Search

The Facility for Anti-proton and Ion Research (FAIR), under development at GSI, includes the synchrotron SIS300, so called because the magnetic rigidity is 300 Tm. In order to reach the required high intensities of proton and heavy ions beams, the bending dipole magnets have to be pulsed from the injection magnetic field of 1.5 T up to 4.5 T maximum field at the rate of 1 T/s. These 7.8 m long magnets have \cos\theta shaped coils with a 100 mm bore and the particular characteristic to be geometrically curved, with a sagitta of 112.9 mm. These challenging requirements triggered R&D activities, aimed at the development of suitable construction technologies for fast ramped curved coils. The heart of the R&D program is the construction of a 3.9 m long model. The paper discusses the main problems faced during the design and the construction of the cold mass, mainly covering the aspects related to the manufacture. [ABSTRACT FROM AUTHOR]

The hardware commissioning of the Large Hadron Collider required the testing and the qualification of the cryogenic and vacuum system, as well as the electrical systems for the powering of more than 10 000 superconducting magnets. Nonconformities had to be resolved within a tight schedule. In this paper, we focus on the role that electromagnetic-field computation has played during hardware commissioning in terms of the analysis of a magnet quench and electromagnetic-force calculations in busbars and splices, as well as field-quality prediction for the optimization of powering cycles. [ABSTRACT FROM AUTHOR]

The acceptance tests of the Cable in Conduit Conductors for the Toroidal Field coils of the ITER magnet system are being performed at the SULTAN facility in Villigen, Switzerland. The main physical quantity measured in these tests is the current sharing temperature, Tcs. In Tcs measurements, the E\-T characteristic curve of the conductor is traced. This curve is utilized here to evaluate the equivalent n-index and the effective strain of the superconducting Nb3Sn cable, under the simplifying assumptions of a uniform strain, current density and temperature distribution in the cable cross section. The variations of n-index and effective strain with mechanical cycling and their sensitivity to the applied transverse load and to the warm up-cooldown process are presented for various conductor samples tested recently. [ABSTRACT FROM AUTHOR]