Search

The utilization of food industry by-products represents a significant opportunity for developing functional foods. This study investigated the incorporation of Cucurbita maxima Plomo peel powder (PS) into wheat bread formulations to assess its potential as a valuable ingredient for bread-making. PS was incorporated into wheat flour at 1%, 10%, and 20% levels. The dough's rheological properties were analyzed using Mixolab. Bread samples were evaluated for physical characteristics (volume, texture, colour), antioxidant properties (DPPH, ABTS, FRAP), and reducing sugar content. Analyses were performed on day 0 and after 7 days of storage. PS incorporation significantly modified dough rheology, with increased development time and enhanced protein stability. Bread volume decreased progressively with PS addition (from 195.5 cm3 to 109.8 cm3 at 20% PS). However, antioxidant activity increased substantially, particularly in the crust, with ABTS values rising from 2.37 to 10.08 TE μM/g DM in water extracts. Total phenolic content and reducing sugars showed significant increases across all PS concentrations. Storage studies revealed stable antioxidant properties but progressive textural changes, with hardness increasing from 6.83 N to 108.8 N at 20% PS after 7 days. While PS incorporation affects bread's physical properties, the significant enhancement in antioxidant activity and phenolic content suggests its potential as a functional ingredient. The optimal incorporation level should balance technological properties with nutritional benefits. [ABSTRACT FROM AUTHOR]

Acrylamide formation in bread products poses health concerns, necessitating strategies to reduce its presence while maintaining nutritional value. This study investigated how different concentrations of pumpkin flour (Cucurbita maxima Plomo) and prolonged proofing times affect acrylamide content and bread characteristics. Composite bread samples were prepared with varying pumpkin flour shares (0–20%) to soft wheat flour using two proofing times (60 and 120 min). The study analyzed quality features, crust and crumb color, antioxidant activity, total polyphenolic content, reducing sugars, and acrylamide content of the resulting breads. Extended proofing (120 min) reduced acrylamide levels in the crust from 220 to 150 units in 20% pumpkin flour bread compared to 60 min proofing. Control bread showed the highest specific volume (2.40 ± 0.01 cm3/g) after 2 h of proofing, while 20% pumpkin flour addition decreased it to 1.69 ± 0.02 cm3/g. Initial hardness increased from 6.8 ± 1.5 N in the control to 14.3 ± 1.5 N in 20% pumpkin flour bread after 1-h of proofing. Water activity decreased from 0.966 ± 0.002 in the control to 0.945 ± 0.004 in 20% pumpkin flour samples with 2 h proofing. Optimal results were achieved with 5–10% pumpkin flour substitution combined with two-hour proofing, balancing improved nutritional properties and reduced acrylamide formation while maintaining acceptable bread quality parameters. [ABSTRACT FROM AUTHOR]

With growing environmental and health concerns surrounding meat consumption, meat analogs have emerged as sustainable and health-conscious alternatives. A major challenge in developing these products is replicating the fibrous, elastic texture of meat, where microbial transglutaminase (MTG) has shown significant potential. MTG catalyzes protein cross-linking, enhancing the structural integrity of meat analogs. This study aimed to evaluate the effects of MTG concentrations (0%, 0.5%, and 1%) and incubation times (0, 1.5, and 3 h) on the quality and rheological properties of meat analogs. Analogs were tested for pH, protein content, dry matter, fat retention, and thermal loss. Textural properties, including hardness, cohesiveness, gumminess, springiness, and chewiness, were determined using texture profile analysis, while leakage parameters were evaluated through water and fat content tests. Results revealed that higher MTG concentrations and longer incubation times improved protein content (14.34% to 15.55%), dry matter (29.61% to 32.53%), and reduced total leakage (1.262% to 0.634%). Textural properties, including hardness (57.08 N to 83.14 N), gumminess (19.40 N to 30.00 N), and chewiness (17.60 N × mm to 29.58 N × mm), also significantly improved with increasing MTG levels. Thermal loss ranged from 98.37% to 100.9%, showing enhanced retention at higher MTG concentrations. These results support the role of MTG in creating meat analogs with improved meat-like textures, achieved through enhanced protein cross-linking and moisture retention. [ABSTRACT FROM AUTHOR]

Plant proteins are increasingly incorporated into food products to enhance their nutritional value. However, little is known about how this alters the textural perceptions of such products. This study investigated the substitution of up to 35% wheat flour with pea protein isolate (PPI) into pasta sheets to determine how this influenced texture. Furthermore, an in vivo human mastication test (n = 116 participants) was conducted to evaluate oral tactile perceptions (perceived firmness, stickiness, and brittleness) and chewing time associated with PPI-containing pasta. Cooked pasta hardness decreased from 145 to 96 N at 5% PPI substitution due to the disruption of gluten network but increased to 144 N at 15–25% PPI substitution, indicating a stronger protein network at higher PPI substitution levels. In vivo, pasta substituted with 25% PPI required a shorter chewing time and was perceived as less firm, less sticky, and more brittle than wheat flour-only pasta. Regardless of pasta samples, fast chewers (average chewing time ≤13 s) were better at recognizing differences in pasta firmness, while slow chewers (>13 s) were more sensitive to changes in stickiness and brittleness. The results obtained in this study could contribute to the design of protein-rich pasta tailored to populations with specific texture requirements (e.g., softer texture for the elderly). [ABSTRACT FROM AUTHOR]

This research assessed the feasibility of adding Cochayuyo seaweed flour (at 30, 50, and 70% levels) to rice flour-based paste to improve its 3D printing quality. The paste's rheological properties, printing quality, texture profile, thermal properties, and color of 3D-printed foods were explored. Results showed that pastes with Cochayuyo addition exhibited shear-thinning behavior, and viscosity increased with increased Cochayuyo concentration. Viscoelastic properties and a Texture Profile Analysis (TPA) revealed that Cochayuyo improved mechanical strength and made the paste easier to flow, improving printed food's extrudability, fidelity, and shape retention, which was better observed in RC50 and RC70 printed at 15 mm s−1. A differential scanning calorimetry (DSC) analysis showed a partial substitution of rice flour for Cochayuyo flour in the formulation. This increased the onset and melting peak temperatures and reduced the enthalpy of fusion. CIE color parameters a*, b*, and L* showed that Cochayuyo addition increased the color to yellow and red; however, lightness was considerably reduced. Therefore, Cochayuyo flour could have the potential to be used for the manufacture improvement of 3D-printed food with better rheological, mechanical, thermal, printing quality, and nutritional properties, making possible the exploitation of the native Cochayuyo seaweed, which is highly available in Chile. [ABSTRACT FROM AUTHOR]

Researchers are exploring solutions to meet the growing demand for protein due to the expected increase in global population by 2050. Interest in alternative protein sources like insects has risen, driven by concerns about environmental impact and the need for sustainable food production. This study aimed to develop and evaluate the physicochemical properties of soy-protein-based burgers enriched with insect protein from Alphitobius diaperinus. Three formulations were developed: a control (B0) and burgers with 5% (B5) and 10% (B10) insect protein—Whole Buffalo Powder (WBP). The results showed that adding insect protein decreased the burger analogue's pH. A clear trend was observed of increasing total lipids and saturated fatty acids (SFA) and decreasing monounsaturated (MUFA) and polyunsaturated fatty acids (PUFA) as the WBP concentration increased from 0% to 10%. No significant differences with increasing WBP concentration in the protein content of the burger analogue, as well as the cooking yield, were noted. The WBP addition had a notable effect on the color change, especially a decrease in brightness (L*). It was shown that as the WBP concentration increased, there were no significant differences in the texture profile of the burger analogues. The formulation with 5% WBP concentration was the most acceptable in sensory analysis. [ABSTRACT FROM AUTHOR]

With growing environmental and health concerns surrounding meat consumption, meat analogs have emerged as sustainable and health-conscious alternatives. A major challenge in developing these products is replicating the fibrous, elastic texture of meat, where microbial transglutaminase (MTG) has shown significant potential. MTG catalyzes protein cross-linking, enhancing the structural integrity of meat analogs. This study aimed to evaluate the effects of MTG concentrations (0%, 0.5%, and 1%) and incubation times (0, 1.5, and 3 h) on the quality and rheological properties of meat analogs. Analogs were tested for pH, protein content, dry matter, fat retention, and thermal loss. Textural properties, including hardness, cohesiveness, gumminess, springiness, and chewiness, were determined using texture profile analysis, while leakage parameters were evaluated through water and fat content tests. Results revealed that higher MTG concentrations and longer incubation times improved protein content (14.34% to 15.55%), dry matter (29.61% to 32.53%), and reduced total leakage (1.262% to 0.634%). Textural properties, including hardness (57.08 N to 83.14 N), gumminess (19.40 N to 30.00 N), and chewiness (17.60 N × mm to 29.58 N × mm), also significantly improved with increasing MTG levels. Thermal loss ranged from 98.37% to 100.9%, showing enhanced retention at higher MTG concentrations. These results support the role of MTG in creating meat analogs with improved meat-like textures, achieved through enhanced protein cross-linking and moisture retention.

Plant proteins are increasingly incorporated into food products to enhance their nutritional value. However, little is known about how this alters the textural perceptions of such products. This study investigated the substitution of up to 35% wheat flour with pea protein isolate (PPI) into pasta sheets to determine how this influenced texture. Furthermore, an in vivo human mastication test (n = 116 participants) was conducted to evaluate oral tactile perceptions (perceived firmness, stickiness, and brittleness) and chewing time associated with PPI-containing pasta. Cooked pasta hardness decreased from 145 to 96 N at 5% PPI substitution due to the disruption of gluten network but increased to 144 N at 15–25% PPI substitution, indicating a stronger protein network at higher PPI substitution levels. In vivo, pasta substituted with 25% PPI required a shorter chewing time and was perceived as less firm, less sticky, and more brittle than wheat flour-only pasta. Regardless of pasta samples, fast chewers (average chewing time ≤13 s) were better at recognizing differences in pasta firmness, while slow chewers (>13 s) were more sensitive to changes in stickiness and brittleness. The results obtained in this study could contribute to the design of protein-rich pasta tailored to populations with specific texture requirements (e.g., softer texture for the elderly).

This study aimed to investigate the incorporation of micronized salt (MS) to reduce sodium content in fresh sausages while preserving technological, chemical, textural, and sensory characteristics. Four treatments were prepared: control (C) with 2.0% regular salt; M2.0% with 2.0% micronized salt; M1.5% with 1.5% micronized salt; and M1.0% with 1.0% micronized salt, containing 1004, 1133, 860, and 525 mg of sodium/100 g of product, respectively. To characterize the samples, analyses of sodium content, cooking loss, relative myoglobin content, and instrumental color were carried out. The sensory analysis was performed using the Temporal-Check-All-That-Apply (TCATA) method. Half of the micronized salt treatment was mixed with the fat during the processing of the fresh sausages. It was possible to achieve a 50% reduction in sodium (M1.0%) in the fresh sausages without negative effects on most technological, chemical, and textural parameters, which did not differ from the control treatment (C). Conversely, "chewiness" decreased in M2.0% compared to the control (C) due to mixing micronized salt with the fat. The sodium reduction did not impact the temporal sensory profile and overall liking. Therefore, using micronized salt in fresh sausages reduces sodium content without affecting sensory traits and product stability. [ABSTRACT FROM AUTHOR]

The epimysium, also known as silver skin, is a fascia of connective tissue that surrounds each muscle. During fabrication, epimysium is removed from intact cuts, and it can be used as a source of collagen in processed meats to reduce production costs. However, little is known about the emulsifying properties of this collagen source. Thus, this study aimed to evaluate the effect of three levels of beef epimysium (silver skin, 0, 5, and 10%) on meat emulsion stability and on its cooked characteristics. Beef silver skin partially replaced ground beef, pork, and fat trimming, while all the other ingredients remained constant across formulations. The inclusion of silver skin did not affect (p > 0.05) chemical composition, total cooking loss, water loss, and raw emulsion color. Cooking fat loss linearly increased (p = 0.02) while cooked emulsion L* linearly decreased (p = 0.04) as silver skin level increased. Hardness, gumminess, and chewiness decreased linearly as silver skin levels increased (p < 0.01). Overall, incorporating silver skin into meat emulsions reduced stability, increased fat loss, and led to a weaker cooked emulsion matrix. [ABSTRACT FROM AUTHOR]

This study investigated the feasibility of replacing pork meat with pea protein isolate in canned pâtés at proportions ranging from 12.5% to 50%. The results indicated that protein reformulation did not significantly impact the protein content and lipid oxidation of the pâtés. Reformulated products exhibited a decrease in a∗ values and an increase in b∗ values. These color changes were also sensorially identified in the Check-All-That-Apply (CATA) test, where the reformulated pâtés were associated with attributes such as 'yellow color' and 'unpleasant color', which were inversely related to product acceptance. The protein reformulation reduced the hardness, gumminess, and chewiness parameters of the pâtés. These textural changes were positively reflected in the CATA test, where the reformulated products were characterized by attributes like 'soft texture', 'pleasant texture', and 'good spreadability', which strongly correlated with higher consumer acceptance. Notably, pâtés with 37.5% and 50% substitutions of pork meat with pea protein showed acceptability levels comparable to the control, and those with up to a 25% substitution exhibited superior sensory acceptability. However, the color alteration suggests the need for future optimization, such as using natural colorants. In summary, the results of this study not only validate the feasibility of replacing pork meat with pea protein in pâtés but also offer valuable insights for future investigations to develop more innovative and sustainable meat products. [ABSTRACT FROM AUTHOR]

Researchers are exploring solutions to meet the growing demand for protein due to the expected increase in global population by 2050. Interest in alternative protein sources like insects has risen, driven by concerns about environmental impact and the need for sustainable food production. This study aimed to develop and evaluate the physicochemical properties of soy-protein-based burgers enriched with insect protein from Alphitobius diaperinus. Three formulations were developed: a control (B0) and burgers with 5% (B5) and 10% (B10) insect protein—Whole Buffalo Powder (WBP). The results showed that adding insect protein decreased the burger analogue’s pH. A clear trend was observed of increasing total lipids and saturated fatty acids (SFA) and decreasing monounsaturated (MUFA) and polyunsaturated fatty acids (PUFA) as the WBP concentration increased from 0% to 10%. No significant differences with increasing WBP concentration in the protein content of the burger analogue, as well as the cooking yield, were noted. The WBP addition had a notable effect on the color change, especially a decrease in brightness (L*). It was shown that as the WBP concentration increased, there were no significant differences in the texture profile of the burger analogues. The formulation with 5% WBP concentration was the most acceptable in sensory analysis.

This research assessed the feasibility of adding Cochayuyo seaweed flour (at 30, 50, and 70% levels) to rice flour-based paste to improve its 3D printing quality. The paste’s rheological properties, printing quality, texture profile, thermal properties, and color of 3D-printed foods were explored. Results showed that pastes with Cochayuyo addition exhibited shear-thinning behavior, and viscosity increased with increased Cochayuyo concentration. Viscoelastic properties and a Texture Profile Analysis (TPA) revealed that Cochayuyo improved mechanical strength and made the paste easier to flow, improving printed food’s extrudability, fidelity, and shape retention, which was better observed in RC50 and RC70 printed at 15 mm s−1. A differential scanning calorimetry (DSC) analysis showed a partial substitution of rice flour for Cochayuyo flour in the formulation. This increased the onset and melting peak temperatures and reduced the enthalpy of fusion. CIE color parameters a*, b*, and L* showed that Cochayuyo addition increased the color to yellow and red; however, lightness was considerably reduced. Therefore, Cochayuyo flour could have the potential to be used for the manufacture improvement of 3D-printed food with better rheological, mechanical, thermal, printing quality, and nutritional properties, making possible the exploitation of the native Cochayuyo seaweed, which is highly available in Chile.

This study aimed to investigate the incorporation of micronized salt (MS) to reduce sodium content in fresh sausages while preserving technological, chemical, textural, and sensory characteristics. Four treatments were prepared: control (C) with 2.0% regular salt; M2.0% with 2.0% micronized salt; M1.5% with 1.5% micronized salt; and M1.0% with 1.0% micronized salt, containing 1004, 1133, 860, and 525 mg of sodium/100 g of product, respectively. To characterize the samples, analyses of sodium content, cooking loss, relative myoglobin content, and instrumental color were carried out. The sensory analysis was performed using the Temporal-Check-All-That-Apply (TCATA) method. Half of the micronized salt treatment was mixed with the fat during the processing of the fresh sausages. It was possible to achieve a 50% reduction in sodium (M1.0%) in the fresh sausages without negative effects on most technological, chemical, and textural parameters, which did not differ from the control treatment (C). Conversely, “chewiness” decreased in M2.0% compared to the control (C) due to mixing micronized salt with the fat. The sodium reduction did not impact the temporal sensory profile and overall liking. Therefore, using micronized salt in fresh sausages reduces sodium content without affecting sensory traits and product stability.

Extending the shelf life of gluten-free bread (GFB) is a challenge. Mainly due to the ingredients used and their characteristics, GFB has numerous drawbacks such as unsatisfactory texture and rapid staling beyond a low nutritional value. In the present study, flaxseed oil cake extract (FOCE) was used to replace water (25–100%) in GFB formulations in order to test FOCE's potential to reduce GFB staling and extend microbial stability. Texture (TPA test), water activity (LF NMR), acidity (pH measurements) and microbiological quality of GFBs were tested. Moreover, the content of a lignan with broad health-promoting potential, secoisolariciresinol diglucoside (SDG), in GFB with FOCE was analyzed. The results showed that the use of FOCE enriched experimental GFB in valuable SDG (217–525 µg/100 g DM) while not causing adverse microbiological changes. A moderate level (25–50%) of FOCE did not change the main texture parameters of GFB stored for 72 h, the quality of which was comparable to control bread without FOCE. Meanwhile, higher proportions of FOCE (75–100% of water replacement) shortened GFB shelf life as determined by water activity and texture profile, suggesting that GFB with FOCE should be consumed fresh. To summarize, FOCE at moderate levels can add value to GFBs without causing a drop in quality, while still fitting in with the idea of zero waste and the circular economy. [ABSTRACT FROM AUTHOR]

Approximately 500 thousand tons of cocoa bean shells (CSs) are generated annually and treated as waste. However, their composition is of great nutritional, technological, and economic interest due to their dietary fiber (46.4 to 60.6%), protein (11.6 to 18.1%), and lipid contents (2 to 18.5%), as well as the presence of flavonoids and alkaloids. Thus, this study aimed to obtain CS flour by milling the CSs, characterizing the flour according to its chemical composition and functionalities, and then applying it in the production of cookies, substituting a wheat flour portion (10, 20, 30, and 40%) with CS flour. Cookies were characterized in terms of water, lipids, proteins, phenolic (PC), and total flavanol (FLA) contents, and specific volume (SV), hardness (H), and L*, a*, and b color scale parameters. Increasing the amount of CS showed positive results, as the cookies were enriched with PC (0.68 to 2.37 mg gallic acid equivalents/g of sample) and FLA (0.10 to 0.19 mg epicatechin equivalents/g of sample) but increased hardness (353 to 472 N). By associating the responses, it was concluded that the wheat flour replacement with 30% CS presented values of PC and FLA 3 and 1.6 times higher than the control and could be a formulation of interest to consumers. [ABSTRACT FROM AUTHOR]

The epimysium, also known as silver skin, is a fascia of connective tissue that surrounds each muscle. During fabrication, epimysium is removed from intact cuts, and it can be used as a source of collagen in processed meats to reduce production costs. However, little is known about the emulsifying properties of this collagen source. Thus, this study aimed to evaluate the effect of three levels of beef epimysium (silver skin, 0, 5, and 10%) on meat emulsion stability and on its cooked characteristics. Beef silver skin partially replaced ground beef, pork, and fat trimming, while all the other ingredients remained constant across formulations. The inclusion of silver skin did not affect (p > 0.05) chemical composition, total cooking loss, water loss, and raw emulsion color. Cooking fat loss linearly increased (p = 0.02) while cooked emulsion L* linearly decreased (p = 0.04) as silver skin level increased. Hardness, gumminess, and chewiness decreased linearly as silver skin levels increased (p < 0.01). Overall, incorporating silver skin into meat emulsions reduced stability, increased fat loss, and led to a weaker cooked emulsion matrix.

It is of great significance for the aquaculture industry to determine how rearing salinity impacts fish flesh quality. In the present study, largemouth bass was cultured in different salinities (0%, 0.3%, 0.9%) for 10 weeks, and the effect on flesh texture, flavor compounds, taste, and fatty acid composition was evaluated. We show that rearing salinity not only increased flesh water-holding capacity, but also enhanced muscle hardness, chewiness, gumminess, and adhesiveness, which was consistent with the finding in the shear value test. Morphology analysis further revealed that the effect of salinity on flesh texture was probably related to changes in myofibril diameter and density. As for the taste of the flesh, water salinity improved the contents of both sweet and umami amino acids, and reduced the contents of bitter amino acid. Meanwhile, the content of IMP, the dominant flavor nucleotide in largemouth bass muscle, was significantly higher in the 0.9% group. Interestingly, electronic-tongue analysis demonstrated that the positive effect of salinity on flavor compounds enhanced the umami taste and taste richness of flesh. Moreover, rearing salinity improved the contents of C20: 5n-3 (EPA) and C22: 6n-3 (DHA) in back muscle. Therefore, rearing largemouth bass in adequate salinity may be a practical approach to improving flesh quality. [ABSTRACT FROM AUTHOR]

This study investigated the feasibility of replacing pork meat with pea protein isolate in canned pâtés at proportions ranging from 12.5% to 50%. The results indicated that protein reformulation did not significantly impact the protein content and lipid oxidation of the pâtés. Reformulated products exhibited a decrease in a∗ values and an increase in b∗ values. These color changes were also sensorially identified in the Check-All-That-Apply (CATA) test, where the reformulated pâtés were associated with attributes such as ‘yellow color’ and ‘unpleasant color’, which were inversely related to product acceptance. The protein reformulation reduced the hardness, gumminess, and chewiness parameters of the pâtés. These textural changes were positively reflected in the CATA test, where the reformulated products were characterized by attributes like ‘soft texture’, ‘pleasant texture’, and ‘good spreadability’, which strongly correlated with higher consumer acceptance. Notably, pâtés with 37.5% and 50% substitutions of pork meat with pea protein showed acceptability levels comparable to the control, and those with up to a 25% substitution exhibited superior sensory acceptability. However, the color alteration suggests the need for future optimization, such as using natural colorants. In summary, the results of this study not only validate the feasibility of replacing pork meat with pea protein in pâtés but also offer valuable insights for future investigations to develop more innovative and sustainable meat products.

Hemp seed flour (HSF) is a by-product of the hemp oil production process and is a valuable source of protein, dietary fiber, minerals, and vitamins. In line with sustainable food production and a circular economy, this research aimed to utilize HSF as fortifying ingredient in the production of gnocchi, a typical Italian potato-based fresh pasta, and to investigate the effects of the addition on the quality and consumers' acceptability of the enriched products. Three formulations have been developed using 5–20% HSF in substitution of soft wheat flour. Nutritional value, cooking quality, color, texture and sensory profile, and the consumers' acceptability of gnocchi samples were evaluated, as well as the functional properties of pure and composite flours and the HSF aroma compounds. HSF addition allowed to enhance the nutritional value of gnocchi, gaining the nutritional claim of "source of fiber" in case of formulations with ≥10% of HSF. Moreover, the fortified gnocchi had a high technological quality in terms of cooking loss, cooking resistance and textural properties, and average sensory quality; however, the vegetable and hemp odor and the bitter taste make them not well appreciated by consumers highlighting the need for improving the HSF sensory quality for consumers' satisfaction. [ABSTRACT FROM AUTHOR]

Approximately 500 thousand tons of cocoa bean shells (CSs) are generated annually and treated as waste. However, their composition is of great nutritional, technological, and economic interest due to their dietary fiber (46.4 to 60.6%), protein (11.6 to 18.1%), and lipid contents (2 to 18.5%), as well as the presence of flavonoids and alkaloids. Thus, this study aimed to obtain CS flour by milling the CSs, characterizing the flour according to its chemical composition and functionalities, and then applying it in the production of cookies, substituting a wheat flour portion (10, 20, 30, and 40%) with CS flour. Cookies were characterized in terms of water, lipids, proteins, phenolic (PC), and total flavanol (FLA) contents, and specific volume (SV), hardness (H), and L*, a*, and b color scale parameters. Increasing the amount of CS showed positive results, as the cookies were enriched with PC (0.68 to 2.37 mg gallic acid equivalents/g of sample) and FLA (0.10 to 0.19 mg epicatechin equivalents/g of sample) but increased hardness (353 to 472 N). By associating the responses, it was concluded that the wheat flour replacement with 30% CS presented values of PC and FLA 3 and 1.6 times higher than the control and could be a formulation of interest to consumers.

Extending the shelf life of gluten-free bread (GFB) is a challenge. Mainly due to the ingredients used and their characteristics, GFB has numerous drawbacks such as unsatisfactory texture and rapid staling beyond a low nutritional value. In the present study, flaxseed oil cake extract (FOCE) was used to replace water (25–100%) in GFB formulations in order to test FOCE’s potential to reduce GFB staling and extend microbial stability. Texture (TPA test), water activity (LF NMR), acidity (pH measurements) and microbiological quality of GFBs were tested. Moreover, the content of a lignan with broad health-promoting potential, secoisolariciresinol diglucoside (SDG), in GFB with FOCE was analyzed. The results showed that the use of FOCE enriched experimental GFB in valuable SDG (217–525 µg/100 g DM) while not causing adverse microbiological changes. A moderate level (25–50%) of FOCE did not change the main texture parameters of GFB stored for 72 h, the quality of which was comparable to control bread without FOCE. Meanwhile, higher proportions of FOCE (75–100% of water replacement) shortened GFB shelf life as determined by water activity and texture profile, suggesting that GFB with FOCE should be consumed fresh. To summarize, FOCE at moderate levels can add value to GFBs without causing a drop in quality, while still fitting in with the idea of zero waste and the circular economy.

Legumes are not valued by all consumers, mostly due to the prolonged soaking and cooking process they require. This problem could be solved by preparing legume-based ready-to-eat snacks. In this study, the effect of two different dies (circular and star-shaped, with cross-sections of 19.6 and 35.9 mm2 , respectively) on the physico-chemical properties, anti-nutritional compounds, and sensory features of extruded breakfast snacks was determined. Extruded products were obtained from 100% legume flours of red lentil, faba bean, brown pea, and common bean. The extrusioncooking conditions were 2.5 g/s feed rate; 160 ± 1 °C die temperature; 16 ± 1 g/100 g feed moisture, and 230 rpm screw speed. Star-shaped extrudates showed a lower expansion ratio, degree of starch gelatinization, and water solubility index, as well as higher bulk density, hardness, crunchiness, and lightness (L*) values. The oligosaccharides showed non univocal variations by changing the die, whereas phytates did not vary at all. The extrudates from lentil flour (richer in fiber) were the least preferred by sensory panelists, due to their hard texture. However, the spherical extrudates were preferred over the star-shaped product. These results emphasize the possibility of improving the physico-chemical and sensory properties of legume extrudates by selecting a proper die. [ABSTRACT FROM AUTHOR]

It is of great significance for the aquaculture industry to determine how rearing salinity impacts fish flesh quality. In the present study, largemouth bass was cultured in different salinities (0%, 0.3%, 0.9%) for 10 weeks, and the effect on flesh texture, flavor compounds, taste, and fatty acid composition was evaluated. We show that rearing salinity not only increased flesh water-holding capacity, but also enhanced muscle hardness, chewiness, gumminess, and adhesiveness, which was consistent with the finding in the shear value test. Morphology analysis further revealed that the effect of salinity on flesh texture was probably related to changes in myofibril diameter and density. As for the taste of the flesh, water salinity improved the contents of both sweet and umami amino acids, and reduced the contents of bitter amino acid. Meanwhile, the content of IMP, the dominant flavor nucleotide in largemouth bass muscle, was significantly higher in the 0.9% group. Interestingly, electronic-tongue analysis demonstrated that the positive effect of salinity on flavor compounds enhanced the umami taste and taste richness of flesh. Moreover, rearing salinity improved the contents of C20: 5n-3 (EPA) and C22: 6n-3 (DHA) in back muscle. Therefore, rearing largemouth bass in adequate salinity may be a practical approach to improving flesh quality.

Hemp seed flour (HSF) is a by-product of the hemp oil production process and is a valuable source of protein, dietary fiber, minerals, and vitamins. In line with sustainable food production and a circular economy, this research aimed to utilize HSF as fortifying ingredient in the production of gnocchi, a typical Italian potato-based fresh pasta, and to investigate the effects of the addition on the quality and consumers’ acceptability of the enriched products. Three formulations have been developed using 5–20% HSF in substitution of soft wheat flour. Nutritional value, cooking quality, color, texture and sensory profile, and the consumers’ acceptability of gnocchi samples were evaluated, as well as the functional properties of pure and composite flours and the HSF aroma compounds. HSF addition allowed to enhance the nutritional value of gnocchi, gaining the nutritional claim of “source of fiber” in case of formulations with ≥10% of HSF. Moreover, the fortified gnocchi had a high technological quality in terms of cooking loss, cooking resistance and textural properties, and average sensory quality; however, the vegetable and hemp odor and the bitter taste make them not well appreciated by consumers highlighting the need for improving the HSF sensory quality for consumers’ satisfaction.

To investigate the mechanism of the texture formed by protein thermal denaturation, the profile and formation of texture and thermal denaturation of protein were evaluated using texture profile analysis (TPA) and transmission electron microscopy (TEM) combined with differential scanning calorimeter (DSC). Results indicated that the surface temperature of Beijing roast duck increased from 23.9 to 174.4 °C, while the center temperature rose from 20.6 to 99.3 °C during roasting. Shear force decreased significantly during the first 20 min, and the texture profile largely changed at 20 and 40 min. Firstly, Band I was broken and twisted, Band A was overstruck, and Z-line was diffused and finally disappeared, resulting in a blurred myofibril structure. The sarcomere considerably contracted within 30 min. Secondly, the main myofibrillar proteins were denatured at 20 and 40 min, respectively. The formation of hydrophobic interactions and the reduction of ionic bonds were observed. Thirdly, roasting induced protein thermal denaturation, which was correlated with interprotein forces, texture profile, and the shear force. Muscle fibers were damaged and shrunken, accompanied by the formation of hydrophobic interactions and the reduction of ionic bonds. The turning points were at 20 and 40 min, and the main proteins were denatured, leading to the formation of tenderness of Beijing roast duck.

Legumes are not valued by all consumers, mostly due to the prolonged soaking and cooking process they require. This problem could be solved by preparing legume-based ready-to-eat snacks. In this study, the effect of two different dies (circular and star-shaped, with cross-sections of 19.6 and 35.9 mm2, respectively) on the physico-chemical properties, anti-nutritional compounds, and sensory features of extruded breakfast snacks was determined. Extruded products were obtained from 100% legume flours of red lentil, faba bean, brown pea, and common bean. The extrusion-cooking conditions were 2.5 g/s feed rate; 160 ± 1 °C die temperature; 16 ± 1 g/100 g feed moisture, and 230 rpm screw speed. Star-shaped extrudates showed a lower expansion ratio, degree of starch gelatinization, and water solubility index, as well as higher bulk density, hardness, crunchiness, and lightness (L*) values. The oligosaccharides showed non univocal variations by changing the die, whereas phytates did not vary at all. The extrudates from lentil flour (richer in fiber) were the least preferred by sensory panelists, due to their hard texture. However, the spherical extrudates were preferred over the star-shaped product. These results emphasize the possibility of improving the physico-chemical and sensory properties of legume extrudates by selecting a proper die.

Due to its structural and organoleptic functions, sucrose is one of the primary ingredients of many baked confectionery products. In turn, the growing awareness of the association between sugar overconsumption and the development of chronic diseases has prompted the urgent need to reduce the amount of refined sugar in foods. This study aimed to evaluate the effect of complete sucrose replacement with inulin-type fructans (ITFs), namely fructooligosaccharide (FOS), inulin (INU) or oligofructose-enriched inulin (SYN), with different degrees of polymerization on the technological parameters and sensory quality of gluten-free sponge cakes (GFSs). The use of ITFs as the sole sweetening ingredient resulted in the similar appearance of the experimental GFSs to that of the control sample. In addition, all GFSs containing ITFs had similar height, while their baking weight loss was significantly (p < 0.05) lower compared to the control products. The total sugar exchange for long-chain INU increased the crumb hardness, while the crumb of the GFS with FOS was as soft as of the control products. The sensory analysis showed that the GFS containing FOS obtained the highest scores for the overall quality assessment, similar to the sugar-containing control sponge cake. The results obtained prove that sucrose is not necessary to produce GFSs with appropriate technological parameters and a high sensory quality. Thus, it can be concluded that sucrose can be successfully replaced with ITF, especially with FOS, in this type of baked confectionery product.

This study investigated the effect of wheat bran (WB) supplementation on the physical and sensory properties of a South African cereal fried dough (magwinya). The physical properties, instrumental texture, and sensory profile were determined for magwinya (100:0, control) and for wheat flour to wheat-bran ratios of 95:5 (MWB5), 90:10 (MWB10), 85:15 (MWB15), and 80:20 (MWB20). An increase in the proportion of WB in the fried dough showed no significant difference on the specific volume (1.47−1.54) of samples. The chroma value (30.19−22.29), lightness (35.92−28.98), and hue angle (55.03−47.77) decreased, while ∆E increased distinctly with the addition of WB. Magwinya supplemented with WB was less cohesive and easy to chew. Significant correlations were found between instrumental hardness and sensory springiness (r = −0.63; p < 0.05), as well as between instrumental cohesiveness and sensory springiness (r = −0.71; p < 0.01). Two principal components were identified, which accounted for 85.1% of the variance in the instrumental data. A substitution level of 5 and 10% WB was similar to the sensory properties of the control in taste, texture, and overall acceptability and can replace part of the wheat flour in the cereal fried dough production.

To investigate the mechanism of the texture formed by protein thermal denaturation, the profile and formation of texture and thermal denaturation of protein were evaluated using texture profile analysis (TPA) and transmission electron microscopy (TEM) combined with differential scanning calorimeter (DSC). Results indicated that the surface temperature of Beijing roast duck increased from 23.9 to 174.4 °C, while the center temperature rose from 20.6 to 99.3 °C during roasting. Shear force decreased significantly during the first 20 min, and the texture profile largely changed at 20 and 40 min. Firstly, Band I was broken and twisted, Band A was overstruck, and Z-line was diffused and finally disappeared, resulting in a blurred myofibril structure. The sarcomere considerably contracted within 30 min. Secondly, the main myofibrillar proteins were denatured at 20 and 40 min, respectively. The formation of hydrophobic interactions and the reduction of ionic bonds were observed. Thirdly, roasting induced protein thermal denaturation, which was correlated with interprotein forces, texture profile, and the shear force. Muscle fibers were damaged and shrunken, accompanied by the formation of hydrophobic interactions and the reduction of ionic bonds. The turning points were at 20 and 40 min, and the main proteins were denatured, leading to the formation of tenderness of Beijing roast duck. [ABSTRACT FROM AUTHOR]

Due to its structural and organoleptic functions, sucrose is one of the primary ingredients of many baked confectionery products. In turn, the growing awareness of the association between sugar overconsumption and the development of chronic diseases has prompted the urgent need to reduce the amount of refined sugar in foods. This study aimed to evaluate the effect of complete sucrose replacement with inulin-type fructans (ITFs), namely fructooligosaccharide (FOS), inulin (INU) or oligofructose-enriched inulin (SYN), with different degrees of polymerization on the technological parameters and sensory quality of gluten-free sponge cakes (GFSs). The use of ITFs as the sole sweetening ingredient resulted in the similar appearance of the experimental GFSs to that of the control sample. In addition, all GFSs containing ITFs had similar height, while their baking weight loss was significantly (p < 0.05) lower compared to the control products. The total sugar exchange for long-chain INU increased the crumb hardness, while the crumb of the GFS with FOS was as soft as of the control products. The sensory analysis showed that the GFS containing FOS obtained the highest scores for the overall quality assessment, similar to the sugar-containing control sponge cake. The results obtained prove that sucrose is not necessary to produce GFSs with appropriate technological parameters and a high sensory quality. Thus, it can be concluded that sucrose can be successfully replaced with ITF, especially with FOS, in this type of baked confectionery product. [ABSTRACT FROM AUTHOR]

This study investigated the effect of wheat bran (WB) supplementation on the physical and sensory properties of a South African cereal fried dough (magwinya). The physical properties, instrumental texture, and sensory profile were determined for magwinya (100:0, control) and for wheat flour to wheat-bran ratios of 95:5 (MWB5), 90:10 (MWB10), 85:15 (MWB15), and 80:20 (MWB20). An increase in the proportion of WB in the fried dough showed no significant difference on the specific volume (1.47–1.54) of samples. The chroma value (30.19–22.29), lightness (35.92–28.98), and hue angle (55.03–47.77) decreased, while ∆E increased distinctly with the addition of WB. Magwinya supplemented with WB was less cohesive and easy to chew. Significant correlations were found between instrumental hardness and sensory springiness (r = −0.63; p < 0.05), as well as between instrumental cohesiveness and sensory springiness (r = −0.71; p < 0.01). Two principal components were identified, which accounted for 85.1% of the variance in the instrumental data. A substitution level of 5 and 10% WB was similar to the sensory properties of the control in taste, texture, and overall acceptability and can replace part of the wheat flour in the cereal fried dough production. [ABSTRACT FROM AUTHOR]