Search

This paper presents a novel shared-aperture dual-band dual-polarized (DBDP) high-gain antenna for potential applications in synthetic aperture radars (SARs). To reduce the complexity of SAR antennae, a DBDP high-gain antenna based on the concept of Fabry–Perot resonant cavity is designed. This antenna operates in both $C$ - and $X$ -bands with a frequency ratio of 1:1.8. To form two separate resonant cavities, two frequency selective surface layers are employed, leading to high flexibility in choosing desired frequencies for each band. The beam-scanning capability of this proposed antenna is also investigated, where a beam-scanning angle range of ±15° is achieved in two orthogonal polarizations. To verify this design concept, three passive antenna prototypes were designed, fabricated, and measured. One prototype has broadside radiation patterns, while the other two prototypes have frozen beam scanned to +15°. The measured results agree well with the simulated ones, showing that the high gain, high port isolation, and low cross-polarization levels are obtained in both the bands. Compared with the conventional high-gain DBDP SAR antennae, the proposed antenna has achieved a significant reduction in the complexity, mass, size, loss, and cost of the feed network. [ABSTRACT FROM AUTHOR]

This paper presents a compact-size, low-cost smart antenna with electronically switchable radiation patterns, and reconfigurable polarizations. This antenna can be dynamically switched to realize three different polarizations including two orthogonal linear polarizations and one diagonally linear polarization. By closely placing several electronically reconfigurable parasitic elements around the driven antenna, the beam switching can be achieved in any of the three polarization states. In this design, a polarization reconfigurable square patch antenna with a simple feeding network is used as the driven element. The parasitic element is composed of a printed dipole with a PIN diode. Using different combinations of PIN diode on/off states, the radiation pattern can be switched toward different directions to cover an angle range of 0° to 360° in the azimuth plane. The concept is confirmed by a series of measurements. This smart antenna has the advantages of compact size, low cost, low power consumption, reconfigurable polarizations, and beams. [ABSTRACT FROM PUBLISHER]

To mitigate potential interferences with coexisting wireless systems operating over 3.3–3.6 GHz, 5.15–5.35 GHz, or 5.725–5.825 GHz bands, four novel band-notched antennas suitable for ultra-wideband (UWB) applications are proposed. These include UWB antennas with a single wide notched band, a single narrow notched band, dual notched bands, and triple notched bands. Each antenna comprises a half-circle shaped patch with an open rectangular slot and a half-circle shaped ground plane. Good band-notched performance is achieved by using high permittivity and low dielectric loss substrate, and inserting quarter-wavelength horizontal/vertical stubs or alternatively embedding quarter-wavelength open-ended slots within the feed line. The results of both simulation and measurement confirm that the gain suppression of the single and multiple band-notched antennas in each desired notched band are over 15 dB and 10 dB , respectively. The radiation pattern of the proposed triple band-notched design is relatively stable across the operating frequency band. [ABSTRACT FROM PUBLISHER]