Search

This study focuses on analyzing and monitoring urban subsidence, particularly in the city of Palermo, Italy. Land subsidence, induced by natural and human factors, poses threats to infrastructure and urban safety. Remote sensing (RS), specifically synthetic-aperture radar interferometry (In-SAR), is employed due to its ability to detect ground displacements over large areas with great precision. The persistent scatterer InSAR (PS-InSAR) technique is utilized to identify stable targets and track millimeter-level surface deformations. This research spans from October 2014 to October 2021, using Sentinel-1 satellite data to capture ground deformation from various angles. The findings are integrated into an accessible web app (ArcGIS) for local authorities that could be used aiding in urban planning and enhancing safety measures. This study's results offer updated deformation maps, serving as an operational tool to support decision-making and community resilience, emphasizing risk awareness and responsible practices. This study highlights that the exponential expansion of urban areas, which does not take into account historical information, can gravely jeopardize both the integrity of urban infrastructure and the well-being of its inhabitants. In this context, remote sensing technologies emerge as an invaluable ally, used in monitoring and safeguarding the urban landscape. [ABSTRACT FROM AUTHOR]

Subsurface imaging in arid regions is a well-known application of satellite Synthetic Aperture Radar (SAR). Archaeological prospection has often focused on L-band SAR sensors, given the ability of longer wavelengths to penetrate more deeply into sand. In contrast, this study demonstrates capabilities of shorter-wavelength, but higher spatial resolution, C-band and X-band SAR sensors in archaeological subsurface imaging at the site of 'Uqdat al-Bakrah (Safah), Oman. Despite having varying parameters and acquisitions, both the X-band and C-band images analyzed were able to identify a subsurface paleo-channel that is not visible on the ground surface. This feature was first identified through Ground Penetrating Radar (GPR) survey, then recognized in the SAR imagery and further verified by test excavations. Both the GPR and the excavations reveal the base of the paleo-channel at a depth of 0.6 m-0.7 m. Hence, both X-band and C-band wavelengths are appropriate for subsurface archaeological prospection in suitable (dry silt and sand) conditions with specific acquisition parameters. Moreover, these results offer important new insights into the paleo-environmental context of ancient metal-working at 'Uqdat al-Bakrah and demonstrate surface water flow roughly contemporary with the site's occupation. [ABSTRACT FROM AUTHOR]

We study the surface deformation following a moderate size M5+ earthquake sequence that occurred close to Tyrnavos village (Thessaly, Greece) in March 2021. We adopt the interferometric synthetic aperture radar (InSAR) technique to exploit several pairs of Sentinel-1 acquisitions and successfully retrieve the ground movement caused by the three major events (M5+) of the sequence. The mainshocks occurred at depths varying from ~7 to ~10 km, and are related to the activation of at least three normal faults characterizing the area previously unknown. Thanks to the 6-day repeat time of the Sentinel-1 mission, InSAR analysis allowed us to detect both the surface displacement due to the individual analyzed earthquakes and the cumulative displacement caused by the entire seismic sequence. Especially in the case of a seismic sequence that occurs over a very short time span, it is quite uncommon to be able to separate the surface effects ascribable to the mainshock and the major aftershocks because the time frequency of radar satellite acquisitions often hamper the temporal separation of such events. In this work, we present the results obtained through the InSAR data analysis, and are able to isolate single seismic events that were part of the sequence. [ABSTRACT FROM AUTHOR]

We identify the source of the Mw = 5.6 earthquake that hit west-central Epirus on 21 March 2020 00:49:52 UTC. We use Sentinel-1 synthetic aperture radar interferograms tied to one permanent Global Navigation Satellite System (GNSS) station (GARD). We model the source by inverting the INSAR displacement data. The inversion model suggests a shallow source on a low-angle fault (39°) dipping towards east with a centroid depth of 8.5 km. The seismic moment deduced from our model agrees with those of the published seismic moment tensors. This geometry is compatible with reverse-slip motion along the west-verging Margariti thrust fault that accommodates part of the convergence within the collision zone between Apulia and Eurasia. We also processed new GNSS data and estimate a total convergence rate between Apulia and Eurasia of 8.9 mm yr−1, of which the shortening of the crust between the Epirus coastal GNSS stations and station PAXO in the Ionian Sea (across the Ionian Thrust) is equivalent to ~50% of it or 4.6 mm yr−1. By back-slip modelling we found that a 60-km wide deformation zone takes up nearly most of the convergence between Apulia-Eurasia, trending N318°E. Its central axis runs along the southwest coast of Corfu, along the northeast coast of Paxoi, heading toward the northern extremity of the Lefkada island. The island of Paxoi appears kinematically as part of the Apulian plate. [ABSTRACT FROM AUTHOR]

We identify the source of the Mw = 6.4 earthquake that rocked north-central Albania on November 26, 2019 02:54 UTC. We use synthetic aperture radar interferograms tied to the time series of coordinates of two permanent Global Navigation Satellite System (GNSS) stations (DUR2 and TIR2). We model the source by inverting the displacement data. Assuming in our model a half-space elastic medium and uniform slip along a rectangular fault surface, we invert the 104 picked measurements on a couple of ascending and descending interferograms to calculate the parameters of the fault. All inversions made with different input parameters converge towards a stable and robust solution with root mean square (r.m.s.) residual of 5.4 mm, thus ~1/5 of a fringe. They reveal that the earthquake occurred deep in the crust on a low-angle fault (23°) dipping towards east with a centroid at 16.5 km depth. The best-fitting length and width of the fault are 22 and 13 km, and the reverse slip, 0.55 m. The seismic moment deduced from our model agrees with those of the published seismic moment tensors. This geometry is compatible with a blind thrust fault that may root on the main basal thrust, i.e., along the thrust front that separates Adria–Apulia from Eurasia. It is notable that there is a 123 ns yr−1 active shortening of the crust between the GNSS stations DUR2-TIR2 (equivalent to a shortening rate of 3.6 mm yr−1), and roughly in the east–west direction. Given this amount of strain the recurrence time of M6+ earthquakes along this fault should be of the order of 150 years. [ABSTRACT FROM AUTHOR]