Search

Oceanography and limnology projects often require the collection of water samples for chemical analysis. Manual water sample collection is labor-intensive and often difficult, especially in remote locations or during nighttime hours. Here we describe a compact and inexpensive autonomous submersible multiport water sampler (AutoSampler) that is largely fabricated with off-the-shelf parts making it easier to build and maintain. The system can collect up to 12 discrete samples at user controllable times or intervals and is operated using open source Arduino hardware and software that can be user modified to meet deployment requirements. While the underwater pressure housing presented here is custom built from readily available materials, there are many commercially available pressure case options that can be used as a substitute. The electronic mounting plates and battery pack are designed so that they can easily be adapted to fit into other pressure case housings. Samples can be collected into bags or syringes and sample volume is set by adjusting how long the peristaltic pump is actuated. This AutoSampler allows research that would otherwise be too labor-intensive or logistically difficult to conduct, especially in remote locations.

We present an inexpensive autonomous underwater pumping system that is lightweight, compact, independent, and versatile, making it easy to deploy in a multitude of settings. This system can be used to pump water into discrete and flow-through sensor systems. With the exception of the custom built pressure case housing, this system can be fabricated with off-the-shelf parts, making it easier to maintain. This system uses open source Arduino software code for easier customization and operations. The electronics and battery pack used to power this system can be adapted to fit into commercially available pressure case housings.

Flow-through systems are often used in aquarium and aquaculture facilities, laboratories, and aboard research vessels and other mobile systems to collect, analyze, and monitor water properties as they vary across time and location. These systems most often intake water from a single source and deliver it to a suite of flow-through sensors after which waste water either exits the system or is recirculated back to the source. Here we describe a system that is designed to take water from multiple sources via a multiport valve manifold and deliver it to a common sample stream, facilitating analysis by a single suite of flow-through and probe type sensors. Build cost depends on the manifold design and the number of valves, but generally under $9000. The inclusion of a Free Surface Interface Cup (FSIC) allows probe type sensors or sample “sippers” that require unpressurized conditions to be utilized down-stream of the pumping system and manifold. With the exception of the multiport sampling manifold, all components of this system are available off-the-shelf, simplifying construction, service, and maintenance. The operating system code is open source and based on the Arduino platform, enabling users to customize the code to better fit their requirements.