Search

This communication presents an a cylindrical active frequency selective surface (AFSS)-based electronically beam-switching antenna, which can operate at two different frequency bands. The antenna consists of a slot AFSS and an omnidirectional dual-band feed antenna. The p-i-n diodes of the AFSS can be switched on or off to reconfigure the AFSS as transparent or opaque to the incident electromagnetic waves, respectively. Thus, by controlling the dc bias voltages to different columns of p-i-n diodes, the directive beams of the antenna can be swept to cover the whole azimuth plane. To validate the design concept, the transmission coefficients of the active FSS sheet are experimentally examined. An antenna prototype operating at 2.5 and 5.3 GHz frequency bands is also fabricated and measured. Simulation and measurement results of the antenna are presented to verify the design principle. A comparison between this communication and other recent designs is provided. The antenna has advantages of low power, low cost, easy fabrication, and electronic beam switching covering a full 360° angular range. [ABSTRACT FROM AUTHOR]

A novel design of a dual-band antenna with integrated filtering performance is proposed. A low-profile aperture-coupled U-slot patch antenna is employed for the dual-band operation with a uniform polarization, which is fed by a dual-mode stub-loaded resonator (SLR). The U-slot patch works as a dual-mode resonator of the dual-band filter as well as the radiation element. The odd- and even-modes of the SLR are coupled and tuned with the U-slot patch, generating two second-order operation bands at 3.6 and 5.2 GHz. Compared with the traditional patch antenna, the proposed antenna exhibits improved bandwidth and frequency selectivity. In addition, the bandwidths can be controlled by adjusting the coupling strength between the SLR and the patch. Furthermore, the higher order harmonics can be suppressed over a broadband without increasing the footprint of the design. The measured and simulated results agree well with each other, showing excellent performance in terms of impedance matching, bandwidths, second-order filtering, out-of-band rejection, cross-polarization discrimination, and gains at both the bands. [ABSTRACT FROM AUTHOR]

This paper presents a novel shared-aperture dual-band dual-polarized (DBDP) high-gain antenna for potential applications in synthetic aperture radars (SARs). To reduce the complexity of SAR antennae, a DBDP high-gain antenna based on the concept of Fabry–Perot resonant cavity is designed. This antenna operates in both $C$ - and $X$ -bands with a frequency ratio of 1:1.8. To form two separate resonant cavities, two frequency selective surface layers are employed, leading to high flexibility in choosing desired frequencies for each band. The beam-scanning capability of this proposed antenna is also investigated, where a beam-scanning angle range of ±15° is achieved in two orthogonal polarizations. To verify this design concept, three passive antenna prototypes were designed, fabricated, and measured. One prototype has broadside radiation patterns, while the other two prototypes have frozen beam scanned to +15°. The measured results agree well with the simulated ones, showing that the high gain, high port isolation, and low cross-polarization levels are obtained in both the bands. Compared with the conventional high-gain DBDP SAR antennae, the proposed antenna has achieved a significant reduction in the complexity, mass, size, loss, and cost of the feed network. [ABSTRACT FROM AUTHOR]