Search

This study investigated the effects of incorporating sprouted chickpeas, at a 25% enrichment level, into bread production as either grits (90% of particles ≥500 µm) or flour (90% of particles ≤250 µm). The focus was to investigate the role of particle size on dough and bread. In addition to the functional, mixing and pasting properties of ingredients, gluten aggregation, mixing, extensional, leavening, and pasting properties of the blends were assessed during bread-making, as well as bread volume and texture. Chickpea particle size influenced water absorption capacity (1.8 for grits vs. 0.75 g/g for flour) and viscosity (245 for grits vs. 88 BU for flour), with flour showing a greater decrease in both properties. With regard to dough properties, dough development time (16.6 vs. 5.3 min), stability (14.6 vs. 4.6 min), and resistance to extension (319 vs. 235 BU) was higher, whereas extensibility was lower (105 vs. 152 mm) with grits, compared to flour. During bread-making, grits resulted in a higher specific volume (2.5 vs. 2.1 mL/g) and softer crumb (6.2 vs. 17.4 N) at all the considered storage times. In conclusion, sprouted chickpea grits can be effectively used as a new ingredient in bread-making favouring the consumption of chickpea, without compromising product quality. [ABSTRACT FROM AUTHOR]

The reduction of sodium chloride (NaCl) content, commonly known as salt, in processed meat products is one of the objectives of health organizations and government authorities to achieve healthier products. This reformulation of traditional meat products with protected designations poses more constraints, as they have a more consolidated quality image and less margin for change, since consumers appreciate the products for their unique sensory characteristics. The aim of this work is to present some of the strategies that have been explored to obtain meat products with low sodium content. Information related to the characteristics of traditional meat products with quality marks and geographical indications in different studies is discussed in opposition to the information recorded in their product specifications. It was found that the product specifications of meat products with Portuguese Protected Designation of Origin (PDO) and Protected Geographical Indication (PGI) show a wide variation in the NaCl content, much higher than the recommended values. Thus, one of the requirements to be implemented will be the parameterization of NaCl levels and their monitorization by control and certification organizations as a way to ensure product quality. It is also urgent to examine whether healthy innovation strategies may affect the quality of traditional PDO or PGI meat products and whether they can be included in the respective product specifications. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the impact of various drying methods: freeze drying, vacuum drying, convection drying, and convection-microwave drying at microwave powers of 50 W and 100 W, along with process temperatures (40 °C, 60 °C, and 80 °C), on the drying kinetics, selected physicochemical properties of dried celery stems, and their grindability. The Page model was employed to mathematically describe the drying kinetics across the entire measurement range. Convection-microwave drying significantly reduced the drying time compared to the other methods. The longest drying duration was observed with freeze drying at 40 °C. The product obtained through freeze drying at 40 °C exhibited the least alteration in color coordinates, the highest antioxidant capacity, and the greatest retention of chlorophylls and total carotenoids. At a specific temperature, the quality of the product obtained from vacuum drying was slightly lower compared to that from freeze drying. The most substantial changes in the physicochemical properties of the dried product were observed with convection-microwave drying at a microwave power of 100 W. The drying method selected had a significant impact on the energy consumption of grinding, average particle size, and the grinding energy index of the dried celery stems; these parameters worsened as the drying temperature increased. The product with the best quality characteristics and disintegration parameters was achieved using freeze drying at 40 °C. [ABSTRACT FROM AUTHOR]

Edible mushrooms are favored by consumers for their excellent nutritional value and pharmacological properties. However, fresh mushrooms are highly perishable and undergo rapid quality deterioration induced by a series of intrinsic and extrinsic factors during postharvest storage. In recent years, the application of natural products derived from plants, animals, microorganisms, and other sources in mushroom quality preservation has drawn increasing attention. Compared to chemical preservatives, natural products show similar or higher biological activity and have few side effects on human health. This review summarizes the recent advances in the application of natural products used for quality maintenance of postharvest mushrooms. These natural substances mainly include essential oils, polyphenols, polysaccharides, bacteriocins, and other extracts. They have the potential to inhibit mushroom weight loss, softening, and browning, reduce the count of pathogenic microorganisms, and retain nutrients and flavor, effectively improving the quality of mushrooms and extending their shelf-life. The preservation techniques for natural products and their preservation mechanisms are also discussed here. Overall, this review provides current knowledge about natural products in edible mushroom preservation and aims to inspire more in-depth theoretical research and promote further practical application. [ABSTRACT FROM AUTHOR]

The kelp gel edible granules developed utilizing the gel properties of alginate are prone to quality deterioration if improperly stored during the storage process. This study comprehensively investigated the quality changes of kelp gel edible granules stored at 4 °C and 25 °C by evaluating indicators such as total bacterial count, coliform bacteria, pH, relaxation time, color difference, appearance, texture characteristics, gel strength, and sensory scoring. The results showed that during the storage at 4 °C, the total bacterial count remained within the national standard range, the hardness and chewiness increased, the gel strength first increased and then decreased, the partial exudation of the bound water in the product occurred, and the sensory score slightly decreased, with an overall minor change in quality. During the storage at 25 °C, significant quality changes were observed, with the total bacterial count exceeding the national standard on the 20th day; additionally, the hardness, chewiness, and gel strength all initially increased and then decreased, both the bound water and the restrained water in the product exuded, the moisture stability decreased, and the sensory score significantly decreased between 16 to 20 days. The spoilage of the product was characterized by a significant water loss, reduction in volume, color change from bright green to dark yellow-brown, and a distinct smell of decaying algae. No coliform bacteria was detected in all products during the storage period. In summary, the shelf life endpoint of the product stored at 25 °C is 16 days, and the shelf life of the product stored at 4 °C is greater than 20 days. Storage at 4 °C can better maintain product quality, extend the shelf life, and effectively maintain the overall color of the product. [ABSTRACT FROM AUTHOR]

Plant protein-based foods have become dietary preferences worldwide, and the quality of this food group is highly associated with the ingredients used. This study investigated the effects of incorporating caramel, tomato powder, and carrot powder on the product quality of soy protein-based meat patties (SPMPs). The color, total phenolic content (TPC), antioxidant activity, lipid oxidation, and texture profile of uncooked and cooked soy protein meat patties were analyzed. Among the cooked SPMPs, caramel SPMPs exhibited the lowest color difference (ΔE) values, and the ΔE value of tomato SPMPs was lower than that of carrot SPMPs, indicating that caramel has the best color stability, and the tomato experienced less color change than the carrot during cooking. Notably, carrot SPMPs exhibited lower color stability during refrigeration storage than the others. Both carrot and tomato powders increased the total phenolic content (TPC) and antioxidant stability and inhibited lipid oxidation in SPMPs during cooking. However, tomato SPMPs exhibited higher TPC values and greater antioxidant stability compared to carrot SPMPs. The addition of caramel and carrot powders decreased the hardness of raw SPMPs, but tomato powder increased the hardness. The texture profile of tomato SPMPs was more affected by the cooking process compared to caramel and carrot SPMPs. This study showed that incorporating both carrot and tomato powders positively influenced the quality characteristics of SPMPs compared to caramel powder, however, tomato powder exhibited superior efficacy. [ABSTRACT FROM AUTHOR]

To improve product quality and obtain suitable processing parameters for crab apple slices (CASs) produced by continuous microwave drying (CMD), the effects of processing parameters, including slice thickness, microwave power, air velocity, and conveyor belt speed, on the evaluation indexes in terms of temperature, moisture content, color (L*, a*, b*), hardness, brittleness, and total phenolic content of CASs were investigated via the response surface method. The results indicated that microwave power has the greatest effect on the evaluation indexes applied to the CASs under CMD, followed by air velocity, slice thickness, and conveyor belt speed. To produce the desired product quality, the appropriate parameters for CMD of CASs were optimized as 1.25 mm slice thickness, 14,630 W microwave power, 0.50 m·s−1 air velocity, and 0.33 m·min−1 conveyor belt speed. Following that, the moisture content under CMD was found to be 13.53%, the desired color, hardness 0.79 g, brittleness 12.97 (number of peaks), and the total phenolic content 5.48 mg·g−1. This research provides a theoretical framework for optimizing the processing parameters of CASs using the response surface method. [ABSTRACT FROM AUTHOR]

This document provides a summary of various research studies and reviews related to milk and dairy products. It emphasizes the importance of producing these products in a sustainable way to meet increasing food demand. The document covers topics such as milk and dairy product quality, nutritional value, and potential for repurposing by-products to reduce environmental pollution. It also includes studies on different types of milk, such as camel milk, mare milk, yak milk, goat milk, and sheep milk. The document serves as a valuable resource for sustainability, generating new research ideas, and developing novel dairy products. The authors express their gratitude to the research teams and acknowledge funding support for this work. [Extracted from the article]

This study aims to improve press equipment for safflower oil production by using a mechanism that optimizes pressure distribution within screw turns. A detailed analysis of the main components of the produced safflower oil was performed, encompassing both quantitative and qualitative assessments. Through the exploration of dependencies governing the safflower oil pressing process on the screw press, the optimal parameters were determined. As a result of the research, the optimal diaphragm gap between the gape cylinder and the pressing screw was determined, with the optimal oil yield percentage achieved at ω = 6.2 rad/s and δ = 5 mm. The study also compared the performance of the existing Dream Modern ODM-01 screw press and its upgraded version by analyzing the extracted oil. The results reveal changes in the quantitative and qualitative composition of the main oil components following the operation of the existing and the modernized screw presses. For instance, the amount of unsaturated fatty acids, such as oleic acid (7.7 ± 0.566%), linoleic acid (85.3 ± 1.185%), and linolenic acid (1.2 ± 0.223%), increased. There was an increase in the presence of inorganic substances in safflower oil: iron (0.023 ± 0.031 mg/kg), phosphorus (0.086 ± 0.059 mg/kg), silicium (0.136 ± 0.075 mg/kg), and others. The findings of this study hold significant commercial value and offer promising prospects for global market implementation. [ABSTRACT FROM AUTHOR]

This document discusses the importance of improving the quality of meat and meat products from rare pork breeds and genetic types. The production of pork has traditionally focused on lean genotypes, but there is growing interest in exploring different breeds and genetic types to produce niche pork products with added value. The document highlights various studies that have been conducted on carcass and meat quality, nutrition and the effects of different ingredient supplements, and genetics. These studies provide valuable insights into enhancing the quality of meat and meat products from non-standard pork breeds. [Extracted from the article]

The problematic cohesiveness of food powders can commonly be solved using pulsed fluidized-bed agglomeration. However, progressively larger granules may result in unstable fluidization. The aims of this research study were to investigate fluid bed expansion as affected by particle enlargement and to control its stability using an image-processing technique. Instant riceberry powder (IRP) was agglomerated using varied air pulsation frequencies (1, 2.5, and 4 Hz). Bed expansion captured by image processing revealed that expanded bed height decreased with agglomeration time. The results showed an enlargement of agglomerated IRP, expressed in D10, D50, and D90, with narrower distribution presented by span, and an improvement in bulk and reconstitution properties. The reduced Carr index (22–27%) and Hausner ratio (1.28–1.38) presented fair flowability and intermediate cohesiveness, respectively. Additionally, airflow during agglomerate growth was progressively adjusted using the image-processing method to enhance bed hydrodynamic stability, leading to improved process efficiency and product quality. This proposed approach has potential applications in the food powder manufacturing industry, particularly by enhancing the fluidization of cohesive particles with cracks and channels. [ABSTRACT FROM AUTHOR]

Cassava tuber is an essential staple crop in tropical regions with versatile applications in the food, feed, and industrial sectors. However, its high moisture content and perishable nature necessitate efficient preservation methods to extend its shelf life and enhance its value. Pre-drying, drying, and post-drying processes play pivotal roles in maintaining the quality and usability of cassava products. This review comprehensively examines the current status and future directions in the pre-drying, drying, and post-drying processes of cassava tuber. Various pre-drying or pretreatment methods and drying techniques are evaluated for their impacts on drying kinetics and product quality. Additionally, challenges and limitations in achieving high-quality processing of cassava flour are identified. Future directions in cassava drying methods emphasize the integration of combined pre-drying and drying techniques to optimize resource utilization and processing efficiency. Furthermore, the adoption of advanced online measurement and control technologies in drying equipment is highlighted for real-time monitoring and optimization of drying parameters. The importance of optimizing existing processes to establish a comprehensive cassava industrial chain and foster the development of the cassava deep-processing industry is emphasized. This review provides valuable insights into the current trends and future prospects in cassava drying technologies, aiming to facilitate sustainable and efficient utilization of cassava resources for various applications. [ABSTRACT FROM AUTHOR]

Anthocyanin-based smart packaging has been widely used for food freshness monitoring, but it cannot meet the requirements of smart films with antibacterial properties. This study aimed to enhance the antibacterial properties of intelligent films by incorporating Amomum tsao-ko essential oil (AEO) for mantis shrimp spoilage tracking and keeping the product fresh. A smart film was designed by introducing AEO and purple potato anthocyanin (PPA) to a polyvinyl alcohol/cellulose nanocrystal (PVA/CNC) polymer matrix. Our findings revealed that APP and AEO imparted the smart film with a favorable oxygen barrier, UV protection, mechanical properties, and antioxidant and pH/NH3-sensitive functions. Interestingly, the PVA/CNC-AEO-PPA film achieved 45.41% and 48.25% bactericidal efficacy against S. putrefaciens and V. parahaemolyticus, respectively. Furthermore, a visual observation confirmed that the target film (PVA/CNC-AEO-PPA) changed color significantly during mantis shrimp spoilage: rose red—light red—pink—light gray—dark gray. Meanwhile, the PVA/CNC-AEO-PPA film retarded the quality deterioration of the mantis shrimp effectively. The PVA/CNC-AEO-PPA film shows great application potential in mantis shrimp preservation and freshness monitoring; it is expected to become a rapid sensor for detecting seafood quality non-destructively and a multifunctional film for better preservation of product quality. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the effect of extended maturation and temperature increase on the physico-chemical, biochemical, instrumental color and texture, sensory, and acceptability parameters of cured and boneless Iberian hams. Given the limited knowledge in this area, our objective was to develop a ham with enhanced proteolysis, potentially leading to increased bioactive peptide generation and superior sensory characteristics compared to salt-reduced counterparts. To achieve this, a batch of hams cured up to 38% loss at 30 °C and two batches cured up to 42% loss at 30 °C and 36 °C were evaluated. Results showed that the increase in processing time and temperature significantly enhanced (p < 0.05) ham proteolysis and amino acid content without adversely affecting its texture. No significant differences were observed in instrumental texture parameters or sensory attributes as evaluated by consumers. These processing conditions also increased the content of free amino acids, improving the product quality. Overall, these processing modifications resulted in hams with excellent sensory acceptability and enhanced bioactive potential despite the salt reduction. [ABSTRACT FROM AUTHOR]

Understanding the correlation between straightforward analytical methods and sensory attributes is pivotal for transitioning to sustainable packaging while improving product quality. In this context, the viability of eco-sustainable packaging alternatives for single-packaged croissants has been investigated through examining the correlations between analytical methods, sensory attributes, employing quantitative descriptive analysis (QDA), and consumer survival analysis. The performance of biaxially oriented polypropylene (BOPP), a petrochemical plastic film, against paper-based, compostable, and biodegradable films over a 150-day croissant storage period was compared in this study, examining both physiochemical and sensory perspectives. The results showed a correlation between a lower water vapour barrier in packaging materials and increased moisture migration and croissant hardness, as assessed by the Avrami kinetic model. Notably, given its reduced barrier properties, the compostable film accelerated sensory profile deterioration, as evidenced by QDA results. Shelf-life estimation, assessed by consumer rejection, underscored the viability of the biodegradable film for up to 185 days, surpassing BOPP, paper-based, and other biodegradable alternatives. Using linear regression, physiochemical parameters associated with predicted shelf-life were elucidated. Overall, croissants were rejected by 50% of consumers when they reached humidity levels below 18%, water activity below 0.81, firmness exceeding 1064 N, pH above 4.4, and acidity below 4.5. Based on the results of this study, biodegradable packaging emerges as a promising alternative to traditional BOPP, offering a sustainable opportunity to extend the shelf-life of croissants. [ABSTRACT FROM AUTHOR]

Drying is an important preservation method of casein. Traditional natural draining and drying processes have low efficiency, long processing time, and poor product quality, which urgently need to be improved. This study investigated the effects of pre-dehydration intensities (30 N 30 min (PreD1) and 50 N 30 min (PreD2)) and drying methods (including pulsed vacuum drying (PVD), infrared drying (IRD), and hot air drying (HAD)) on the drying kinetics, drying modeling, and quality of yak milk casein. These findings reveal that PreD2 and PVD both had a positive impact on shortening the drying time. Compared to other combined treatments, PreD2-PVD had the shortest drying time of 6 h. The Midilli–Kucuk mathematical model effectively predicted the drying of casein. The yak milk casein powder treated with PreD2-PVD possessed a higher content of gross compositions, superior color, lower levels of fat oxidation and 5-hydroxymethylfurfural (5-HMF), and higher emulsifying activity index (EAI) and emulsion stability index (ESI) values. Overall, combining pre-dehydration with PVD proved effective in improving the drying rate and maintaining a good quality of yak milk casein, showing promising potential for industrial applications. [ABSTRACT FROM AUTHOR]

Cured meat products constitute one of the meat categories commonly consumed in Ireland and has been part of the Irish cuisine and diet for many years. Ham, gammon, and bacon are some of the products that involve curing as part of the traditional processing methods. Common among these products are high levels of salt and the addition of nitrites. These products undergo processing treatments to create variety, preserve shelf-life, and develop their unique quality and safety characteristics. However, consumers are becoming more conscious of the level of processing involved in these products, and the effects of some components and ingredients might be perceived as unhealthy. Meat product developers have been exploring ways to reduce the amount of ingredients such as salt, saturated fat, and chemical preservatives (e.g., nitrites), which are linked to health concerns. This is a challenging task as these ingredients play an important techno-functional role in the products' quality, safety, and identity. While innovative processing techniques are being introduced and progress has been made in reformulation and packaging technologies, much is still unknown, especially regarding the applicability of many of the proposed interventions to a wide range of meat products and their sustainability at the industrial scale. [ABSTRACT FROM AUTHOR]

Developing puff pastry (PP) laminating fats (LFs) with sustainable structured olive pomace oil (OPO) could contribute to its increased valorization. This study evaluated the physicochemical stability of four OPO-based LFs or margarines and the performance of their baked PP counterparts during two months of chilling storage at 4 °C. LF samples, developed at the laboratory scale, contained 41% (LF1 and LF2) OPO and 31% (LF3 and LF4) OPO together with 10% cocoa butter when using two static initial crystallization conditions (room temperature for LF1 and LF3, freezer for LF2 and LF4) before storage. During the storage period, the proximate composition, thermal and dynamic rheological properties, firmness and spreadability, oil-binding capacity, color, and lipid oxidation of the four LF samples were examined, along with the baking performance and textural properties of the PP counterparts. The initial cooling rate had minimal significance. Cocoa butter negatively influenced post-crystallization processes occurring in OPO-based LF3 and LF4, resulting in increased hardness and reduced performance after 18 days of storage, attributed, at least partially, to a high amount of 1,3-dipalmitoyl-2-oleoyl-glycerol (POP), mainly from cocoa butter. Conversely, OPO-based LF1 and LF2 maintained their quality and were stable for two months without apparent granular crystal formation. [ABSTRACT FROM AUTHOR]

Accurate assessment of dough kneading is pivotal in pasta processing, where both under-kneading and over-kneading can detrimentally impact dough quality. This study proposes an innovative approach utilizing a cost-effective current sensor to ascertain the optimal kneading time for dough. Throughout the kneading process, the dough's tensile resistance gradually increases, reflecting the evolution of properties such as the gluten network. This leads to a discernible ascending phase in dough quality, evident through an increase in the load current of the mixing machine, succeeded by a subsequent decline beyond a certain threshold. The identification of this peak point enables the achievement of optimal dough consistency, thereby enhancing the overall quality of both the dough and subsequent pasta products. After the final product quality assessment, this novel method promises to be a valuable tool in optimizing pasta processing and ensuring consistent product quality. [ABSTRACT FROM AUTHOR]

Concerns regarding product quality and nutrition are raised due to the effects of high temperatures on frying fats. The aim of this research was to examine the effects of temperature and burdock extract addition in relation to quality parameters for dietary lard and goose fat exposed to heating. In order to monitor quality changes, animal fats and 0.01% additivated fats were heated at different temperatures (110, 130, 150, 170, 190, and 210 °C for 30 min). Thiobarbituric acid-reactive substances test (TBARS), peroxide value (PV), iodine value (IV), acid value (AV), saponification value (SV), total polar compounds (TPoC), total phenolic content (TPC), fatty acid (FA) content, and microscopic examination were established in order to quantify the level of oxidative rancidity. Heating temperature and additivation had a significant (p < 0.001) effect on peroxide value. In all fats, values of thiobarbituric acid-reactive substances significantly (p < 0.001) increased with heating temperature, but values decreased when burdock extract was added in a proportion of 0.01%. Positive correlations were found between AV and PV for lard (r = 0.98; p < 0.001) and goose fat (r = 0.96; p < 0.001). The heating temperature had a significant effect on total MUFAs in both lard and goose fat (mostly in non-additivated fat). Statistical analysis of the data showed that the addition of burdock extract at a concentration of 0.01% significantly (p < 0.01) reduced the installation of oxidation process in alimentary fats heated at different temperatures. Animal fats were well protected from oxidation by burdock extract, which demonstrated its efficacy as an antioxidant; it may be used to monitor the fats oxidation and to estimate their shelf-life stability. [ABSTRACT FROM AUTHOR]

In practical industrial-scale paddy drying production, manual empirical operation is still widely used for process control. This often leads to poor uniformity in the moisture content distribution of discharged grains, affecting product quality. Model Predictive Control (MPC) is considered the most effective control method for paddy drying, but its implementation in industrial-scale drying is hindered by its high computational cost. This study aims to address this challenge by proposing a deep-learning-based model predictive control (DL-MPC) strategy for paddy drying. By establishing a mapping relation between the inlet and outlet paddy moisture content and paddy flow velocity, a DL-MPC strategy suitable for multistage counter-flow paddy drying systems is proposed. DL-MPC systems are developed using long short-term memory (LSTM) neural networks and trained using datasets from single-drying-stage and multistage drying systems. Simulation and analysis are conducted, followed by verification experiments on a 5HNH-15 multistage counter-flow paddy dryer. The results show that the DL-MPC system significantly improves computational speed while achieving satisfactory control performance. The predicted paddy flow velocity exhibits a smooth variation and matches field data obtained from multiple transition points, confirming the effectiveness of the designed DL-MPC system. The mean absolute error between the predicted and actual paddy moisture content under the DL-MPC system is 0.190% d.b., further supporting the effectiveness of the control system. [ABSTRACT FROM AUTHOR]

To improve product quality and obtain suitable processing parameters for crab apple slices (CASs) produced by continuous microwave drying (CMD), the effects of processing parameters, including slice thickness, microwave power, air velocity, and conveyor belt speed, on the evaluation indexes in terms of temperature, moisture content, color (L*, a*, b*), hardness, brittleness, and total phenolic content of CASs were investigated via the response surface method. The results indicated that microwave power has the greatest effect on the evaluation indexes applied to the CASs under CMD, followed by air velocity, slice thickness, and conveyor belt speed. To produce the desired product quality, the appropriate parameters for CMD of CASs were optimized as 1.25 mm slice thickness, 14,630 W microwave power, 0.50 m·s−1 air velocity, and 0.33 m·min−1 conveyor belt speed. Following that, the moisture content under CMD was found to be 13.53%, the desired color, hardness 0.79 g, brittleness 12.97 (number of peaks), and the total phenolic content 5.48 mg·g−1. This research provides a theoretical framework for optimizing the processing parameters of CASs using the response surface method.

This study aims to improve press equipment for safflower oil production by using a mechanism that optimizes pressure distribution within screw turns. A detailed analysis of the main components of the produced safflower oil was performed, encompassing both quantitative and qualitative assessments. Through the exploration of dependencies governing the safflower oil pressing process on the screw press, the optimal parameters were determined. As a result of the research, the optimal diaphragm gap between the gape cylinder and the pressing screw was determined, with the optimal oil yield percentage achieved at ω = 6.2 rad/s and δ = 5 mm. The study also compared the performance of the existing Dream Modern ODM-01 screw press and its upgraded version by analyzing the extracted oil. The results reveal changes in the quantitative and qualitative composition of the main oil components following the operation of the existing and the modernized screw presses. For instance, the amount of unsaturated fatty acids, such as oleic acid (7.7 ± 0.566%), linoleic acid (85.3 ± 1.185%), and linolenic acid (1.2 ± 0.223%), increased. There was an increase in the presence of inorganic substances in safflower oil: iron (0.023 ± 0.031 mg/kg), phosphorus (0.086 ± 0.059 mg/kg), silicium (0.136 ± 0.075 mg/kg), and others. The findings of this study hold significant commercial value and offer promising prospects for global market implementation.

Freeze-drying is an excellent method for dehydration due to its benefits, including increased shelf-life, unique texture, and, in particular, good nutritive quality. However, the applicability of traditional freeze-drying systems in the food industry is still challenging owing to their prolonged drying duration, extraordinary energy usage, and high process cost. Therefore, the need to upgrade or develop conventional freeze-dryers for common or sophisticated food structures is ever-increasing. Enhancements to the freeze-drying process can significantly speed up drying and reduce energy consumption while maintaining phytochemicals, physical quality, and sensory attributes in final products. To overcome the downsides of conventional freeze-drying, hybrid freeze-drying methods were introduced with a great potential to provide food products at shorter drying durations, lower costs, and environmental friendliness while resulting in the same nutritive and sensory qualities as that of conventional freeze-drying in special circumstances. An overview of the most current improvements, adaptations, and applications of hybrid freeze-drying in food dehydration is given here. In this review, comparative studies are offered to characterize the drying process from the standpoint of chemical quality and sensory attributes. All the reviewed studies confirmed that the nutritional and sensory qualities of the end product can be retained using hybrid freeze-drying almost to the same extent as using single freeze-drying. It was also inferred that hybrid freeze-drying can surpass conventional freeze-drying and allow for obtaining dried products with characteristics typical of raw material if operating parameters are optimized based on product quality and energy usage. [ABSTRACT FROM AUTHOR]

Extra virgin olive oil (EVOO) and avocado oil (AVO) are recognized for their unique sensory characteristics and bioactive compounds. Declared blends with other vegetable oils are legal, but undeclared mixing is a common type of fraud that can affect product quality and commercialization. In this sense, this study explored strategies to mitigate the influence of lighting in order to make digital image colorimetry (DIC) using a smartphone more robust and reliable for predicting the soybean oil content in EVOO and AVO blends. Calibration models were obtained by multiple linear regression using the images' RGB values. Corrections based on illuminance and white reference were evaluated to mitigate the lightness effect and improve the method's robustness and generalization capability. Lastly, the prediction of the built model from data obtained using a distinct smartphone was assessed. The results showed models with good predictive capacities, R2 > 0.9. Generally, models solely based on GB values showed better predictive performances. The illuminance corrections and blank subtraction improved the predictions of EVOO and AVO samples, respectively, for image acquisition from distinct smartphones and lighting conditions as evaluated by external validation. It was concluded that adequate data preprocessing enables DIC using a smartphone to be a reliable method for analyzing oil blends, minimizing the effects of variability in lighting and imaging conditions and making it a potential technique for oil quality assurance. [ABSTRACT FROM AUTHOR]

This article discusses the importance of evaluating the quality of bee products, such as honey, bee pollen, and royal jelly, to protect human health. The article highlights various studies that have examined the physicochemical characteristics of honey, identified methods for detecting adulterants in honey, and explored techniques for authenticating honey. It also discusses the nutritional significance of bee pollen and the potential for it to trigger food-related allergies. Additionally, the article addresses the presence of pesticides in bee products and the need for pesticide residue detection and risk assessment. The authors invite readers to provide feedback and suggestions on the content. [Extracted from the article]

The aim of this paper is to improve the nutritional quality of bakery products by replacing wheat flour (WF) with different proportions (10%, 20%, and 30%) of baobab flour (BF). The composite flours and bread obtained were evaluated from nutritional, physical-chemical, phytochemical, organoleptic, and rheological points of view. The results obtained show that BF is a rich source of minerals (K: 13,276.47 ± 174 mg/kg; Ca: 1570.67 ± 29.67 mg/kg; Mg: 1066.73 ± 9.97 mg/kg; Fe: 155.14 ± 2.95 mg/kg; Na: 143.19 ± 5.22 mg/kg; and Zn: 14.90 ± 0.01 mg/kg), lipids (1.56 ± 0.02 mg/100 g), and carbohydrates (76.34 ± 0. 06 mg/100 g) as well as for the phytochemical profile. In this regard, the maximum contents for the total polyphenols content (TPC) were recorded in the case of bread with 30% BF (297.63 ± 1.75 mg GAE/100 g), a total flavonoids content (TFC) of 208.06 ± 0.002 mg QE/100 g, and 66.72 ± 0.07% for antioxidant activity (AA). Regarding the physical-chemical, rheological, and organoleptic analysis, the bread sample with 10% BF (BWB1) was the best among the samples with different proportions of BF. It presented a smooth, porous appearance (73.50 ± 0.67% porosity) and an elastic core (85 ± 0.27% elasticity) with a volume of 155.04 ± 0.95 cm3/100 g. It had better water absorption (76.7%) than WF (55.8%), a stability of 5.82 min, and a zero-gluten index. The scores obtained by BWB1 for the organoleptic test were as follows: Appearance: 4.81; color: 4.85; texture: 4.78; taste: 4.56; flavor: 4.37; and overall acceptability: 4.7. This study shows that BF improved the nutritional quality of the product, organoleptic properties, α-amylase activity, viscosity, and phytochemical profile, resulting in composite flour suitable for the production of functional bread. [ABSTRACT FROM AUTHOR]

Consumers are more aware and demanding of healthy food options, besides being concerned with environment-friendly consumption. This paper aims to evaluate nutritional, technological, and sensory characteristics of legumes and their products' quality and versatility, considering potential applications in new food options. Legumes are foods that have a recognized nutritional group since they have high protein and fiber content. However, their consumption is still somehow limited for some reasons: in some countries it is not easy to find all the species or cultivars, they need an organization and planning before preparation since they need soaking, and there is the presence of antinutritional factors. Due to the different functionalities of legume proteins, they can be applied to a variety of foods and for different purposes, as grains themselves, aquafaba, extracts, flours, brans, and textured proteins and sprouts. These products have been inserted as ingredients in infant food formulations, gluten-free foods, vegetarian diets, and in hybrid products to reduce food costs as well. Foods such as bread, cakes, cookies, meat analogues, and other baked or cooked products have been elaborated with nutritional, technological and sensory quality. Further development of formulations focused on improving the quality of legume-based products is necessary because of their potential and protein quality. [ABSTRACT FROM AUTHOR]

Fermented foods, which have emerged fortuitously over the course of human development, have become an essential part of human history worldwide. Third, researchers have explored the application of microorganisms in various stages of fermented food production, for example, in pre-treatment, fermentation, and post-fermentation processes. On the other hand, after 28 days of solid-state fermentation, the same actinomycete strains produced a total of 64 terpenoids using the five fermentation substrates, and the cumulative terpenoid content was determined to be 23,651.52 g/kg in the fermentation products. Despite the popularity of fermented foods globally, many traditional fermented foods are still produced using open fermentation methods where it is difficult to evaluate the safety or function of microorganisms, leading to inevitable challenges. [Extracted from the article]

In order to develop low-salt and healthy surimi products, we limited the amount of NaCl to 0.5 g/100 g in this work and studied the effect of CaCl2 (0, 0.5, 1.0, 1.5, and 2.0 g/100 g) on the 3D printing quality of low-salt surimi gel. The results of rheology and the 3D printing showed that the surimi gel with 1.5 g/100 g of CaCl2 added could squeeze smoothly from the nozzle and had good self-support and stability. The results of the chemical structure, chemical interaction, water distribution, and microstructure showed that adding 1.5 g/100 g of CaCl2 could enhance the water-holding capacity and mechanical strength (the gel strength, hardness, springiness, etc.) by forming an orderly and uniform three-dimensional network structure, which limited the mobility of the water and promoted the formation of hydrogen bonds. In this study, we successfully replaced part of the salt in surimi with CaCl2 and obtained a low-salt 3D product with good printing performance and sensory properties, which could provide theoretical support for the development of healthy and nutritious surimi products. [ABSTRACT FROM AUTHOR]

In this review article, we focus on the effects of insect pests on the quality of stored cereals and legume grains. The changes in the amino-acid content, the quality of proteins, carbohydrates, and lipids, and the technological characteristics of the raw materials when infested by specific insects are presented. The differences reported concerning the rate and kind of infestation effects are related to the trophic habits of the infesting insect species, the variation of the component distribution in the different species of grains, and the length of the storage period. For example, wheat germ and brans feeders such as Trogoderma granarium may cause a higher reduction in proteins than endosperm feeders such as Rhyzopertha dominica, since the germ and brans contain higher concentrations of proteins. Trogoderma granarium may also cause higher reduction in lipids than R. dominica in wheat, maize and sorghum, in which most of the lipids exist in the germ. Furthermore, infestation with insects such as Tribolium castaneum may downgrade the overall quality of wheat flour, by increasing the moisture content, the number of insect fragments, the color change, the concentration of uric acid, the microbial growth, and the prevalence of aflatoxins. Whenever possible, the significance of the insect infestation and the concomitant compositional alterations on human health are presented. It should be highlighted that understanding the impact of insect infestation on stored agricultural products and the quality of food will be crucial for the required food security in the future. [ABSTRACT FROM AUTHOR]

The production of cooked ham has been gaining popularity in recent years in Spain. In general, the production process carried out by the companies remains traditional, and different production methods are therefore being sought to innovate and improve the quality of the product. This is either through pig crossbreeding, varying additives and ingredients, improving some stages of the production process, or providing nutritional and health claims that are useful to guiding the purchasing decision of consumers. Obviously, this series of changes must be subject to Spanish and European regulations in order to be marketed inside and outside the country. [ABSTRACT FROM AUTHOR]

Quality testing in the food industry is usually performed by manual sampling and at/off-line laboratory analysis, which is labor intensive, time consuming, and may suffer from sampling bias. For many quality attributes such as fat, water and protein, in-line near-infrared spectroscopy (NIRS) is a viable alternative to grab sampling. The aim of this paper is to document some of the benefits of in-line measurements at the industrial scale, including higher precision of batch estimates and improved process understanding. Specifically, we show how the decomposition of continuous measurements in the frequency domain, using power spectral density (PSD), may give a useful view of the process and serve as a diagnostic tool. The results are based on a case regarding the large-scale production of Gouda-type cheese, where in-line NIRS was implemented to replace traditional laboratory measurements. In conclusion, the PSD of in-line NIR predictions revealed unknown sources of variation in the process that could not have been discovered using grab sampling. PSD also gave the dairy more reliable data on key quality attributes, and laid the foundation for future improvements. [ABSTRACT FROM AUTHOR]

The dairy field has considerable economic relevance in the agri-food system, but also has the need to develop new 'green' supply chain actions to ensure that sustainable products are in line with consumer requirements. In recent years, the dairy farming industry has generally improved in terms of equipment and product performance, but innovation must be linked to traditional product specifications. During cheese ripening, the storage areas and the direct contact of the cheese with the wood must be carefully managed because the proliferation of contaminating microorganisms, parasites, and insects increases significantly and product quality quickly declines, notably from a sensory level. The use of ozone (as gas or as ozonated water) can be effective for sanitizing air, water, and surfaces in contact with food, and its use can also be extended to the treatment of waste and process water. Ozone is easily generated and is eco-sustainable as it tends to disappear in a short time, leaving no residues of ozone. However, its oxidation potential can lead to the peroxidation of cheese polyunsaturated fatty acids. In this review we intend to investigate the use of ozone in the dairy sector, selecting the studies that have been most relevant over the last years. [ABSTRACT FROM AUTHOR]

Spontaneous fermentations that do not rely on backslopping or industrial starter cultures were especially important to the early development of society and are still practiced around the world today. While current literature on spontaneous fermentations is observational and descriptive, it is important to understand the underlying mechanism of microbial community assembly and how this correlates with changes observed in microbial succession, composition, interaction, and metabolite production. Spontaneous food and beverage fermentations are home to autochthonous bacteria and fungi that are naturally inoculated from raw materials, environment, and equipment. This review discusses the factors that play an important role in microbial community assembly, particularly focusing on commonly reported yeasts and bacteria isolated from spontaneously fermenting food and beverages, and how this affects the fermentation dynamics. A wide range of studies have been conducted in spontaneously fermented foods that highlight some of the mechanisms that are involved in microbial interactions, niche adaptation, and lifestyle of these microorganisms. Moreover, we will also highlight how controlled culture experiments provide greater insight into understanding microbial interactions, a modest attempt in decoding the complexity of spontaneous fermentations. Further research using specific in vitro microbial models to understand the role of core microbiota are needed to fill the knowledge gap that currently exists in understanding how the phenotypic and genotypic expression of these microorganisms aid in their successful adaptation and shape fermentation outcomes. Furthermore, there is still a vast opportunity to understand strain level implications on community assembly. Translating these findings will also help in improving other fermentation systems to help gain more control over the fermentation process and maintain consistent and superior product quality. [ABSTRACT FROM AUTHOR]

The characterization of quality brand meat products, such as "Chorizo Zamorano" dry fermented sausages, involves a wide range of data which makes it necessary to use alternative statistical methodologies. In this study, the feasibility of the Categorical Principal Components Analysis as a multivariate non-linear technique for the characterization of "Chorizo Zamorano" was assessed. The data analyzed were those of eight commercial brands covered by the quality mark over an eight-year period (2013–2020) and included parameters of the physicochemical composition and organoleptic properties of the product. The results showed that "Chorizo Zamorano" has an average moisture content (28.28%), high protein (38.38%) and fat (51.05%) contents, and a very low carbohydrate concentration (1.52%). Results showed that the fat and protein content and the sensory parameters related to external and internal odor appeared to be the studied variables with the greatest influence on the classification of the products according to their quality. [ABSTRACT FROM AUTHOR]

To improve the safety of consuming bee products, more allergens from bee products like honey, bee pollen, royal jelly, and bee larvae need further exploration. Due to the presence of plant pollen and bee gland proteins in some bee products, allergens may be present, making it easy to cause allergic reactions [[12]]. Traceability and Authenticity Identification of Bee Products There are counterfeit products present in the bee product market, which may lack compliant production processes and raise concerns about their quality. [Extracted from the article]

Technological prospecting was performed on documents related to sourdough microbiota using SCOPUS, Web of Science, Google Scholar, Espacenet and Patent Inspiration databases. Scientific articles and patents were analyzed based on three different perspectives: macro (year of publication, country, and institutions), meso (categorization as different taxonomies according to the subject evaluated), and micro (in-depth analysis of the main taxonomies, gathering the documents in subcategories). The main subject addressed in patents was the starter and product preparation, while 58.8% of the scientific publications focused on sourdough starter microbiota (identification and selection of microorganisms). Most patents were granted to companies (45.9%), followed by independent inventors (26.4%) and universities (21.8%). Sourdough products are in the spotlight when the subject is the bakery market; however, a closer integration between academia and industry is needed. Such a collaboration could generate a positive impact on the sourdough market in terms of innovation, providing a bread with a better nutritional and sensory quality for all consumers. Moreover, sourdough creates a new magnitude of flavor and texture in gastronomy, providing new functional products or increasing the quality of traditional ones. [ABSTRACT FROM AUTHOR]

Organic food quality is based on processing. While the EU organic production regulation focuses on agricultural production, private standards provide more detailed information about further processing. For the development of organic processing, practitioner perspectives can provide valuable input. To get insight into practitioner perspectives, we conducted semi-structured expert interviews with nine employees of seven partly organic juice processing companies from Germany and Austria. Interview topics were (i) quality of organic juice processing in general, (ii) assessment of specific processing techniques, (iii) product quality of organic juice and (iv) flow of information between producer and consumer. We conducted a thematic analysis. We found that the experts' understanding of process quality mostly includes more aspects than the EU organic production regulation. It covers the whole food chain plus aspects of social and environmental sustainability. The experts prefer directly bottled juice of local raw materials but chiefly accept juice made from concentrate of exotic raw materials because of environmental concerns. Organic juice is preferred when it is cloudy and natural fluctuations are interpreted as an indicator of natural quality. The experts report that consumer information is challenging because of low food literacy. Raising this might help reduce the number of processed juices on the market. [ABSTRACT FROM AUTHOR]

This research was performed on marketed table olives. We investigated possible correlations among textural parameters obtained using both sensory assessment and instrumental textural analysis. The purpose of this research study was to find out any possible correlation between the two different analysis methods, especially in relation to acoustic compression. Up to now, there are no available studies on this topic. Samples from different olive cultivars and different processing methods were analysed, and a data matrix resulting from four textural/acoustic and six sensorial kinaesthetic parameters was processed. The two parameters "S_crunch" and "T_noise" (the "S" letter is for "sensorial", and the "T" letter is for "textural") showed complementarity, but they did not discriminate properly. The textural values of "T_flesh_h" and the sensory values of "S_flesh_h" were directly correlated to "S_crunch", and as an unexpected result, the textural values of "T_skin_bs" and the sensory values of "S_skin_h" were closely linked to each other. Regarding the analysed parameters, the results showed that the two techniques are clearly complementary and could constitute a valid tool for varietal characterization and for determining the instrumental and organoleptic qualities of the product; it was not possible to proceed with the characterization by type of processing method, as the dataset was not large enough. [ABSTRACT FROM AUTHOR]

The market for green agricultural products has tremendous growth potential as the pressure on resources and the environment increases and the safety of agricultural products is garnering attention. The demand for green food (tea) is also rising as tea is among the top three beverages consumed worldwide. The study attempts to propose a model of the relationship between green food (tea) customers' product knowledge, perceived product quality, trust, purchase intention, and purchase behaviour. In addition, we will provide an analysis of the role played by age, education, income, gender, etc. The study included 700 questionnaires on green food (tea) consumers that were collected through the Credemo questionnaire platform, and data analysis was carried out using the SmartPLS software to assess the model of product knowledge on green food (tea) consumption behaviour. The findings demonstrate that, concerning differences in age, education, income, and gender; product knowledge—including attribute knowledge and green knowledge—has a positive impact on perceived product quality and trust; perceived product quality has a positive impact on trust; perceived product quality and trust have a positive impact on purchase intention; and purchase intention has a positive impact on purchase behavior. [ABSTRACT FROM AUTHOR]

The aim of the study was to determine the influence of enriching liver sausages with different levels of walnut paste on the quality properties of this product. Sausages were produced with 5, 10, 15, 20, and 25% amount additions of walnut paste and without the addition of nuts (control product). It was found that walnut paste, especially when introduced at an amount >15%, was a component that limited thermal losses and significantly modified the characteristics of liver sausages. The addition of walnut paste also increased the fat content of liver sausages by two–three times, which was one of the factors that weakened their structure, including lowering their compression, shear, and penetration force but increasing their spreadability. Moreover, the addition of walnut paste at an amount of ≥20% resulted in the products having a slightly different color, with lower values for the a* color parameter. Such changes were assessed as a favorable modification to the product, increasing its overall desirability, especially with the addition of walnut paste at the level of 20%. Walnut paste can therefore be a valuable ingredient that allows for the development of a health-promoting product with improved quality features. However, with the addition of a walnut paste at an amount of 25%, it is necessary to take into account the more rapid and unfavorable fat changes that occur during the storage of the liver sausages, as indicated by about 50% higher TBARS values (compared to the control product). [ABSTRACT FROM AUTHOR]

Oxidation is one of the most common causes of the deterioration of meat and meat products. At the same time, synthetic antioxidants are becoming less accepted by consumers due to the potential health hazards they might cause. Therefore, a new trend to substitute these synthetic antioxidants with natural antioxidants has emerged. This study adds flavonoid extracts from Cyclocarya paliurus (C. paliurus) as a natural antioxidant for meat products (Frankfurters). The results showed that flavonoid extracts from C. paliurus had strong antioxidant and antibacterial activity. This is proportional to concentration, and the addition of extracts could significantly (p < 0.05) delay the lipid oxidation in the samples. In addition, we did not observe hazardous effects on the samples' pH and texture as a result of adding flavonoid extracts. We observed that flavonoid extracts from C. paliurus at concentrations of 0.06% and 0.12% did not affect the color and sensory evaluation of the samples. At a concentration of 0.18% and 0.24%, the flavonoid extracts had a negative impact on the color and sensory evaluation of the samples, likely due to the yellow-brown color of the extract itself. The findings showed that a low concentration of 0.12% flavonoid extracts from C. paliurus in meat products could effectively prevent lipid oxidation without affecting the sensory quality. [ABSTRACT FROM AUTHOR]

To understand the effect of gluten on starch digestion characteristics, the structural characteristics of protein, starch, and starch digestion attributes were explored by using flours of four wheat near-isogenic lines. Protein and starch fractions from the four flours were used to form so-called recombinant flours where glutenin and gliadin protein fractions, in different ratios, were combined with starch and heated in a water slurry at 80 °C for 5 min. We found that starch digestibility of the recombinant flours could be reproducibly modified by altering the long- and short-range molecular order of starch through varying the attributes of the gluten protein by virtue of the gluten strength as well as the proportions of glutenin and gliadins. The gluten composition changes of strong-gluten flour did not improve the starch digestion resistibility, however, for the moderate- and weak-gluten flours, the proportional increase of glutenin improved the resistance of starch to digestion through the increased long- and short-range molecular order of starch. The resistance of starch to digestion could also be enhanced with increasing gliadin, and was associated with the modified short-range molecular order of starch. We propose that flour mixtures can be optimized for specified product quality by manipulating the amounts of both gliadin and glutenin. [ABSTRACT FROM AUTHOR]

We evaluated the effects of ultrasound (US) and ultrasound combined with nisin (NUS) treatments on the properties of chestnut lily beverages (CLB) using conventional thermal pasteurisation (TP) as a control. After CLB samples were treated with US and NUS for 20, 40, or 60 min, the polyphenol oxidase activity (PPO), microbial inactivation effect, colour, pH value, total phenolic content, and antioxidant capacity of the CLB were observed. It was found that the inactivation rate of PPO in CLB after NUS treatment was higher than that in the US, indicating that NUS treatment aggravated PPO inactivation. Treatment time was important in the inactivation of microorganisms by US and NUS; NUS had a lethal synergistic lethal effect on microorganisms in CLB and when compared with US, NUS reduced changes in the CLB colour value. Notably, the total phenolic content and antioxidant capacity of the US- and NUS-treated CLB significantly increased relative to the TP group. These results that suggest NUS has a potential application value in the development of CLB because it reduces the risk of microorganism contamination and helps improve the quality of CLB. This study provides technical support and a theoretical basis for the improved production of CLB. [ABSTRACT FROM AUTHOR]

Competitive agri-food supply chain (hereafter, AFSC) is an important component of AFSC. In a competitive environment, more and more AFSCs use blockchain-based traceability services (hereafter, BBTS) to improve the traceability level of agricultural products. The investment rules concerning BBTS and the coordination rules in an AFSC are vital issues for many firms who want to adopt BBTS. To explore these laws, we constructed two competitive AFSCs, each of which included a supplier and a retailer. Considering the new changes in consumers' perception of product quality and safety after using the BBTS, the demand function was modified. Then we built the income functions of chain members under three situations of investment. The research found that: (1) the improvement of customers' perceived quality by using the BBTS can increase their benefits; (2) when decision-makers want to invest in the BBTS, they should pay attention to consumers' perceived quality safety factor for their competitive products; (3) when the investment cost is greater than its threshold value, two competitive AFSCs should invest in the BBTS together. [ABSTRACT FROM AUTHOR]

Salt is widely employed in different foods, especially in meat products, due to its very diverse and extended functionality. However, the high intake of sodium chloride in human diet has been under consideration for the last years, because it is related to serious health problems. The meat-processing industry and research institutions are evaluating different strategies to overcome the elevated salt concentrations in products without a quality reduction. Several properties could be directly or indirectly affected by a sodium chloride decrease. Among them, microbial stability could be shifted towards pathogen growth, posing a serious public health threat. Nonetheless, the majority of the literature available focuses attention on the sensorial and technological challenges that salt reduction implies. Thereafter, the need to discuss the consequences for shelf-life and microbial safety should be considered. Hence, this review aims to merge all the available knowledge regarding salt reduction in meat products, providing an assessment on how to obtain low salt products that are sensorily accepted by the consumer, technologically feasible from the perspective of the industry, and, in particular, safe with respect to microbial stability. [ABSTRACT FROM AUTHOR]

In order to develop low-salt and healthy surimi products, we limited the amount of NaCl to 0.5 g/100 g in this work and studied the effect of CaCl2 (0, 0.5, 1.0, 1.5, and 2.0 g/100 g) on the 3D printing quality of low-salt surimi gel. The results of rheology and the 3D printing showed that the surimi gel with 1.5 g/100 g of CaCl2 added could squeeze smoothly from the nozzle and had good self-support and stability. The results of the chemical structure, chemical interaction, water distribution, and microstructure showed that adding 1.5 g/100 g of CaCl2 could enhance the water-holding capacity and mechanical strength (the gel strength, hardness, springiness, etc.) by forming an orderly and uniform three-dimensional network structure, which limited the mobility of the water and promoted the formation of hydrogen bonds. In this study, we successfully replaced part of the salt in surimi with CaCl2 and obtained a low-salt 3D product with good printing performance and sensory properties, which could provide theoretical support for the development of healthy and nutritious surimi products.

The present study investigated the mathematical modeling foam-mat drying kinetics of cumbeba pulp and the effect of drying conditions on the color and contents of ascorbic acid, flavonoids, and phenolic compounds of the powder pulps obtained. Foam-mat drying was carried out in a forced air circulation oven at temperatures of 50, 60, and 70 °C, testing foam-mat thicknesses of 0.5, 1.0, and 1.5 cm. The increase in the water removal rate is a result of the increase in air temperature and the decrease in the thickness of the foam layer. Among the empirical and semi-empirical mathematical models, the Midilli model was the one that best represented the drying curves in all conditions evaluated. Effective water diffusivity ranged from 1.037 × 10−9 to 6.103 × 10−9 m2 s−1, with activation energy of 25.212, 33.397, and 36.609 kJ mol−1 for foam thicknesses of 0.5, 1.0, and 1.5 cm, respectively. Cumbeba powders showed light orangish colors and, as the drying temperature increased from 50 to 70 °C, for all thicknesses, the lightness value (L*) decreased and the values of redness (+a*) and yellowness (+b*) increased. Foam-mat drying at higher temperatures (60 and 70 °C) improved the retention of ascorbic acid and flavonoids, but reduced the content of phenolic compounds, while the increase in thickness, especially for flavonoids and phenolic compounds, caused reduction in their contents. The foam-mat drying method allowed obtaining a good-quality cumbeba pulp powder. [ABSTRACT FROM AUTHOR]

A high volume of water is needed to produce black ripe olives, which also entails a significant volume of wastewater with a high organic and inorganic contaminant charge. To reduce this problem, the reuse of KOH solutions (lyes) in a new process was studied. Once the lyes were removed from the tanks, KOH was then added for a new darkening process. Reusing the lyes up to four times gave rise to a product with similar physico–chemical and organoleptic characteristics as obtained with fresh solutions. The application of this process reduced coadjutant consumption by 32% and water by 20%, while global wastewater presented a high K content whose concentration could be valorized as a fertilizer by replacing commercial potassium nitrate. [ABSTRACT FROM AUTHOR]