Search

Introduction: Toxic heavy metal pollution has been considered a major ecosystem pollution source. Unceasing or rare performance of Pb2+ to the surrounding environment causes damage to the kidney, nervous, and liver systems. Microbial remediation has acquired prominence in recent decades due to its high efficiency, environment-friendliness, and cost-effectiveness. Methods: The lead biosorption by Bacillus subtilis was optimized by two successive paradigms, namely, a definitive screening design (DSD) and an artificial neural network (ANN), to maximize the sorption process. Results: Five physicochemical variables showed a significant influence (p < 0.05) on the Pb2+ biosorption with optimal levels of pH 6.1, temperature 30°C, glucose 1.5%, yeast extract 1.7%, and MgSO4.7H2O 0.2, resulting in a 96.12% removal rate. The Pb2+ biosorption mechanism using B. subtilis biomass was investigated by performing several analyses before and after Pb2+ biosorption. The maximum Pb2+ biosorption capacity of B. subtilis was 61.8 mg/g at a 0.3 g biosorbent dose, pH 6.0, temperature 30°C, and contact time 60 min. Langmuir's isotherm and pseudo-second-order model with R² of 0.991 and 0.999 were suitable for the biosorption data, predicting a monolayer adsorption and chemisorption mechanism, respectively. Discussion: The outcome of the present research seems to be a first attempt to apply intelligence paradigms in the optimization of low-cost Pb2+ biosorption using B. subtilis biomass, justifying their promising application for enhancing the removal efficiency of heavy metal ions using biosorbents from contaminated aqueous systems. [ABSTRACT FROM AUTHOR]

IntroductionToxic heavy metal pollution has been considered a major ecosystem pollution source. Unceasing or rare performance of Pb2+ to the surrounding environment causes damage to the kidney, nervous, and liver systems. Microbial remediation has acquired prominence in recent decades due to its high efficiency, environment-friendliness, and cost-effectiveness.MethodsThe lead biosorption by Bacillus subtilis was optimized by two successive paradigms, namely, a definitive screening design (DSD) and an artificial neural network (ANN), to maximize the sorption process.ResultsFive physicochemical variables showed a significant influence (p < 0.05) on the Pb2+ biosorption with optimal levels of pH 6.1, temperature 30°C, glucose 1.5%, yeast extract 1.7%, and MgSO4.7H2O 0.2, resulting in a 96.12% removal rate. The Pb2+ biosorption mechanism using B. subtilis biomass was investigated by performing several analyses before and after Pb2+ biosorption. The maximum Pb2+ biosorption capacity of B. subtilis was 61.8 mg/g at a 0.3 g biosorbent dose, pH 6.0, temperature 30°C, and contact time 60 min. Langmuir’s isotherm and pseudo-second-order model with R2 of 0.991 and 0.999 were suitable for the biosorption data, predicting a monolayer adsorption and chemisorption mechanism, respectively.DiscussionThe outcome of the present research seems to be a first attempt to apply intelligence paradigms in the optimization of low-cost Pb2+ biosorption using B. subtilis biomass, justifying their promising application for enhancing the removal efficiency of heavy metal ions using biosorbents from contaminated aqueous systems.

The definitive screening design (DSD) and artificial neural network (ANN) were conducted for modeling the biosorption of Co(II) by Pseudomonas alcaliphila NEWG-2. Factors such as peptone, incubation time, pH, glycerol, glucose, K2HPO4, and initial cobalt had a significant effect on the biosorption process. MgSO4 was the only insignificant factor. The DSD model was invalid and could not forecast the prediction of Co(II) removal, owing to the significant lack-of-fit (P < 0.0001). Decisively, the prediction ability of ANN was accurate with a prominent response for training (R2 = 0.9779) and validation (R2 = 0.9773) and lower errors. Applying the optimal levels of the tested variables obtained by the ANN model led to 96.32 ± 2.1% of cobalt bioremoval. During the biosorption process, Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy, and scanning electron microscopy confirmed the sorption of Co(II) ions by P. alcaliphila. FTIR indicated the appearance of a new stretching vibration band formed with Co(II) ions at wavenumbers of 562, 530, and 531 cm–1. The symmetric amino (NH2) binding was also formed due to Co(II) sorption. Interestingly, throughout the revision of publications so far, no attempt has been conducted to optimize the biosorption of Co(II) by P. alcaliphila via DSD or ANN paradigm. [ABSTRACT FROM AUTHOR]

The definitive screening design (DSD) and artificial neural network (ANN) were conducted for modeling the biosorption of Co(II) by Pseudomonas alcaliphila NEWG-2. Factors such as peptone, incubation time, pH, glycerol, glucose, K2HPO4, and initial cobalt had a significant effect on the biosorption process. MgSO4 was the only insignificant factor. The DSD model was invalid and could not forecast the prediction of Co(II) removal, owing to the significant lack-of-fit (P < 0.0001). Decisively, the prediction ability of ANN was accurate with a prominent response for training (R2 = 0.9779) and validation (R2 = 0.9773) and lower errors. Applying the optimal levels of the tested variables obtained by the ANN model led to 96.32 ± 2.1% of cobalt bioremoval. During the biosorption process, Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy, and scanning electron microscopy confirmed the sorption of Co(II) ions by P. alcaliphila. FTIR indicated the appearance of a new stretching vibration band formed with Co(II) ions at wavenumbers of 562, 530, and 531 cm–1. The symmetric amino (NH2) binding was also formed due to Co(II) sorption. Interestingly, throughout the revision of publications so far, no attempt has been conducted to optimize the biosorption of Co(II) by P. alcaliphila via DSD or ANN paradigm.

Introduction: Toxic heavy metal pollution has been considered a major ecosystem pollution source. Unceasing or rare performance of Pb 2+ to the surrounding environment causes damage to the kidney, nervous, and liver systems. Microbial remediation has acquired prominence in recent decades due to its high efficiency, environment-friendliness, and cost-effectiveness., Methods: The lead biosorption by Bacillus subtilis was optimized by two successive paradigms, namely, a definitive screening design (DSD) and an artificial neural network (ANN), to maximize the sorption process., Results: Five physicochemical variables showed a significant influence ( p < 0.05) on the Pb 2+ biosorption with optimal levels of pH 6.1, temperature 30°C, glucose 1.5%, yeast extract 1.7%, and MgSO 4 .7H 2 O 0.2, resulting in a 96.12% removal rate. The Pb 2+ biosorption mechanism using B. subtilis biomass was investigated by performing several analyses before and after Pb 2+ biosorption. The maximum Pb 2+ biosorption capacity of B. subtilis was 61.8 mg/g at a 0.3 g biosorbent dose, pH 6.0, temperature 30°C, and contact time 60 min. Langmuir's isotherm and pseudo-second-order model with R 2 of 0.991 and 0.999 were suitable for the biosorption data, predicting a monolayer adsorption and chemisorption mechanism, respectively., Discussion: The outcome of the present research seems to be a first attempt to apply intelligence paradigms in the optimization of low-cost Pb 2+ biosorption using B. subtilis biomass, justifying their promising application for enhancing the removal efficiency of heavy metal ions using biosorbents from contaminated aqueous systems., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 El-Sharkawy, Khairy, Abbas, Zaki and El-Hadary.)