Search

In this paper, the 24 karat (99.99 wt.% pure) and 22 karat gold (Au-5.8wt.%Cu-2.5wt.%Ag) were grain refined with Au-6wt.%Ti master alloy and the mechanism of grain refinement was studied. The Au-6wt.%Ti master alloy containing Au2Ti and Au4Ti intermetallic particles was added into 24 karat and 22 karat gold at various addition levels of Ti (0.1, 0.2 and 0.3 wt.%) for grain refinement. The intermetallic particles undergo peritectic reaction with liquid Au in sequence to nucleate α-Au solid. It is observed that both the 24 karat gold and 22 karat gold showed efficient grain refinement at the lowest addition level of Ti (0.1 wt.%). However, 22 karat showed better grain-refining efficiency than 24 karat at all addition level of Ti studied. The mechanism of grain refinement of gold in this study matches with the “Peritectic theory” and “Solute paradigm” proposed for the grain refinement of aluminium. It is also observed that increasing the master alloy addition level to 0.2 and 0.3 wt.% Ti coarsening in the grain size in both 24 karat and 22 karat, but significant in the case of 24 karat gold due to recalescence effect. The grain-refined 24 karat and 22 karat gold at 0.1 wt.% Ti showed improvement in the hardness in comparison to the un-grain refined one.

The electrochemical corrosion behaviour of 22k gold (Au-5.8wt.%Cu-2.5wt.%Ag) and Ti containing 22k (Ti-22k) gold (Au-5.8wt.%Cu-2.0wt.%Ag-0.5wt.%Ti) was studied. Elemental Ti was added as the quaternary element to 22k gold by replacing Ag, resulting in the formation of secondary phase precipitates during age hardening treatment, thereby improving the hardness of the alloy. Anodic polarization tests were conducted for both 22k and Ti-22k samples in their as-cast annealed, cold-rolled annealed and age-hardened conditions using 0.9% sodium chloride and 1% lactic acid as medium. The as-cast and annealed 22k samples showed better corrosion resistance in both corrosion media whereas the 22k samples in the cold-rolled, annealed condition and Ti-22k samples in the as-cast, annealed condition showed poor corrosion resistance. After age-hardening treatment, cold-rolled Ti-22k samples showed better corrosion resistance due to the formation of passive layer (of TiO2) on the surface. However, corrosion gets initiated in the age-hardened Ti-22k due to the breaking and decomposition of the passive layer (TiO2) at a potential > 1.3 V.