Search

The electrospinning technique was used to prepare nanofibers samples consisting of three groups, each group has a different polystyrene concentration (12, 14, 16 wt.%). Multiwalled carbon nanotubes were added to each group with four ratios to yield four samples comprising (polystyrene/MWCNT) constituents. The UV-Visible test was carried out to know how uniformly nanofibers and Mutli-walled carbon nanotubes were distributed in the polymeric nanofibers and their effect on the final nanofiber's properties through the absorption peaks. The morphological test used "Field Emission Scanning Electron Microscope". The results showed that; MWCNTS has a dominant effect on prepared nanofibers in the (12 wt.% Polystyrene) group, and both (PS, MWCNT) have a shared effect, highest steady absorption curves, and uniformly scattered radiation at (14 wt.% PS) group, and random results at (16 wt.% PS) group. From FESEM results we notice that increasing polymer concentration causes an increase in the nanofiber's diameter and beads formation chance increases at (12,16 wt.% PS) groups. In the group of (14 wt.% Polystyrene), it produces nanofibers with free beads and uniform distribution, the addition of MWCNT lowers the diameter of nanofibers much more and enhances the orientation, and improves their UV absorption, strength, and mechanical properties. [ABSTRACT FROM AUTHOR]

Polymeric nanocomposites of polystyrene nanofibers and multiwall carbon nanotubes and natural pigment were synthesized using electrospinning technique the polystyrene concentration was 12 wt.% and multiwall carbon nanotube was added by (0, 100, 140, 200 ppm), and natural pigment added by two drops (0.063 g) to the prepared solutions and many tests were carried out to the prepared solutions and the final samples. The solution tests included viscosity test by using cone-plate viscometer and surface tension test using du-nouy ring method. The nano textiles tests included the Fourier transform infrared spectroscope (FTIR) test, Field emission scanning electron microscopy (FESEM) test, contact angle test, and ultraviolet test to extract the energy bandgap using (tauc plot) method. The tests results showed that the viscosity increased by increasing the multiwall carbon nanotube and natural pigment and surface tension slightly increased at a high ratio of 200 ppm of multiwall carbon nanotube and natural pigment and physical type of reaction between the components were confirmed through FTIR, and the addition of multiwall carbon nanotube and natural pigment makes the fibers smoother and fewer beads formation and increase the multiwall carbon nanotube addition made the samples more hydrophobic and the charts of tauc plot show that increasing the MWCNT with natural pigment addition will increase the electrical sensitivity of the prepared samples in which the energy band gap dropped from 1.18 ev to 0.2 ev for the sample of Polystyrene/200 ppm MWCNT/natural pigment this is regarded as an indication of using it as a typical electrical sensor. [ABSTRACT FROM AUTHOR]