Search

Abstract Paper bookbindings have been disregarded for centuries by scholars since they were only considered temporary covering materials for manuscripts and books. Recently, there is a willingness to reconsider these bindings and to evaluate their role. Thanks to the collaboration with the Marciana National Library in Venice, which stores an impressive collection of 849 detached bindings, the current research provides a chemical-physical elucidation about the composition and the manufacture of paper bookbindings realized between the 16th and the eighteenth century in the Venetian area. A selection of bookbindings was analysed by the means of complementary methods (thickness measurements, Attenuated Total Reflection—Fourier-Transform Infrared Spectroscopy (ATR-FTIR), Pyrolysis–Gas Chromatography–Mass Spectrometry (Py-GC–MS) and X-Ray Fluorescence (XRF)). Data evidence the presence of cellulose as the main component of paper pulp; hemicellulose and lignin were identified too, probably related to the presence of linen/hemp rags in the paper production. Gelatine was detected muck likely related to paper sizing; among inorganic additives CaCO3 was found in all samples. The presence of waxy material may be due to past undocumented conservation treatments.

Abstract In the process of conservation mounting, starch paste made from wheat flour is the glue of choice to paste reinforcing strips and backing papers, often Xuan paper, for mending and decorating aged and damaged paper-based Chinese artworks. To keep objects intact and select appropriate conservation materials, this research explored the applicability of near-infrared (NIR) spectroscopy coupled with multivariate analysis for the characterization of contemporary unsized Xuan paper with and without starch. In particular, partial least squares (PLS) regression was used to predict the degree of polymerization (DP) of the paper, i.e., one of the most important properties of paper materials, and principal component analysis (PCA) was used to detect starch and to distinguish between papers with different amounts of starch. Using 12 contemporary unsized Xuan papers, the NIR-PLS method for DP prediction was validated, and the best-performed model was generated using the logarithmic transformation of DP−1 as a response variable, with root mean square error of prediction (RMSEP) of DP 128. The NIR-PCA method was also found to be applicable to separate starch-free papers and papers treated with starch, and the results indicate that the higher the content of starch, the better PCA classification performs. This research provides supporting data for the non-destructive characterization of Xuan paper-based objects and differentiates between Xuan paper before and after treatment with starch.

Abstract Purpose Paper-based artifacts hold significant cultural and social values. However, paper is intrinsically fragile to microorganisms, such as mold, due to its cellulose composition, which can serve as a microorganisms’ nutrient source. Mold not only can damage papers’ structural integrity and pose significant challenges to conservation works but also may subject individuals attending the contaminated artifacts to health risks. Current approaches for strain identification usually require extensive training, prolonged time for analysis, expensive operation costs, and higher risks of secondary damage due to sampling. Thus, in current conservation practices with mold-contaminated artifacts, little pre-screening or strain identification was performed before mold removal, and the cleaning techniques are usually broad-spectrum rather than strain-specific. With deep learning showing promising applications across various domains, this study investigated the feasibility of using a convolutional neural network (CNN) for fast in-situ recognition and classification of mold on paper. Methods Molds were first non-invasively sampled from ancient Xuan Paper-based Chinese books from the Qing and Ming dynasties. Strains were identified using molecular biology methods and the four most prevalent strains were inoculated on Xuan paper to create mockups for image collection. Microscopic images of the molds as well as their stains situated on paper were collected using a compound microscope and commercial microscope lens for cell phone cameras, which were then used for training CNN models with a transfer learning scheme to perform the classification of mold. To enable involvement and contribution from the research community, a web interface that actuates the process while providing interactive features for users to learn about the information of the classified strain was constructed. Moreover, a feedback functionality in the web interface was embedded for catching potential classification errors, adding additional training images, or introducing new strains, all to refine the generalizability and robustness of the model. Results & Conclusion In the study, we have constructed a suite of high-confidence classification CNN models for the diagnostic process for mold contamination in conservation. At the same time, a web interface was constructed that allows recurrently refining the model with human feedback through engaging the research community. Overall, the proposed framework opens new avenues for effective and timely identification of mold, thus enabling proactive and targeted mold remediation strategies in conservation.

Abstract Gels prepared from the polysaccharide gellan are used for aqueous poulticing treatments in paper conservation when the application of water must be restricted. Optimal use of the rigid, yet shapeable gel requires direct contact with the paper surface, which carries the risk of gel residues on the treated surface. We used acid methanolysis as a destructive analytical method to detect rhamnose as a component of gellan, which was undetectable with ATR-FTIR spectroscopy. We show that there is a significant probability of leaving gellan residues on the paper. Conservators should be aware of this potential side effect when considering the use of gellan poultices in direct contact with paper objects.

Abstract Soot stain from diverse sources is the most common stain that stains historical paper documents found in libraries, museums, and storage facilities. It is believed to be one of the types of deterioration that arises from the contact between stains and paper sheets. Therefore, in the present work, the effectiveness of the synthesized hybrid nanogel consisting of carbopol and nanoparticles (NPs) of ZnO, TiO2, or Fe3O4, in low and high-viscosity forms, for eliminating soot stains from historical paper manuscripts was conducted. The prepared hybrid nanogels were characterized utilizing the TEM, AFM, XRD, DLS, and Zeta Potential techniques. Following preparation, the soot-stained paper samples were heated to 105 °C for 6 days, a process known as accelerated thermal aging. Surface morphology, mechanical properties and the color change of the paper samples were investigated. The prepared hybrid nanogel had a spherical shape with well-defined edges and uniform size, with an average particle diameter ranging from 30 to 35 nm. There was no significant NPs agglomeration seen, suggesting uniform dispersion in the carbopol matrix. Additionally, the prepared gels' crystal structure and phase purity were revealed by the XRD analysis results. Paper fibers were visible in some parts of the treated sample with TiO2/carbopol hybrid nanogel at high-viscosity before aging. Cleaning soot-stained paper samples using high-viscosity Fe3O4/carbopol hybrid nanogel is more successful than using low-viscosity nanogel. the sample treated with high-viscosity ZnONPs/carbopol hybrid nanogel produced the highest total color differences (ΔE) (26.17). The paper sample treated with high-viscosity ZnO/carbopol hybrid nanogel exhibited the maximum tensile strength (61.8 N/mm2) and elongation at break (1.174%). The evaluation of the paper samples both before and after the cleaning process revealed that, the treatment with high-viscosity ZnO/carbopol hybrid nanogel gave the best results in removing soot stains from stained paper samples.

Abstract Numerous natural dyes were used to dye mediaeval Islamic paper from the tenth to the nineteenth century, using a variety of techniques. The objective of this research is to develop an analytical method using high performance liquid chromatography with diode array detection (HPLC–DAD) to identify natural dyes in forty historical Islamic paper manuscripts from two collections. In addition, novel information was obtained from original treatises containing recipes for dyeing paper and the chronological use of dyes in dyeing mediaeval Islamic paper between the tenth and seventeenth centuries. The results show that thirty-four of the forty manuscripts examined contained dyes. Six natural dyes were detected, including henna, madder, lac, safflower, turmeric, and weld. This is the first study aimed at developing a method for determining various natural dyes in Islamic paper from a wide historical and geographical range in the mediaeval time and to fill significant gaps in the technical and historical knowledge of papermaking.

Abstract Some ancient Chinese paper artifacts dyed with amur cork tree bark extracts are currently preserved to different extents in museums and libraries worldwide. As traditional natural plant dyes, the long-term performance of the amur cork tree bark extract-dyed handmade paper has been questioned under a preserved environment. The photodegradation process of the extract-dyed papers was examined under accelerating artificial UVA irradiation conditions according to China national standard-paper and board- accelerated aging (exposure to light). Changes during aging were analyzed by optical observation and scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), pH, and tensile strength and folding endurance tests. The results showed that the main components from extracted dyes played an important role in affecting the photodegradation properties of dyed paper. The changes in surface color, pH, morphology and mechanical properties after the artificial UVA accelerated degradation tests revealed that a suitable concentration of the extract dyes for maintaining the long-term irradiation stability of the paper is important.

Abstract Efficient removal of mold stains becomes an important research topic for paper conservation. In this study, a cleaning scheme based on the combination of bioenzymes and biosurfactants was explored. Morphological and molecular biology identifications were first jointly applied to identify the dominant strains sampled from five ancient books that are stored in the same environment. Cellulolytic experiments were then conducted to evaluate the cellulose degradation ability of the strains according to the cellulolytic digestive index. Finally, paper Mockups for the ancient books were constructed to investigate the most effective combination of bioenzymes and biosurfactants in removing mold stains as well as its effect on the paper’s physical properties. The result concluded that the combination of 3% papain, 7% of sophorolipid or 7% of betaine, and distilled water, achieved optimal stain removal effect with over 50% cleaning rate at 35 °C, after 30 min of infiltration. The maximum color difference of the paper material after cleaning was around 0.60, pH was between 7.45 and 7.79, and no significant changes in tensile strength were observed. At the same time, Sophorolipid and Betaine both have superior deacidification, anti-acidification, anti-aging, and reinforcement capabilities, which can provide extra support to the fibrous structure in addition to cleaning the paper materials. The microbial contamination cleaning agent proposed in this study shows promising application prospects in conserving mold-contaminated paper artifacts.

Abstract Traditional papermaking was a significant innovation that intrigued the information-sharing society in a wide range of the globe. The importance of finding the historical background hidden behind the historical traditional paper is critical to understanding societies in history. Advanced molecular biological research is applied to many forensic studies to identify the origin and criminal events. Yet, biological research refrained from the heritage science of traditional papers due to its damage to the samples. The current study explores the Pearson correlation between DNA in traditional paper and non-destructive measurement of characteristics of traditional paper. DNA concentration and purity were found to have a proportional relationship based on the CIEL*a*b* color system. The color of the traditional paper was assessed assessment shows green and yellow rather than red and blue. The DNA concentration demonstrated a positive linear correlation with the peaks of 992 cm−1, 1599 cm−1, and 1628 to 1638 cm−1 region, which were lignin-specific functional groups. The presence of lignin in traditional paper defines the colors green and yellow, which is related to the presence of a cell wall. The quantity of cell walls present is linked to DNA survival during the traditional papermaking process. Furthermore, the partial least square (PLS) regression model is established. The prediction model based on DNA, paper properties, and smoothing + the second derivative preprocessed attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectral data demonstrated valid purity predictions. The evaluation parameter of the cross-validated prediction model contains a low Root Mean Square Error of Cross-Validation (RMSECV) of 0.091 for DNA purity. The determination coefficient was close to 1. However, the further establishment of a validated DNA extraction methodology is required for the consistency of the prediction model for DNA concentration. The hierarchical clustering analysis demonstrated the agglomerative dendrogram on traditional paper samples. For the dendrogram, the Nasu paper mulberry (originating in northern Japan) was distinguished from another paper mulberry (originating in southwestern Japan) by clustering. By multivariate statistical analysis, the DNA presence and quality were predictable from the Japanese traditional papers. In addition, the clustering analysis provided the possible origin of paper mulberry materials for traditional papers. Based on the preliminary information, the need for DNA analysis on historical traditional paper can be determined.

Abstract There are many paper manuscripts at museums, stores, and libraries that have different stains. The dust stains and soil remains played an important role in the degradation of these manuscripts. Therefore, the cleaning process for these stains is important to process. Unfortunately, the removal of stains by some traditional techniques can be hazardous to the paper's fibers. Therefore, this study aims to evaluate innovative nanoparticle gels in the cleaning process of dust stains from paper manuscripts. The synthesized nanomaterials [Fe3O4, TiO2, and ZnO]/Carbopol hybrid nanogel were examined in order to investigate the surface morphology, determine the physio-chemical properties, for phase structure, using scanning electron microscope (SEM), transmission electron microscope (TEM), AFM, DLS, XRD, and Zeta potential. Some stained paper samples were prepared and exposed to accelerated thermal aging at 100 °C for 72 h. The evaluation of the cleaning by nanogel was performed by different analytical procedures containing investigation with a USB digital microscope, SEM, color change, mechanical properties, and ATR-FTIR analysis. The results of this study showed that ZnO/Carbopol hybrid nanogel at high viscosity gave the best results in the cleaning process of mud stains through the ability to dismantle mud particles and increase surface contact with the solvent. The aged treated sample with high viscosity form of ZnO NPs/carbopol hybrid nanogel gave the highest tensile strength value of (56.0 N). The treated samples with the high viscosity form of ZnO NPs/carbopol hybrid nanogel gave the highest value of elongation (1.398%) before aging. It also does not affect the chemical composition of the paper after cleaning it, but rather on the whole, it bites the hydration of the paper, which positively affects the properties of the treated paper.

Abstract Medieval paper, a handmade product, is made with a mould which leaves an indelible imprint on the sheet of paper. This imprint includes chain lines, laid lines and watermarks which are often visible on the sheet. Extracting these features allows the identification of the paper stock and gives information about the chronology, localisation and movement of manuscripts and people. Most computational work for feature extraction of paper analysis has so far focused on radiography or transmitted light images. While these imaging methods provide clear visualisation of the features of interest, they are expensive and time consuming in their acquisition and not feasible for smaller institutions. However, reflected light images of medieval paper manuscripts are abundant and possibly cheaper in their acquisition. In this paper, we propose algorithms to detect and extract the laid and chain lines from reflected light images. We tackle the main drawback of reflected light images, that is, the low contrast attenuation of chain and laid lines and intensity jumps due to noise and degradation, by employing the spectral total variation decomposition and develop methods for subsequent chain and laid line extraction. Our results clearly demonstrate the feasibility of using reflected light images in paper analysis. This work enables feature extraction for paper manuscripts that have otherwise not been analysed due to a lack of appropriate images. We also open the door for paper stock identification at scale.

Abstract Microorganisms, especially microscopic filamentous fungi, represent one of the most significant factors influencing the degradation of cultural heritage cellulosic objects. Early detection, identification and characterisation of microbial communities can help select a suitable conservation intervention and, in addition, allow possible control of its effectiveness. A combination of spectral methods and statistical data processing appears to be a suitable alternative to conventional methods for monitoring microbial contamination. The main goal of the presented research was the investigation of the spectral properties of vital and devitalised filamentous fungi Alternaria alternata, Aspergillus niger, Cladosporium herbarum, Penicillium chrysogenum, and Trichoderma atroviride, inoculated on a paper substrate Whatman in two phases—dormant (conidia) and active (mycelium). The combination of the UV-Vis-NIR and NIR Fibre Optics Reflection Spectroscopy (FORS) with the Principal Component Analysis (PCA) was set to determine whether the spectra of vital and devitalised forms of studied samples differ. The obtained results prove differences between the spectra of vital and devitalised forms of filamentous fungi, at least in one studied spectral region. Therefore, UV-Vis-NIR and NIR FORS combined with PCA seems to be a promising tool for monitoring paper-based objects' microbial contamination.

Abstract In paper degradation studies, the viscosity-average degree of polymerisation (DPv) is often used as a key indicator of the extent of degradation of cellulosic paper. DPv can be deduced from the viscosity of dilute paper solutions, as typically measured through glass capillary viscometry. The current study proposes an efficient, alternative method to evaluate DPv of cellulosic paper, which is based on rotational rheometry. The proposed methodology relies on the application of a shear flow in a thin film of cellulose solution to measure its dynamic viscosity, from which DPv can be subsequently derived in a straightforward fashion. Rheometry allows to measure the viscosity for a range of shear rates, which results in multiple DPv evaluations per sample, and thus in statistically representative data from an individual test. Further, rheometry typically requires considerably less paper mass per test than glass capillary viscometry, which makes the method attractive for paper degradation studies with limited sample availability. Also, rheometry measurements are less work-intensive than glass capillary viscometry measurements. The rheometry method has been applied to 4 hygrothermally aged cellulose paper samples and the unaged counterpart. The measurement results regarding the age-dependency of DPv and the number of cellulose chain scissions are compared to those obtained by glass capillary viscometry, showing a very good agreement. At a longer ageing time, both experimental methods reveal a non-linear decrease in time of DPv, and a non-linear increase in time of the number of cellulose chain scissions, which indicate that the cellulose ageing process is realistically captured. The agreement in measurement results further demonstrates that rheometry is an easy-to-use, accurate and efficient alternative for DPv measurements by glass capillary viscometry.

Abstract Extracts from amur cork tree barks contain some of the most important traditional natural dyes used, especially for functional production in ancient Chinese papers, due to religious reasons and their aesthetic aspects and antibacterial properties. Some ancient paper artefacts, dyed with this colourant and scattered around the world, are currently preserved to different extents. This study aims to characterize the thermal degradation process of amur cork tree bark extracts dyed papers to improve the knowledge and effectiveness of restoration practices. The properties of extracts dyed papers treated under dry-heat accelerating ageing conditions were investigated via optical observation and scanning electron microscopy as well as with pH, tensile strength and folding endurance analyses. The results showed that the main components from extracted dyes played important roles in affecting the properties of dyed paper. The changes in surface colour, pH, morphology and mechanical properties after the artificial dry-heat ageing tests revealed the most suitable concentration of extract dyes for maintaining the long-term thermal stability of the paper.

Abstract The Alessandrina Library was founded in 1667 by pope Alexander VII Chigi and is nowadays housed in the Campus of Sapienza University of Rome (Italy). Within its Ancient (mostly made of rag paper) and Modern (mostly made of contemporary paper) collections, it includes more than one million books produced from the XVI to the XXI century. In 2019, six thermo-hygrometers were deployed in its multi-storey repository to monitor temperature (T) and relative humidity (RH). Hourly T and RH data collected over 2 years allowed us to evaluate spatial and temporal thermo-hygrometric distributions and to carry out a comprehensive assessment of the climate-induced risks (mechanical, chemical, and biological deterioration mechanisms). Vertical temperature gradients associated with unstable conditions occurred in winter, resulting in upraising air flows up to the ceiling. The risky short-term RH fluctuations (EN 15757:2010) were determined to avoid mechanical stress in case of loans, relocation, and consultation. The Time Weighted Expected Lifetime (TWEL) index was used to evaluate the chemical risk for different paper-based collections as a function of their acidity and degree of polymerisation, also considering the typical response time of paper books to T and RH changes. The TWEL calculation estimated that the durability of acidic paper was around 300 years and highlighted that rag paper could be subject to cellulose hydrolysis only in summer and autumn, while contemporary paper was mostly at no risk. The risk of mould germination (Sedlbauer diagram) was possible on few days in Autumn, while the production of insect eggs (Brimblecombe empirical function) was favoured during approximately 42% of time over the year. In addition, illuminance and colorimetric measurements (performed on selected book covers) showed that light-sensitive objects could be exposed to the photodeterioration risk in the east-facing side of the repository. Although the investigation focussed on a specific case study, a similar approach could be effectively adapted to most library and archival repositories conserving paper-based collections.

Abstract This study applied various scientific analyses to one fragment of paper and three pigments excavated from earthenware found in the Hoeamsa Temple site at Yangju, Korea, which is believed to have been built in the early twelfth century. Radiocarbon dating of the paper fragment suggests a manufacture date between 1460 and 1646 (at a 95% confidence interval). It was estimated to have been used during the early and middle period of the Joseon dynasty (1391–1776), when the Hoeamsa Temple site was rebuilt. In addition, by staining the fiber of the paper fragment with Graff “C” stain, the paper’s raw material was identified as paper mulberry through dislocation, cross-marking, and transparent membrane, which are characteristics of the bast fiber. Efforts were made to identify their material properties and manufacturing techniques of the three types of pigments. Color difference analysis was performed by distributing the pigments in large areas to reveal characteristic differences according to the color difference of the pigment. We found that green-type pigments are malachite and atacamite, red-type pigments are hematite based on the element Fe, and white-type pigments are quartz and muscovite based on the elements Si and Al. In addition, as the size distribution of the three types of pigments is wide and has a multi-peak distribution curve, it was concluded that the pigments were used without purification.

Abstract The cleaning of particles from smooth and rough paper surfaces using a high-speed CO2 snow jet was investigated. The measurements included characterization of the jet properties, determination of the cleaning efficiency, and evaluation of any possible adverse effects. The method was compared with nitrogen jet cleaning and dry cleaning by commercial materials. The results showed that the CO2 snow jet is able to effectively remove particles from the paper surface and did not cause any observable degradation. The CO2 snow jet cleaning compared with the mechanical dry cleaning showed similar effectiveness without any adverse effects on the paper surface. It was proved that the CO2 snow technique is a suitable method for cleaning common types of paper materials.

Abstract Once printed, books are always accompanied by the smells of volatile organic compounds (VOCs) which are continuously emitted not only by inks but also by papers themselves throughout their lives. Although the VOCs from papers may bring mild discomfort to readers, they are considered as very important factors that feature the degradation of papers and show potential applications in cultural relic appraisal. In this study, an analytical approach based on solid phase microextraction combined with gas chromatography-mass spectrometry (SPME-GC/MS) was proposed for the evaluation of volatile organic compounds (VOCs) emitted by Chinese traditional handmade papers. The VOCs evaluations and artificial aging processes were both applied to recent-made papers and naturally aged papers from a traditional Chinese calligraphy and painting scroll (collected by the National Museum of China). To be noticed, a large number of aliphatic acids, aldehydes, ketones, furan derivatives, benzene series and terpenoid substances indicated that the VOCs signals not only reveal the degradation of paper but also tentatively reflect the storage environment along hundreds of years ago. The semi-quantitative evaluation of markers indicated that the historical paper is under a serious degradation due to the high capacity it releases. Our results provided a path way to get the degradation information of ancient paintings as well as potential realistic applications such as the conservation of paper-based relics and the environmental protection in libraries and museums.

Abstract Paper cultural relics such as double-sided printed newspapers and periodicals represent modern cultural heritage. Severe damage such as embrittlement, decay, and dreg generally occur to paper; hence, it urgently needs conservation and restoration. Therefore, herein, a new reinforcement method for the fragile double-sided printed paper cultural relics is proposed with cotton mesh and adhesive PVA217 as reinforcement materials. Using a computer measured and controlled folding endurance tester, a pendulum tensile strength tester, pH meter, pulp viscosimeter, and other instruments, the physical properties of newspaper samples before and after aging were evaluated. In addition, the mechanical properties, chromatic aberration and surface morphology of simulated samples before and after the cotton mesh reinforcement and Japanese washi paper reinforcement were assessed. The experimental results indicate that this new reinforcement method could effectively improve the physical strength, chromatic aberration and durability of the simulated samples. Widespread applications of this cotton mesh reinforcement method for the reinforcement and protection of the red revolutionary cultural relics such as double-sided printed newspaper and periodicals during the Republic of China era are foreseeable.

Abstract Paper degradation menaces the useful lifetime of books, manuscripts, and works on paper during storage, circulation, and display in libraries, archives, and museums. Severe damages such as embrittlement, decay, and mold often occur to the paper that might threaten to lose cultural heritage. However, the shelf life of papers stored in suitable conditions can be extended by hundreds of years. The most important external factors affecting the deterioration of paper-based materials include, in particular, changes in temperature and air humidity. In this study, the effects of accelerated aging under different conditions, including substantially different relative humidity, were considered relative to the strength properties of the paper sheets. These include the mechanical strength, such as breaking length, tear resistance, and bursting strength of the paper samples before and after dry heat aging and hydrothermal aging. Samples with various content of lignin produced in neutral pH were examined to exclude the adverse influence of acidity on paper properties. The results indicate that impact of moisture on tensile properties and pH-value of paper is much greater than the effect of increased temperature. The results of this work are intended to consolidate and expand the theoretical foundation and provide technical support for the conservators and library staff on the storage of paper cultural relics.

Abstract Quantification of the degradation behaviour of heritage objects is essential to manage the rate of degradation and hence optimise their lifetime. In this research, a 23 full factorial experiment was carried out to deepen the understanding of the photodegradation of historical rag paper induced by continuous polychromatic visible radiation. Oxygen concentration, relative humidity and illuminance were investigated as the three environmental factors of primary concern. The effects of these factors on the rate constant of change in diffuse reflectance and tristimulus discolouration were investigated by analysis of variance and multiple linear regression. The three main effects were found to contribute the most to the rate of photodegradation of historical paper, among which relative humidity played the most important role whereas illuminance played the least. This observation is likely to hold when extrapolating the experimental conditions to real conditions in collection storage and display.

Abstract Korean hand papermaking is a renowned cultural tradition in the Korean peninsula. It is still practiced while scientific analysis of paper itself from a large data set is rare. In this study, a set of more than three hundred Korean handmade papers, collected in a reference collection book Hanji: Korean handmade paper, were chemically investigated, and their property data such as colour, pH, grammage, thickness, tensile strength, folding endurance were statistically analysed in order to determine general features for Korean papers. The influence of different paper sheet formation methods (Heullimtteugi vs Gadumtteugi) were revealed by multivariate data analysis and the chemical profiles of raw materials were studied by pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS). The Korean handmade paper samples display colour gamut in the colour space L* (69.9–95.9), a* [(−3)-3], b* (0–20), most have neutral/alkaline pH values. Paper density, fiber orientation and physical properties are influenced by the sheet formation techniques. For instance, Gadumtteugi tends to produce papers with strong fiber orientation while Heullimtteugi produces papers with more evenly distribution of fibers. In addition, Py-GC/MS analysis results show that paper mulberry fibers contain less intensity lignin monomers and more terpenic compounds in comparison with gampi and mitsumata fibers. This study provides paper analysis from large sample set, statistics reveal that the material preparing and making craft determined the paper structure which reflected in their physical properties. These properties influenced paper performance and applications in art creations as well as relics conservation and restoration. The characterized paper sample database could be used for handmade paper studies in East Asian region. Consequently, this study contributes to a better understanding of contemporary Hanji properties as well as improves knowledge on handmade papers from the Korean peninsula.