Search

This communication presents the complete design of a circularly polarized (CP) folded reflectarray (FRA) antenna with an integrated planar structure for the first time in the open literature. To achieve circularly polarized, a printed meander-line polarizer is designed and integrated with the linearly polarized (LP) FRA. To achieve a low-profile planar structure, an integrated $2 \times 2$ planar array is designed as the feed source instead of a horn. Thus, the whole antenna, including the feed source, LPFRA, and meander-line polarizer, can be fully integrated and fabricated using low-cost printed circuit board technology. To validate the concept, a right-handed CPFRA operating in C-band is designed, fabricated, and measured. The broadside axial ratio (AR) of the proposed CPFRA is lower than 1 dB over a bandwidth from 5.22 to 5.46 GHz. In addition, the maximum gain of 22.8 dBic is obtained at 5.38 GHz with the antenna efficiency of 27%. The antenna is promising for applications in satellite communication due to advantages of low profile, easy fabrication, low cost, and high gain. [ABSTRACT FROM AUTHOR]

A novel design of a dual-band antenna with integrated filtering performance is proposed. A low-profile aperture-coupled U-slot patch antenna is employed for the dual-band operation with a uniform polarization, which is fed by a dual-mode stub-loaded resonator (SLR). The U-slot patch works as a dual-mode resonator of the dual-band filter as well as the radiation element. The odd- and even-modes of the SLR are coupled and tuned with the U-slot patch, generating two second-order operation bands at 3.6 and 5.2 GHz. Compared with the traditional patch antenna, the proposed antenna exhibits improved bandwidth and frequency selectivity. In addition, the bandwidths can be controlled by adjusting the coupling strength between the SLR and the patch. Furthermore, the higher order harmonics can be suppressed over a broadband without increasing the footprint of the design. The measured and simulated results agree well with each other, showing excellent performance in terms of impedance matching, bandwidths, second-order filtering, out-of-band rejection, cross-polarization discrimination, and gains at both the bands. [ABSTRACT FROM AUTHOR]

A novel dual-polarized patch antenna for ultra-wideband (UWB) applications is presented. The antenna consists of a square patch and four capacitively coupled feeds to enhance the impedance bandwidth. Each feed is formed by a vertical isosceles trapezoidal patch and a horizontal isosceles triangular patch. The four feeds are connected to the microstrip lines that are printed on the bottom layer of the grounded FR4 substrate. Two tapered baluns are utilized to excite the antenna to achieve high isolation between the ports and reduce the cross-polarization levels. In order to increase the antenna gain and reduce the backward radiation, a compact surface mounted cavity is integrated with the antenna. The antenna prototype has achieved an impedance bandwidth of 112% at (\vert S11 \vert \leq -10~dB) whereas the coupling between the two ports is below -28~dB across the operating frequency range. The measured antenna gain varies from 3.91 to 10.2 dBi for port 1 and from 3.38 to 9.21 dBi for port 2, with a 3-dB gain bandwidth of 107%. [ABSTRACT FROM PUBLISHER]