Search

• The minimum release pressure for self-ignition is significantly higher. • The decrease of binary mixture self-ignition enhances with fuel molecular weight. • Nitrogen addition effectively inhibits flame development inside the tube. • Nitrogen-weaken ignited flame spouting from tube exit tends to blow out. • When self-ignition occurs, a partially premixed flame evolves first. This paper reports on the nitrogen addition effects on the self-ignition of high-pressure hydrogen leakage. It reveals that the intensity of produced incident shock decreases with more nitrogen addition, unbeneficial for self-ignition occurrence. Besides, nitrogen addition in hydrogen significantly reduces self-ignition possibilities inside the tube and self-sustained jet flame formation outside the tube. There exists a certain critical threshold of shock overpressure of about 1 MPa for self-ignition occurrence at different nitrogen additions. In our experiments, the impurity gases (N 2 , CO, CH 4) reduce the self-ignition possibilities in the same order as it reduces the shock intensity, namely, the effect of N 2 is similar to that of CO, larger than that of the same volume of CH 4. It suggests that the decrease of binary mixture self-ignition can be mostly explained by the reduction of shock intensity, and the decrease effect enhances with fuel molecular weight. Furthermore, nitrogen addition inhibits the flame development and propagation inside the tube. Nitrogen-weaken ignited flame barely survives during the expansion outside the tube or is soon extinguished inside the tube with more nitrogen addition. Moreover, the flame has a rapid flame length growth rate of 1–2 mm/μs in the initial stage, but the expanding velocity becomes lower to 0–1 mm/μs after a period of spread. Accordingly, a mechanism of the self-ignition process for high-pressure hydrogen release is proposed for cases with 0%-7.5% nitrogen addition. [ABSTRACT FROM AUTHOR]

• The critical pressure for ignition increases with methane addition concentration. • Methane addition can effectively inhibit flame development in the tube. • Three mechanisms of self-ignition for hydrogen with methane addition is proposed. • Hydrogen-methane flame spouting from tube exit tends to blow out. • The hydrogen-methane mixture brings greater combustion overpressure in chamber. In this paper, experimental investigations are carried out to study the effects of methane addition (2.5%, 5% and 7.5% vol.) on self-ignition and subsequent flame propagation of pressurized hydrogen release via a tube. The visualization method utilizing the high-speed direct photography and the measurements of pressure and light sensors are applied in this study. The result shows that the existence of methane can reduce the shock wave overpressure and the temperature of shock-heated air. Therefore, it has great effects on the self-ignition possibility. The minimum burst pressure required for self-ignition increases from 2.89 MPa (0% CH 4) up to 6.05 MPa (7.5% CH 4). Besides, methane addition can extremely reduce flame intensity and inhibit flame development inside the tube. Three possible self-ignition mechanisms for the hydrogen with methane addition are discussed. Under the effects of methane addition, hydrogen flame spouting from tube exit tends to blow out. In all cases with 7.5% methane addition, no self-sustained jet flame is formed outside the tube for burst pressure up to 10.0 MPa. When self-sustained flame is formed in a confined space, a great rise in overpressure is generated due to the intense combustion. It is suggested that more methane addition can reduce the self-ignition probability and the formation of self-sustained flame. However, with the increasing of CH 4 additions, once the jet fire is formed in a confined space, it may cause greater overpressure and thus bring greater casualties and property losses. [ABSTRACT FROM AUTHOR]

• Shock wave is temporarily weakened when the shock wave travels through obstacles. • Effects of obstacles in the tube on hydrogen self-ignition is investigated. • The further obstacles away from diaphragm, the more probability of flame enhancement. • Presence of obstacles in tube would only temporarily promote combustion inside tube. The spontaneous ignition and subsequent hydrogen combustion has become a great challenge for the safe use of hydrogen energy at high-pressure. The spontaneous ignition mechanism of high-pressure hydrogen in the tube with obstacles has still not fully understood. In this study, synchronization measurement was performed through simultaneous pressure and flame acquisition, and experiments of pressurized hydrogen sudden release through tubes with obstacles were conducted. Spontaneous ignition and subsequent hydrogen combustion were reproduced through varying initial burst pressure in different obstructed tubes, the presence of obstacles exhibit great influence on shock wave propagation and flame evolution inside the tube. The temporary weaken of shock wave strength caused by obstacles is not conducive for spontaneous ignition onset. At the contrary, the complex dynamic flow induced by obstacles facilitates the occurrence of the spontaneous ignition. The effect of obstacles on the spontaneous ignition onset can be further analyzed by the minimum burst pressure for spontaneous ignition. And it shows the effects of obstacles on spontaneous ignition onset depends on its comprehensive influences on the formation of hydrogen/air mixture and increment of temperature. Furthermore, locations of obstacles also play an essential role on spontaneous ignition onset and hydrogen combustion intensity inside tube. The pressure and flame dynamics evolution show that when increasing the distance between burst disk and obstacles, the obstacles exhibit less influence on the spontaneous ignition onset but temporarily enhance combustion inside tube. [ABSTRACT FROM AUTHOR]