Search

The Broader Approach (BA) activities aim to complement the ITER project and to promote the early realization of fusion energy through research, development, and tests of technologies supporting the future demonstration fusion reactor (DEMO). These activities are implemented under the BA agreement, which was signed and ratified in 2007 between Euratom and the Government of Japan. In essence, the BA activities consist of three projects: a) The Satellite Tokamak Programme Project JT-60SA, the world's largest superconducting tokamak until ITER starts, aims to support the assembly, commissioning and preliminary operation of ITER, and carry out demonstration and optimisation of steady-state operation of advanced plasma configurations for DEMO; b) The International Fusion Energy Research Centre (IFERC), which comprises three different sub-projects: the DEMO Design Research and Development Coordination Centre to coordinate design and R&D on materials and components for DEMO, the Fusion Computer Simulation Centre for the simulations of fusion plasmas, the analysis of experimental data, modelling of ITER operation, and contribution to the design of DEMO, and the Remote Experimentation Centre to allow scientists to participate remotely in fusion experiments from its control room in Japan; c) The Engineering Validation and Engineering Design Activities for the International Fusion Materials Irradiation Facility (IFMIF/EVEDA) focused on the design and validation of key components needed for the future Fusion Neutron Source facilities to characterize materials envisioned for DEMO. After 13 years of fruitful collaboration, Euratom and Japan launched the second phase of the BA activities in 2020. It is focused on exploiting and enhancing the facilities that have already been built and on working more closely than ever with ITER as the latter advances towards the first plasma. This paper will present a synthesis of the achievements already obtained thanks to the three BA projects and will address the future developments planned in 2023 and beyond. [ABSTRACT FROM AUTHOR]

In a fusion reactor, the plasma based on a deuterium-tritium reaction generates high energy neutron flux interacting with the materials of the plasma facing components. In order to study the irradiated behavior of these materials, the International Fusion Materials Irradiation Facility (IFMIF) was conceived to generate these fusion relevant neutrons through d -Li stripping source. IFMIF is presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the Broader Approach agreement signed between EURATOM and Japanese Government in 2007. This agreement mandates the IFMIF/EVEDA project to validate the design of the different systems of IFMIF and to produce an integrated engineering design of IFMIF, together with the data necessary for future decisions on its construction and operation. While the Engineering Validation Activity (EVA) of the Lithium Target Facility and the Test Facility was completed by constructing prototypes, the EVA of the Accelerator Facility with the Linear IFMIF Prototype Accelerator (LIPAc) is still on-going at the Rokkasho Fusion Institute, Japan. This paper overviews the achievements in the previous phase ended on 31 March 2020 and the progress in the current phase to complete the commissioning of the LIPAc. [ABSTRACT FROM AUTHOR]

In 2013, the IFMIF, the International Fusion Material Irradiation Facility, presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase, framed by the Broader Approach Agreement between Japan and EURATOM, accomplished in 2013 its mandate to provide the engineering design of the plant on schedule [1] . The IFMIF aims to qualify and characterize materials that are capable of withstanding the intense neutron flux originated in D-T reactions of future fusion reactors due to a neutron flux with a broad peak at 14 MeV, which is able to provide >20 dpa/fpy on small specimens in this EVEDA phase. The successful operation of such a challenging plant demands a careful assessment of the Conventional Facilities (CF), which have adequate redundancies to allow for the target plant availability [2] . The present paper addresses the design proposed in the IFMIF Intermediate Engineering Design Report regarding the CF, particularly the IFMIF's Nuclear and Industrial HVAC design. A preliminary feasibility study, including the initial configuration, calculations and reliability/availability analysis, were performed. The nuclear HVAC design was developed progressively; first, by establishing a conceptual design, starting from the system functional description, followed by the identification of the corresponding interfacing systems and their technical requirements. Once the technical requirements were identified, safety zones were identified based on the radiation classification, frequency dose and parameter of Derivate Air Contamination (DAC). The zone color was determined to match the room's radiation classification. The system design was further developed by defining and creating a Block Diagram with basic and additional information, eventually resulting in a Process Flow Diagram concurrent with the equipment layout definition. Subsequently, we studied and developed the various Piping & instrumentation diagrams (P&ID's), air duct layout and equipment list for different air handling units, air ducting as well as a layout plan of the equipment piping, which was eventually integrated into the 3D model of the building and coordinated with others subsystems of the IFMIF. [ABSTRACT FROM AUTHOR]