Search

This paper presents a novel shared-aperture dual-band dual-polarized (DBDP) high-gain antenna for potential applications in synthetic aperture radars (SARs). To reduce the complexity of SAR antennae, a DBDP high-gain antenna based on the concept of Fabry–Perot resonant cavity is designed. This antenna operates in both $C$ - and $X$ -bands with a frequency ratio of 1:1.8. To form two separate resonant cavities, two frequency selective surface layers are employed, leading to high flexibility in choosing desired frequencies for each band. The beam-scanning capability of this proposed antenna is also investigated, where a beam-scanning angle range of ±15° is achieved in two orthogonal polarizations. To verify this design concept, three passive antenna prototypes were designed, fabricated, and measured. One prototype has broadside radiation patterns, while the other two prototypes have frozen beam scanned to +15°. The measured results agree well with the simulated ones, showing that the high gain, high port isolation, and low cross-polarization levels are obtained in both the bands. Compared with the conventional high-gain DBDP SAR antennae, the proposed antenna has achieved a significant reduction in the complexity, mass, size, loss, and cost of the feed network. [ABSTRACT FROM AUTHOR]

This paper presents a compact-size, low-cost smart antenna with electronically switchable radiation patterns, and reconfigurable polarizations. This antenna can be dynamically switched to realize three different polarizations including two orthogonal linear polarizations and one diagonally linear polarization. By closely placing several electronically reconfigurable parasitic elements around the driven antenna, the beam switching can be achieved in any of the three polarization states. In this design, a polarization reconfigurable square patch antenna with a simple feeding network is used as the driven element. The parasitic element is composed of a printed dipole with a PIN diode. Using different combinations of PIN diode on/off states, the radiation pattern can be switched toward different directions to cover an angle range of 0° to 360° in the azimuth plane. The concept is confirmed by a series of measurements. This smart antenna has the advantages of compact size, low cost, low power consumption, reconfigurable polarizations, and beams. [ABSTRACT FROM PUBLISHER]

A wideband and dual-polarization antenna array with high efficiency and high isolation is proposed. In order to achieve the desired performance, a wideband radiating element and a full-corporate waveguide feed network are employed in the design. In particular, ${{E}}-plane waveguides are utilized for the feed-network configuration so as to suppress wave leakage between adjacent layers when the antenna is fabricated via conventional machining techniques. The operational mechanism is presented and a \text16 \times \text16 antenna array is tested for verification. Experimental results show that the bandwidths of VSWR < \text2.0 for both of the polarizations are about 17.1% (12.45–14.78 GHz) and the isolation between the two polarization ports is better than 39.5 dB. In addition, more than 70% antenna efficiency with higher than 29.4 dBi gain is achieved over the operational bandwidth. [ABSTRACT FROM PUBLISHER]

A novel dual-polarized patch antenna for ultra-wideband (UWB) applications is presented. The antenna consists of a square patch and four capacitively coupled feeds to enhance the impedance bandwidth. Each feed is formed by a vertical isosceles trapezoidal patch and a horizontal isosceles triangular patch. The four feeds are connected to the microstrip lines that are printed on the bottom layer of the grounded FR4 substrate. Two tapered baluns are utilized to excite the antenna to achieve high isolation between the ports and reduce the cross-polarization levels. In order to increase the antenna gain and reduce the backward radiation, a compact surface mounted cavity is integrated with the antenna. The antenna prototype has achieved an impedance bandwidth of 112% at (\vert S11 \vert \leq -10~dB) whereas the coupling between the two ports is below -28~dB across the operating frequency range. The measured antenna gain varies from 3.91 to 10.2 dBi for port 1 and from 3.38 to 9.21 dBi for port 2, with a 3-dB gain bandwidth of 107%. [ABSTRACT FROM PUBLISHER]