 25 °C.

Konjac glucomannan (KGM) is a natural polysaccharide extracted from konjac tubers that has a topological structure composed of glucose and mannose. KGM can be used as a gel carrier to load active molecules in food preservation. The three-dimensional gel network structure based on KGM provides good protection for the loaded active molecules and allows for sustained release, thus enhancing the antioxidant and antimicrobial activities of these molecules. KGM loaded with various active molecules has been used in aquatic foods preservation, with great potential for different food preservation applications. This review summarizes recent advances in KGM, including: (i) structural characterization, (ii) the formation mechanism, (iii) preparation methods, (iv) functional properties and (v) the preservation of aquatic food. [ABSTRACT FROM AUTHOR]

Dietary fiber has been widely used in designing foods with a high satiating capacity, as the use of satiety-enhancing food is considered to be a promising strategy for combating obesity and the overweight condition. In the present study, partially degraded konjac glucomannan (DKGM) diets with different water-holding capacities, swelling capacities, and viscosities were used to feed rats to investigate the effects of the fiber's physical properties in regulating the appetite response of the animals. The results showed that the mass and water content of the gastrointestinal chyme increased as the diet's physical properties were enhanced by the DKGM, which increased the stomach distention of the rats and promoted satiation. Besides, the hydrated DKGM elevated the chyme's viscosity, and the retention time of the digesta in the small intestine was prolonged significantly, which resulted in an increased concentration of cholecystokinin-8, glucagon-like peptide 1, and peptide tyrosine-tyrosine in the plasma, thus helping to maintain the satiety of rats. Furthermore, the results of the behavioral satiety sequence and meal pattern analysis showed that DKGM in the diets is more likely to reduce the food intake of rats by enhancing satiety rather than satiation, and will finally inhibit excessive weight gain. In conclusion, the physical properties of dietary fiber are highly related to the appetite response, which is a powerful tool in designing food with a high satiating capacity. [ABSTRACT FROM AUTHOR]

Effects of two high pressure processing treatments and various levels of konjac glucomannan (KGM) and sodium caseinate (SC) on texture properties, water-holding capacity, and ultra-structure of gels of rabbit myosin protein were investigated. The two high pressure processing treatments were as follows: (1) mean pressure (200 MPa), low temperature (37 °C), and holding for a short time (5 min) followed heating (80 °C for 40 min) (gel LP + H), and (2) high pressure (500 MPa), high temperature (60 °C), and holding for a long time (30 min) (gel HP). Gel LP + H have better gel properties (increased hardness, springiness, gumminess, adhesiveness, cohesiveness, and water binding capacity) than gels HP. Above all, gels myosin + SC:KGM (2:1) have best gel properties. KGM and SC both significantly improved the gel texture properties and water binding capacity. [ABSTRACT FROM AUTHOR]

Coating preservation has a remarkable effect on the preservation of aquatic products. This work prepared a composite coating using konjac glucomannan (KGM) as the film-forming matrix and ε-polylysine hydrochloride (ε-PL) and ferulic acid (FA) as the preservative. Three types of treated sea bass (KGM, KGM-ε-PL, and KGM-ε-PL-FA) and untreated sea bass were stored at 4 °C for 20 days to compare freshness changes under different treatment conditions. The results showed that the surface color and texture of sea bass in refrigerated storage changed dramatically and deteriorated as storage time increased. The composite coating treatment was significantly different from the control group. Using Gas-phase ion migration spectrometry (GC-IMS) technology, 32 volatile compounds, such as aldehydes, alcohols, and ketones, were found in fillets during flavor quality analysis. The composite coating can successfully inhibit the formation of odor compounds such as 2-nonenone, isoamyl alcohol monomer, ammonia, and trimethylamine, delaying the deterioration of fish and improving freshness. Among them, KGM-ε-PL-FA composite coating has the most remarkable preservation performance, which significantly inhibits the occurrence of rotten odor, and has a potential application prospect in the field of food preservation. [ABSTRACT FROM AUTHOR]

There are many factors causing T2DM; thus, it is difficult to prevent and cure it with conventional treatment. In order to realize the continuous intervention of T2DM, the treatment strategy of combining diet therapy and traditional medication came into being. As a natural product with the concept of being healthy, konjac flour and its derivatives are popular with the public. Its main component, Konjac glucomannan (KGM), can not only be applied as a food additive, which greatly improves the taste and flavor of food and extends the shelf life of food but also occupies an important role in T2DM. KGM can extend gastric emptying time, increase satiety, and promote liver glycogen synthesis, and also has the potential to improve intestinal flora and the metabolic system through a variety of molecular pathways in order to positively regulate oxidative stress and immune inflammation, and protect the liver and kidneys. In order to establish the theoretical justification for the adjunctive treatment of T2DM, we have outlined the physicochemical features of KGM in this article, emphasizing the advantages of KGM as a meal for special medical purposes of T2DM. [ABSTRACT FROM AUTHOR]

This research aimed to develop jelly soup for dysphagia patients at the International Dysphagia Diet Standardization Initiative (IDDSI) Framework levels 4 (puree) and 5 (minced and moist), who require swallow training to regain normal swallowing ability due to neurological issues. The study comprised three main parts: (1) an investigation of hydrocolloid types and concentrations for texture-modified foods to aid dysphagia patients during training; (2) a study of sterilization conditions and ascorbic acid’s impact on physical properties (e.g., texture, viscosity, color) of the texture-modified foods; and (3) an evaluation of changes in physical, chemical, and microbial properties of the product during storage. Results revealed that the ideal recipe involved using pork bone broth with 1% κ-carrageenan for texture modification, which closely matched the properties of hospital jelly samples in terms of hardness, adhesiveness, and viscosity. Sterilization at 110 °C for 109 min effectively eliminated microorganisms without affecting the product’s appearance or texture, albeit causing a slight increase in brownness. Adding ascorbic acid helped to prevent the Maillard reaction but reduced the gel strength of the sample and induced milk protein denaturation, leading to aggregation. During storage at room temperature for 9 weeks, the product became browner and less firm. Notably, no bacteria were detected throughout this period. In conclusion, this heating process is suitable for producing jelly soup to support swallow training for dysphagia patients with neurological problems. It offers invaluable assistance in their daily training to regain normal swallowing function.

To improve the quality of the characteristics of yellow alkaline noodles and enrich their nutritional value, konjac glucomannan (KGM) with or without chitosan coating were added to noodles, and their application effects were investigated in terms of color, texture, water absorption, starch digestion, total plate count (TPC) and microstructure. Chitosan–konjac glucomannan (CK) complex was firstly prepared by embedding konjac powder with chitosan sol. After embedding, the hydrophilicity of KGM decreased significantly. Then, either CK or native KGM were mixed evenly with flour before saline water, and soda was subsequently added to produce noodles. Compared with native KGM, CK provided the noodles with a higher brightness and a lighter yellow color. In terms of texture properties, although the firmness of CK noodles was weaker than that of KGM noodles, the tensile properties were enhanced. After embedding, the water absorption of CK noodles decreased and the content of resistant starch (RS) in the noodles increased. During storage, the TPC in CK noodles was significantly lower than that in KGM noodles. At a CK content of 5%, the noodles presented a lightness of 87.41, a b value of 17.75, a shear work of 39.9 g·cm, a tensile distance of 84.28 cm, a water absorption of 69.48%, a RS content of 17.97% and a TPC of 2.74 lg CFU/g at 10 days. In general, KGM with chitosan coating could improve the physicochemical qualities of noodles and extend their shelf life to a certain extent.

The aim of this work was to study the physical stability and rheological properties of an oil-in-water emulsion stabilized by a konjac glucomannan–whey protein (KGM-WP) mixture at a konjac glucomannan concentration of 0.1–0.5% (w/w) and a whey protein concentration of 1.0–3.0% (w/w). The droplet size, microstructure, stackability, flow behavior, and viscoelastic properties were measured. The experimental results showed that with an increase in KGM and WP concentrations, the droplet size (D4,3) of the emulsion gradually decreased to 12.9 μm, and the macroscopic performance of the emulsion was a gel-like structure that can be inverted and resist flow and can also be extruded and stacked. The static shear viscosity and viscoelasticity generally increased with the increase of konjac glucomannan and whey protein concentration. Emulsions were pseudo-plastic fluids with shear thinning behavior (flow behavior index: 0.15 ≤ n ≤ 0.49) and exhibited viscoelastic behavior with a storage modulus (G′) greater than their loss modulus (G″), indicating that the samples all had gel-like behavior (0.10 < n′ < 0.22). Moreover, storage modulus and loss modulus of all samples increased with increasing KGM and WP concentrations. When the concentration of konjac glucomannan was 0.3% w/w, the emulsion had similar rheological behavior to commercial mayonnaise. These results suggested that the KGM-WP mixture can be used as an effective substitute for egg yolk to make a cholesterol-free mayonnaise-like emulsion. The knowledge obtained here had important implications for the application of protein–polysaccharide mixtures as emulsifiers/stabilizers to make mayonnaise-like emulsions in sauce and condiments.

The effect of konjac glucomannan (KGM) on the retrogradation of amylose was explored during storage. The color, rheological properties, texture, water-holding capacity (WHC), low-field nuclear magnetic resonance (LF-NMR), and X-ray diffraction (XRD) were investigated. Results of color and rheological measurements showed that with the increasing amount of KGM, the L value of the system decreased, but the elastic modulus, viscous modulus, and tangent value of loss angle increased. The textural result presented that KGM obviously inhibited the growth rate of gel strength of amylose. Results from WHC and XRD suggested after 14 days of storage, when the concentration of KGM increased from zero to 0.3% in the mixture, the WHC grew from 80% to 95% and the crystallinity degree declined from 35.3% to 25.6%. The LF-NMR result revealed that KGM limited the conversion of free water to bound water in the system. In general, a small amount of KGM in a mixed system could inhibit the short-term and long-term retrogradation of amylose. This research could provide a theoretical reference for the influence of hydrophilic colloids on the retrogradation of starch, and it could also provide support for the processing and production of starch-based food. [ABSTRACT FROM AUTHOR]

Antarctic krill is a potential and attractive resource for consumption. However, most Antarctic krill meat is used to produce primary products with low commercial value, with few highly processed products. This study aimed to evaluate and improve the gelling properties of Antarctic krill surimi, with Pacific white shrimp surimi as control. Compared with Pacific white shrimp surimi, the lower β-sheet content and protein aggregation degree had a severe impact on the formation of the gel network of Antarctic krill surimi, which resulted in weaker breaking force, gel strength, and viscoelasticity (p < 0.05). Moreover, water retention capacity and molecular forces had a positive effect on the stability of the gel matrix of shrimp surimi. Thus, the high α-helix/β-sheet ratio, weak intermolecular interactions, and low level of protein network cross-linkage were the main reasons for the poor quality of Antarctic krill surimi. On this basis, the effects of six polysaccharides on the texture properties of Antarctic krill surimi were studied. Chitosan, konjac glucomannan, sodium carboxyl methyl cellulose, and waxy maize starch resulted in no significant improvement in the texture properties of Antarctic krill surimi (p > 0.05). However, the addition of ι-carrageenan (2%) or κ-carrageenan (1~2%) is an effective way to improve the texture properties of Antarctic krill surimi (p < 0.05). These findings will contribute to the development of reconstituted Antarctic krill surimi products with high nutritional quality and the promotion of deep-processing products of Antarctic krill meat. [ABSTRACT FROM AUTHOR]

An active coating is one of the best ways to maintain the good quality and sensory properties of fruits. A new active coating was prepared by incorporating curcumin and phloretin into the konjac glucomannan matrix (KGM-Cur-Phl). The fourier infrared spectroscopy, rheology and differential scanning calorimetry confirmed the successful fabrication of this coating. This coating showed excellent antioxidant activity revealed by the 95.03% of ABTS radicals scavenging ratio and 99.67% of DPPH radicals scavenging ratio. The result of bacteria growth curves showed that it could effectively inhibit the growth of Staphylococcus aureus, Escherichia coli, Listeria monocytogenes and Salmonella typhimurium. The results of firmness, titratable acid and pH showed that it effectively prolonged the shelf life of kumquat. A novel konjac glucomannan-based active coating was provided. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the effects of konjac glucomannan (KGM) on oil absorption and the formation of safety hazard factors in fried battered fish nuggets by measuring advanced glycation end products (AGEs) and acrylamide contents. Other physicochemical properties were determined to explore the reason for oil absorption and formation of safety hazard factors. The acrylamide was found mainly in the crust. The addition of 0.8% KGM could significantly reduce the acrylamide content (p < 0.05). For the battered sample, the AGEs content was far lower than the unbattered. The addition of 0.8% KGM could significantly reduce the AGEs content in the inner layer (p < 0.05). The microstructure showed that the sample with 0.8% KGM had the most compact crust. The compact crust reduced oil and malondialdehyde contents. Combined with the other indicators, the inhibitory effect of 0.8% KGM on acrylamide was closely related with the decreased extent of oil oxidation and Maillard reaction in the samples with 0.8% KGM. The inhibitory effect of 0.8% KGM on AGEs might originate from its lower oil content. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the sensory profile of gluten-free bread with Amorphophallus konjac (AK) flour in different concentrations. This experimental study is divided into three steps: preparation of the gluten-free bread formulations, sensory analysis, and statistical analysis. The addition of Konjac flour in a gluten-free bread formulation was tested in different proportions, 12.5%, 25%, 37.5%, and 50% of the flour content. The checking all-that-apply (CATA) was conducted with 110 panelists; among these, 43 were consumers of gluten-free bread. Sensory analysis was conducted using a 9-point hedonic scale for color, aroma, texture, flavor, appearance, and overall acceptability. The AK flour influenced the sensory characteristics of gluten-free bread. Bread with characteristics closer to those found in bread with gluten was the one with 12.5% of konjac flour for both the acceptability analysis as the attributes raised through a detailed CATA map. The control sample is located next to features like dry appearance, dry texture and grainy, dark color, and salty. Therefore, 12.5% AK gluten-free bread is closer to the characteristics of the control sample, such as light crust color, light crumb color, soft and moist texture, cohesion, and brightness. The bread with the highest percentage of overall consumer acceptance was 12.5% konjac with 93% and 96% acceptance among consumers and non-consumers of gluten-free bread, respectively. [ABSTRACT FROM AUTHOR]

Obesity and its associated complications require various lifestyle changes and treatment options. Dietary supplements are considered an attractive alternative to traditional therapy, mainly because they are accessible to the general population. The aim of this study was to investigate the additive effects of a combination of energy restriction (ER) and four dietary supplements on changes in the anthropometric and biochemical parameters in 100 overweight or obese participants who were randomly assigned one of the dietary fibre supplements containing different dietary fibres or a placebo for 8 weeks. The results confirmed that fibre supplements plus ER significantly (p < 0.01) reduced the body weight, body mass index (BMI), fat mass, and visceral fat and ameliorated the lipid profile and inflammation at 4 and 8 weeks after the start of the study, while in the placebo group, significant differences in some parameters were observed only after 8 weeks of ER. A fibre supplement containing glucomannan, inulin, psyllium, and apple fibre was the most effective at reducing the BMI, body weight, and CRP (p = 0.018 for BMI and body weight and p = 0.034 for CRP compared to placebo at the end of the intervention). Overall, the results suggest that dietary fibre supplements in combination with ER may have additional effects on weight loss and the metabolic profile. Therefore, taking dietary fibre supplements may be a feasible approach to improve weight and metabolic health in obese and overweight individuals.

Konjac glucomannan (KGM) is a natural polysaccharide extracted from konjac tubers that has a topological structure composed of glucose and mannose. KGM can be used as a gel carrier to load active molecules in food preservation. The three-dimensional gel network structure based on KGM provides good protection for the loaded active molecules and allows for sustained release, thus enhancing the antioxidant and antimicrobial activities of these molecules. KGM loaded with various active molecules has been used in aquatic foods preservation, with great potential for different food preservation applications. This review summarizes recent advances in KGM, including: (i) structural characterization, (ii) the formation mechanism, (iii) preparation methods, (iv) functional properties and (v) the preservation of aquatic food.

Effects of two high pressure processing treatments and various levels of konjac glucomannan (KGM) and sodium caseinate (SC) on texture properties, water-holding capacity, and ultra-structure of gels of rabbit myosin protein were investigated. The two high pressure processing treatments were as follows: (1) mean pressure (200 MPa), low temperature (37 °C), and holding for a short time (5 min) followed heating (80 °C for 40 min) (gel LP + H), and (2) high pressure (500 MPa), high temperature (60 °C), and holding for a long time (30 min) (gel HP). Gel LP + H have better gel properties (increased hardness, springiness, gumminess, adhesiveness, cohesiveness, and water binding capacity) than gels HP. Above all, gels myosin + SC:KGM (2:1) have best gel properties. KGM and SC both significantly improved the gel texture properties and water binding capacity.

Dietary fiber has been widely used in designing foods with a high satiating capacity, as the use of satiety-enhancing food is considered to be a promising strategy for combating obesity and the overweight condition. In the present study, partially degraded konjac glucomannan (DKGM) diets with different water-holding capacities, swelling capacities, and viscosities were used to feed rats to investigate the effects of the fiber’s physical properties in regulating the appetite response of the animals. The results showed that the mass and water content of the gastrointestinal chyme increased as the diet’s physical properties were enhanced by the DKGM, which increased the stomach distention of the rats and promoted satiation. Besides, the hydrated DKGM elevated the chyme’s viscosity, and the retention time of the digesta in the small intestine was prolonged significantly, which resulted in an increased concentration of cholecystokinin-8, glucagon-like peptide 1, and peptide tyrosine-tyrosine in the plasma, thus helping to maintain the satiety of rats. Furthermore, the results of the behavioral satiety sequence and meal pattern analysis showed that DKGM in the diets is more likely to reduce the food intake of rats by enhancing satiety rather than satiation, and will finally inhibit excessive weight gain. In conclusion, the physical properties of dietary fiber are highly related to the appetite response, which is a powerful tool in designing food with a high satiating capacity.

Coating preservation has a remarkable effect on the preservation of aquatic products. This work prepared a composite coating using konjac glucomannan (KGM) as the film-forming matrix and ε-polylysine hydrochloride (ε-PL) and ferulic acid (FA) as the preservative. Three types of treated sea bass (KGM, KGM-ε-PL, and KGM-ε-PL-FA) and untreated sea bass were stored at 4 °C for 20 days to compare freshness changes under different treatment conditions. The results showed that the surface color and texture of sea bass in refrigerated storage changed dramatically and deteriorated as storage time increased. The composite coating treatment was significantly different from the control group. Using Gas-phase ion migration spectrometry (GC-IMS) technology, 32 volatile compounds, such as aldehydes, alcohols, and ketones, were found in fillets during flavor quality analysis. The composite coating can successfully inhibit the formation of odor compounds such as 2-nonenone, isoamyl alcohol monomer, ammonia, and trimethylamine, delaying the deterioration of fish and improving freshness. Among them, KGM-ε-PL-FA composite coating has the most remarkable preservation performance, which significantly inhibits the occurrence of rotten odor, and has a potential application prospect in the field of food preservation.

There are many factors causing T2DM; thus, it is difficult to prevent and cure it with conventional treatment. In order to realize the continuous intervention of T2DM, the treatment strategy of combining diet therapy and traditional medication came into being. As a natural product with the concept of being healthy, konjac flour and its derivatives are popular with the public. Its main component, Konjac glucomannan (KGM), can not only be applied as a food additive, which greatly improves the taste and flavor of food and extends the shelf life of food but also occupies an important role in T2DM. KGM can extend gastric emptying time, increase satiety, and promote liver glycogen synthesis, and also has the potential to improve intestinal flora and the metabolic system through a variety of molecular pathways in order to positively regulate oxidative stress and immune inflammation, and protect the liver and kidneys. In order to establish the theoretical justification for the adjunctive treatment of T2DM, we have outlined the physicochemical features of KGM in this article, emphasizing the advantages of KGM as a meal for special medical purposes of T2DM.

The effect of konjac glucomannan (KGM) on the retrogradation of amylose was explored during storage. The color, rheological properties, texture, water-holding capacity (WHC), low-field nuclear magnetic resonance (LF-NMR), and X-ray diffraction (XRD) were investigated. Results of color and rheological measurements showed that with the increasing amount of KGM, the L value of the system decreased, but the elastic modulus, viscous modulus, and tangent value of loss angle increased. The textural result presented that KGM obviously inhibited the growth rate of gel strength of amylose. Results from WHC and XRD suggested after 14 days of storage, when the concentration of KGM increased from zero to 0.3% in the mixture, the WHC grew from 80% to 95% and the crystallinity degree declined from 35.3% to 25.6%. The LF-NMR result revealed that KGM limited the conversion of free water to bound water in the system. In general, a small amount of KGM in a mixed system could inhibit the short-term and long-term retrogradation of amylose. This research could provide a theoretical reference for the influence of hydrophilic colloids on the retrogradation of starch, and it could also provide support for the processing and production of starch-based food.

An active coating is one of the best ways to maintain the good quality and sensory properties of fruits. A new active coating was prepared by incorporating curcumin and phloretin into the konjac glucomannan matrix (KGM-Cur-Phl). The fourier infrared spectroscopy, rheology and differential scanning calorimetry confirmed the successful fabrication of this coating. This coating showed excellent antioxidant activity revealed by the 95.03% of ABTS radicals scavenging ratio and 99.67% of DPPH radicals scavenging ratio. The result of bacteria growth curves showed that it could effectively inhibit the growth of Staphylococcus aureus, Escherichia coli, Listeria monocytogenes and Salmonella typhimurium. The results of firmness, titratable acid and pH showed that it effectively prolonged the shelf life of kumquat. A novel konjac glucomannan-based active coating was provided.

This study aimed to evaluate the sensory profile of gluten-free bread with Amorphophallus konjac (AK) flour in different concentrations. This experimental study is divided into three steps: preparation of the gluten-free bread formulations, sensory analysis, and statistical analysis. The addition of Konjac flour in a gluten-free bread formulation was tested in different proportions, 12.5%, 25%, 37.5%, and 50% of the flour content. The checking all-that-apply (CATA) was conducted with 110 panelists; among these, 43 were consumers of gluten-free bread. Sensory analysis was conducted using a 9-point hedonic scale for color, aroma, texture, flavor, appearance, and overall acceptability. The AK flour influenced the sensory characteristics of gluten-free bread. Bread with characteristics closer to those found in bread with gluten was the one with 12.5% of konjac flour for both the acceptability analysis as the attributes raised through a detailed CATA map. The control sample is located next to features like dry appearance, dry texture and grainy, dark color, and salty. Therefore, 12.5% AK gluten-free bread is closer to the characteristics of the control sample, such as light crust color, light crumb color, soft and moist texture, cohesion, and brightness. The bread with the highest percentage of overall consumer acceptance was 12.5% konjac with 93% and 96% acceptance among consumers and non-consumers of gluten-free bread, respectively.

The purpose of this study was to investigate the effects of konjac glucomannan (KGM) on oil absorption and the formation of safety hazard factors in fried battered fish nuggets by measuring advanced glycation end products (AGEs) and acrylamide contents. Other physicochemical properties were determined to explore the reason for oil absorption and formation of safety hazard factors. The acrylamide was found mainly in the crust. The addition of 0.8% KGM could significantly reduce the acrylamide content (p < 0.05). For the battered sample, the AGEs content was far lower than the unbattered. The addition of 0.8% KGM could significantly reduce the AGEs content in the inner layer (p < 0.05). The microstructure showed that the sample with 0.8% KGM had the most compact crust. The compact crust reduced oil and malondialdehyde contents. Combined with the other indicators, the inhibitory effect of 0.8% KGM on acrylamide was closely related with the decreased extent of oil oxidation and Maillard reaction in the samples with 0.8% KGM. The inhibitory effect of 0.8% KGM on AGEs might originate from its lower oil content.

This present work investigated the influence of konjac glucomannan (KGM) enzymatic hydrolysates on the textural properties, microstructure, and water distribution of surimi gel from grass carp (Ctenopharyngodon idellus). The molecular weight (Mw) of KGM enzymatic hydrolyzed by β-dextranase degraded from 149.03 kDa to 36.84 kDa with increasing enzymatic time. In the microstructure of surimi gels, KGM enzymatic hydrolysates with higher Mw showed entangled rigid-chains, while KGM enzymatic hydrolysates with lower Mw (36.84 kDa) exhibited swelled fragments. The hardness of surimi gel with a decline in KGM Mw exhibited first increasing then decreasing trends, while the whiteness of surimi gel increased. When KGM Mw decreased, the immobile water percentage of total signals decreased from 96.7% to 93.6%, and mobile water increased from 3.03% to 6.37%. In particular, the surimi gel with the addition of K2 showed better gel strength and water distributions. KGM enzymatic hydrolysates are expected to be used as a low-calorie healthy gel enhancer in surimi processing.

The addition of hydrocolloid is an effective method to improve the properties of native starch. However, few studies have investigated the effects of konjac glucomannan (KGM) on canna starch (CS). In this study, the effects of various KGM concentration on the pasting, rheological, textural, and morphological properties of CS were investigated. The addition of KGM significantly increased CS’s pasting viscosities. Incorporation of KGM in CS at a relatively high level (1.2% w/w) exerted a significant influence on the pasting properties of CS. The consistency coefficient of CS was notably increased by KGM (from 43.6 to 143.3 Pa·sn) and positively correlated positive with KGM concentration. KGM concentration at a relatively high level (1.2% w/w) increased the elasticities and cohesiveness of CS by 53.3% and 88.0%, respectively, in texture profile analysis. The polarized optical microscope images indicated that KGM played an important part in protecting the crystalline structure of CS during heating. A denser porous microstructure with a filamentous network was observed in gelatinized KGM/CS mixtures as compared with the CS control. This research advances the knowledge of interactions between KGM and CS and opens possibilities to improve rheological properties of CS and to develop its new functionalities with KGM addition.

The increasing public awareness of health and sustainability has prompted the development of functional foods rich in health-promoting ingredients. Processing technologies and sustainable multifunctional ingredients are needed for structuring these formulations. Spruce galactoglucomannan (GGM), the main hemicelluloses in softwood cell walls, are an abundantly available, emerging sustainable food hydrocolloid that have the ability to efficiently emulsify and stabilize oil-in-water emulsions. In this study, we illustrate how this lignocellulosic stabilizer affects the digestion of polyunsaturated fatty acids (PUFAs) in vitro. A 100% decrease in the initial TAG content was observed during the in vitro digestion, suggesting that complete hydrolysis of the TAGs was achieved by the digestive enzymes. Besides, no release of mono-, di-, and oligosaccharides or phenolic compounds from GGM was detected. Our results demonstrate that the GGM-stabilized emulsion could potentially deliver lipophilic bioactive ingredients and enhance their bioaccessibility. In addition, this bio-stabilizer itself would remain stable in the upper gastrointestinal track and serve as a prebiotic for gut microbiota. We anticipate GGM to complement or even replace many of the conventional carriers of bioactive components in future health care products and functional foods.