Search

Archie's parameters are substantial to be investigated in the evaluation of water saturation. Many researchers adhered to the opinion that Archie's equation can still be applied to water saturation calculation in shale if the accuracy of relative parameters could be improved. External conditions, such as temperature, confining pressure, water salinity, wettability, and displacement, may influence the determination of Archie's parameters. The aim of the study is to investigate the effect of salinity on Archie's parameters and their correlation with mineral composition and pore structure. The mineral contents and petrophysical properties were firstly acquired through X-ray diffraction (XRD) and basic measurements. Rock-electric experiments under different salinity were conducted on deep shale samples taken from Longmaxi (LMX) Formation in Luzhou (LZ). The results indicate that Archie's parameters of " a ," " b ," " m ," and " n " under actual brine salinity are assigned to 1.47, 1, 1.26, and 1.6, respectively. Our cementation factor is lower than that in other studies including (shaly) sandstones, carbonates, and shales, probably due to the extremely low porosity in study area. Salinity has a positive effect on cementation factor (m) and saturation exponent (n), suggesting the traditional assignment to Archie's parameters is inappropriate. It was concluded that the complicated pore structure and high porosity mainly associated with clay mineral may trigger the increased cementation factor. Further mathematical derivations confirmed that the rock resistivity is inextricable from pore system and establish a physical model. The paper provides a solid evidence base for further understanding and evaluation of water saturation in unconventional shale reservoirs, more significantly, innovatively unveils the research into Archie formula in deep shale reservoirs of southern Sichuan basin. [ABSTRACT FROM AUTHOR]

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]