Search

A novel polarization-reconfigurable planar antenna is presented. The antenna consists of an electronically reconfigurable polarizer integrated with a printed slot. By changing the states of the p-i-n diodes on the polarizer, the linearly polarized (LP) waves radiated by the slot can be converted into either right-hand circularly polarized (RHCP) or left-hand CP (LHCP) waves. The polarizer contains 16 unit cells arranged as a $4\times 4$ array. The antenna radiates RHCP waves if the p-i-n diodes on the top side of the polarizer are switched ON, while LHCP waves are radiated if the p-i-n diodes of the bottom side of the polarizer are switched ON instead. The physical mechanisms of the antenna are discussed and the parametric study is carried out by full-wave simulations. To verify the concept, one prototype at 2.5 GHz is designed, fabricated, and measured. Good agreement between the measured and simulated results is obtained. The antenna achieves a gain ≥8.5 dBic in both RHCP and LHCP with an aperture efficiency of 70%. Advantages of the proposed design include electronically reconfigurable polarizations for RHCP or LHCP, low profile, low cost, high isolation between the dc bias circuit and RF signals, high power handling capability, and easy extension to large-scale arrays without increasing the complexity of the dc bias circuit. To the best of our knowledge, this is the first report of an electronically polarization-reconfigurable CP antenna with a single-substrate polarizer. [ABSTRACT FROM AUTHOR]

This paper presents a compact-size, low-cost smart antenna with electronically switchable radiation patterns, and reconfigurable polarizations. This antenna can be dynamically switched to realize three different polarizations including two orthogonal linear polarizations and one diagonally linear polarization. By closely placing several electronically reconfigurable parasitic elements around the driven antenna, the beam switching can be achieved in any of the three polarization states. In this design, a polarization reconfigurable square patch antenna with a simple feeding network is used as the driven element. The parasitic element is composed of a printed dipole with a PIN diode. Using different combinations of PIN diode on/off states, the radiation pattern can be switched toward different directions to cover an angle range of 0° to 360° in the azimuth plane. The concept is confirmed by a series of measurements. This smart antenna has the advantages of compact size, low cost, low power consumption, reconfigurable polarizations, and beams. [ABSTRACT FROM PUBLISHER]

To mitigate potential interferences with coexisting wireless systems operating over 3.3–3.6 GHz, 5.15–5.35 GHz, or 5.725–5.825 GHz bands, four novel band-notched antennas suitable for ultra-wideband (UWB) applications are proposed. These include UWB antennas with a single wide notched band, a single narrow notched band, dual notched bands, and triple notched bands. Each antenna comprises a half-circle shaped patch with an open rectangular slot and a half-circle shaped ground plane. Good band-notched performance is achieved by using high permittivity and low dielectric loss substrate, and inserting quarter-wavelength horizontal/vertical stubs or alternatively embedding quarter-wavelength open-ended slots within the feed line. The results of both simulation and measurement confirm that the gain suppression of the single and multiple band-notched antennas in each desired notched band are over 15 dB and 10 dB , respectively. The radiation pattern of the proposed triple band-notched design is relatively stable across the operating frequency band. [ABSTRACT FROM PUBLISHER]