Search

Pastry products constitute a significant segment of the food market. However, the high amount of fat used in their production poses a challenge when competing for the attention of modern consumers, who are more conscious of the health problems associated with the consumption of high-fat products. With this in mind, the main objective of this study is the reduction of the total fat and saturated fat contents of two bakery products, brioche-type bread and rice cake, by partial substitution of the main fat source with Chlorella vulgaris lipid extracts obtained through non-thermal high-pressure extraction (HPE). A reduction of 3% in the fat content of the brioche and a reduction of 11.4% in the total fat content of the rice cake were observed when the microalgae extracts were used to replace 10% of the margarine used in the brioche and 20% of the sunflower oil used in the rice cake. This substitution resulted in fat-reduced bakery products with similar physicochemical and nutritional properties to the full-fat controls. A triangle test demonstrated that no differences were perceived for the fat-reduced brioche, while in the rice cake, only slightly perceptible differences were detected. Moreover, brioche and rice cake containing the extract presented values of 1.22 ± 0.27 and 1.29 ± 0.39 mg GAE/g of total phenolic compounds, respectively. DPPH and FRAP activities were also quantified in 0.95 ± 0.38 and 1.83 ± 0.27 µmol AAE/g for brioche with extract and 1.10 ± 0.61 and 1.39 ± 0.39 µmol AAE/g for the rice cake with extract, respectively. The products were microbially stable for at least four days at room temperature. This study demonstrates the potential of using HPE microalgal lipid extracts as fat substitutes in bakery products.

Due to its characteristics, fresh fish is a highly perishable food with a very short shelf-life under refrigeration. Several methods have been introduced to slow down its deterioration, such as by means of oxygen depletion of the food package (vacuum packaging), or by changing the natural atmosphere that is in contact with the fresh fish (modified atmosphere packaging), or by the use of chemicals generally recognized as safe: such compounds can be directly applied (by dipping or spraying) or incorporated into packaging materials and slowly migrate to the product, exerting a hurdle effect against microbial development and lipid oxidation (active packaging). This review aims to cover the most recent advances in chemical-based approaches for fresh fish preservation, applied either singly or in combination. Vacuum packaging, modified atmosphere, and active packaging preservation methodologies are presented, along with the inclusion of chemical additives, such as organic acids and natural extracts, and their combination with icing systems. Advantages and disadvantages of these methodologies and their impact on fresh fish quality and shelf-life are discussed, reaching the conclusion that both are positively influenced overall. Indeed, the contribution of chemical-based strategies for fresh fish preservation is undeniable, and is expected to be a research topic of increasing interest in the future.

An important factor in consumers' acceptability, beyond visual appearance and taste, is food texture. The elderly and people with dysphagia are more likely to present malnourishment due to visually and texturally unappealing food. Three-dimensional Printing is an additive manufacturing technology that can aid the food industry in developing novel and more complex food products and has the potential to produce tailored foods for specific needs. As a technology that builds food products layer by layer, 3D Printing can present a new methodology to design realistic food textures by the precise placement of texturing elements in the food, printing of multi-material products, and design of complex internal structures. This paper intends to review the existing work on 3D food printing and discuss the recent developments concerning food texture design. Advantages and limitations of 3D Printing in the food industry, the material-based printability and model-based texture, and the future trends in 3D Printing, including numerical simulations, incorporation of cooking technology to the printing, and 4D modifications are discussed. Key challenges for the mainstream adoption of 3D Printing are also elaborated on.

We live in a world of limited biological resources and ecosystems, which are essential to feed people. Consequently, diversifying target species and considering full exploitation are essential for fishery sustainability. The present study focuses on the valorization of three low commercial value fish species (blue jack mackerel, Trachurus picturatus ; black seabream, Spondyliosoma cantharus ; and piper gurnard, Trigla lyra ) and of two unexploited species (comber, Serranus cabrilla and boarfish, Capros aper ) through the development of marine-based food products with added value. A preliminary inquiry with 155 consumers from Região de Lisboa e Vale do Tejo (Center of Portugal) was conducted to assess fish consumption, the applicability of fish product innovation, and the importance of valorizing discarded fish. Five products (black seabream ceviche , smoked blue jack mackerel pâté, dehydrated piper gurnard, fried boarfish, and comber pastries) were developed and investigated for their sensory characteristics and consumer liking by hedonic tests to 90 consumers. The most important descriptors were identified for each product (texture, flavor, color, and appearance). Comber pastries had the highest purchase intention (88%), followed by black seabream ceviche (85%) and blue jack mackerel pâté (76%). Sensory evaluations showed a clear tendency of consumers to accept reformulated products, with the introduction of the low-value and unexploited species under study.

Overfishing is increasing over time, and according to FAO (Food and Agriculture Organization), about one third of the world's fish stocks are now overfished. Thus, diversifying the target species is essential for fisheries sustainability contributing to improve resource-efficient processes. Non-target species can be valuable resources for the development of new food products. However, those species are scarcely studied, and it is of high importance to trace their seasonal sensory profile as a first step towards their valorisation. Therefore, in this study, seasonal influence on sensory properties of five low commercial value or unexploited fish species, namely Trachurus picturatus (blue jack mackerel), Spondyliosoma cantharus (black seabream), Trigla lyra (piper gurnard), Serranus cabrilla (comber) and Capros aper (boarfish), was assessed in order to identify the most favourable season for catching each species. Fish samples were assessed by a panel of 16 semi-trained assessors for sensory attributes previously identified. The evaluation takes place every 2 months. Statistical differences were reported between attributes and seasons for all species, except for T. lyra , which did not present any difference in its sensory attributes throughout the year.

Fish is a very perishable food and therefore several storage strategies need to be employed to increase its shelf-life, guaranteeing its safety and quality from catch to consumption. Despite the advances in modern fish storage technologies, chilling and freezing are still the most common preservation methods used onboard. The present review aims to summarize strategies to increase the shelf-life of fresh (chilled) and frozen fish, as whole, gutted, or fillet, involving the assessment of different traditional cooling and freezing conditions of different fish species caught in different locations. Although there are other factors that influence the fish shelf-life, such as the fish species and the stress suffered during catch, storage time and temperature and the amount of ice are some of the most important. In addition, the way that fish is stored (whole, fillet, or gutted) also contributes to the final quality of the product. In most studies, whole chilled and frozen fish present longer shelf-life than those preserved as gutted and filleted. However, it should be noted that other factors related to the organism, capture method, and transport to the preparation/processing industry should be considered for shelf-life extension.

Fucus spiralis is an edible brown seaweed (SW) found in the Portuguese Coast. It has been reported to have high antioxidant activity, which may elicit a potential use for the food industry. However, little information is available on how the SW behaves during the digestive process and how the freeze-drying process might affect the bioaccessibility of the different compounds. Therefore, antioxidant activity, total polyphenols, lipid, and fatty acid contents were measured before and after in vitro simulation of the human digestive process, both in fresh and freeze-dry SW. F. spiralis had a lipid content of 3.49 ± 0.3% of dry weight (DW), which is a usual amount described for this SW genus. The total lipid bioaccessibility was 12.1 ± 0.1%. The major omega-3 fatty acid detected was eicosapentaenoic acid, 7.5 ± 0.1%, with a bioaccessibility percentage of 13.0 ± 1.0%. Four different methods-total phenolic content (TPC), ferric reducing antioxidant power (FRAP), oxygen radical absorbance capacity (ORAC), and 1,1-diphenyl-2-picryl-hydrazyl (DPPH)-were used to assess the antioxidant activity of F. spiralis . The bioaccessibility of the antioxidants studied, ranged between 42.7% and 59.5%, except the bioaccessibility of polyphenols in freeze-dried SW (23.0% ± 1.0%), suggesting that the freeze-drying process reduces the bioaccessibility of these compounds.

Type 2 Diabetes Mellitus (T2DM) is a chronic disease which corresponds to 90% of the worldwide cases of diabetes, mainly due to epigenetic factors such as unhealthy lifestyles. First line therapeutic approaches are based on lifestyle changes, most of the time complemented with medication mostly associated with several side effects and high costs. As a result, the scientific community is constantly working for the discovery and development of natural therapeutic strategies that provide lower financial impact and minimize side effects. This review focus on these nature-based therapeutic strategies for prevention and control of T2DM, with a special emphasis on natural compounds that present pharmacological activity as dipeptidyl peptidase-4 (DPP4), alpha-amylase, alpha-glucosidase, lipase, and protein tyrosine phosphatase 1B (PTP1B) inhibitors.

In this study, nutritional composition (protein, lipids, carbohydrates, ash, and moisture), physicochemical properties (soluble solid content, titratable acidity, texture and instrumental colour on surface, and internal section), phytochemicals (total phenolic content and anthocyanin content), and antioxidant capacity (DPPH-2,2'-diphenyl-1-picrylhydrazyl radical scavenging capacity and ferric-reducing antioxidant power) of three strawberry ( Fragaria × ananassa Duch.) cultivars (cv. "Primoris", cv. "Endurance", and cv. "Portola") produced in the western region of Portugal (Caldas da Rainha) were evaluated. From the obtained, results no significant differences ( P > 0.05) in nutritional composition were detected in all of the cultivars; with the exception of lower protein content observed in cv. "Portola" (0.57 g/100 g ± 0.04; P < 0.05). Regarding the a * value of whole strawberry fruits, no significant differences ( P > 0.05) were found in any of the cultivars, which revealed a similar redness. The cv. "Endurance" revealed the highest bioactivity content compared to the other cultivars. Overall, these results provide important information about the high quality of strawberry produced in the western region of Portugal and may be used as a tool for adding value to a functional food in the Mediterranean diet due to the phytochemical composition and nutritional value of strawberry fruits.