Search

In this article, we explore the possibility of using spread spectrum time domain reflectometry (SSTDR) for detecting disconnections in a large-scale photovoltaic (PV) array. We discuss the importance, role, and trade-offs of SSTDR resolution, frequency, and attenuation in detecting disconnects in the system. Our results show that if the proper system parameters are chosen, disconnections can be detected in a 1-kV system consisting of twenty-six 60-cell PV panels and located within 1.52 m for the first 22 modules.

The operating efficiency of photovoltaic (PV) plants can be improved if damaged or degraded modules can be detected and identified. Currently, string-level power electronics can detect problems with modules or cabling but not locate them, which would facilitate addressing these issues. Here, we investigate the ability of spread spectrum time domain reflectometry (SSTDR) to both detect and locate/identify damaged cells and modules within a series-connected PV string. We tested the ability of SSTDR to detect and locate single-cell mini-modules and full-sized PV modules, which were intentionally damaged by impacts with a hammer (breaking the glass and damaging the silicon below) or by cutting through some or all busbars. Damage to the glass and silicon of cells was detected and located within a small string of minimodules. Busbar damage was detectable only if an open was created by cutting through all intercell busbars. Physical impact damage to the glass and silicon of a full-sized PV module could be detected, but further development of signal processing is needed to achieve localization of such damaged modules within a string.

Spread spectrum time domain reflectometry (SSTDR) is a broadband electrical reflectometry technique that has been used to detect and locate faults on live electrical systems, including photovoltaic systems. In this article, we evaluate the detectability and localizability from both existing literature and our own measurements using SSTDR of open-circuit faults, connection faults, short-circuit faults, ground faults, arc faults, shading faults, bypass diode faults, and accelerated degradation faults in PV cells and mini-modules. Reflection magnitudes for these faults are compared. Preliminary data on buried and grounded PV cable along with arc fault detection are presented.

This article describes the novel use of spread-spectrum time-domain reflectometry (SSTDR) for detecting and locating disconnection faults in photovoltaic (PV) power plants. We measure strings of cells and full-sized modules to understand how disconnections affect the reflectometry signature. PV modules correspond to reactive loads and disconnections in a PV string and cause distinguishable and measurable changes in SSTDR responses. Disconnection faults are manually introduced and correctly identified and localized applying the proposed technique. The SSTDR technique can detect and locate disconnects through at least eight 36-cell modules. Using the new technique described in this article, we can both detect and locate the disconnections within a 1-ft resolution, on average.

We present a framework for analyzing electromagnetic signal propagation through piecewise-defined transmission lines with arbitrary, series-connected impedances. While the formulation is general and scalable, we apply it here to propagation through a photovoltaic module with cables on either side acting, with a home run cable, as a section of an inhomogeneous transmission line. Understanding propagation through this unit of a series-connected string of photovoltaic modules is necessary to enable the use of time-domain reflectometry techniques for monitoring the status of individual components in series-connected strings within large photovoltaic arrays.