Search

The charging/discharging delays in superconducting coils wound without insulation (NI coils) are a major drawback of the technique. While removing the insulation improves safety margins, the increase in the characteristic time constant τc can make a coil unfit for a particular purpose. It is widely accepted for instance that NI coils will not be used in ac applications where τc ~ 1/f. To decrease τc of the NI coils, the same length of superconductor can be wound/connected in parallel rather than in series — decreasing the inductance L, and hence the time constant τc, while maintaining the number of amp-turns IopN. Here we investigate the effect of parallel connecting coils in a magnet using a 2D axially symmetric model which captures all the necessary electromagnetic properties of the HTS NI coils. These properties include: critical current anisotropy Jc(B,θ), turn-to-turn conductivity, as well as winding parallelism. Our modeling results show that the parallel connected magnet experiences magnet-wide shielding current effects. Whilst these shielding currents affect field homogeneity — the model enables this effect to be quantified. Furthermore, shielding currents are not an issue when running NI coils in saturated mode. The modeling work presented here provides a simple initial example of how magnet designers may approach designing, optimizing, and operating high current, HTS NI coils. [ABSTRACT FROM AUTHOR]

To optimize the insulation design of high-temperature superconductivity (HTS) cable, the multilayer wrapping cable insulation properties in the liquid nitrogen should be studied. In this paper, we investigated the breakdown properties of multilayer wrapping of cable insulation in liquid nitrogen. AC and dc breakdown tests of a minimodel cable with an insulation floor composed of polypropylene laminate paper (PPLP), PPLP/100HN (DuPont polyimide film), PPLP/100CR (DuPont polyimide film), and PPLP/150FCR019 (DuPont polyimide film) and of singer-layer sheets, including PPLP, 100HN, 100CR, and 150FCR019, respectively, were performed in liquid nitrogen. The breakdown characteristics of the sheets and model cable insulation consisting of PPLP and composite insulation schemes according to the arrangement of PPLP/HN, PPLP/100CR, and PPLP/150FCR019 were compared. For the sheets, the ac breakdown strength of 100HN is greater than that of 100CR; this may be because there are large amounts of organic-inorganic interface in 100CR. The dc breakdown strength of 100CR is greater than that of 100HN, which may be because the space charge of 100CR homogenizes the electric field. For the minimodel cable insulation, the dc and ac breakdown strengths of the composite insulation in which the third layer of wrapping tape insulation material was composed of three layers of 100HN, which is overlapped completely, are greater than those of the insulation consisting of PPLP and other composite insulations. [ABSTRACT FROM PUBLISHER]

Purification of wastewater from paper factory was attempted by superconducting high gradient magnetic separation (HGMS) both in laboratory scale and pilot-plant scale experiments. Magnetite and some kinds of iron hydroxide particles were used as scavenging materials for suspended substances (SS) and organic dye molecules included in wastewater. The chemical oxygen demand (COD value) was used as a measure of purification of the wastewater. Optimum dosage of the scavenger was examined. Model wastewater was also prepared and tested in order to elucidate the mechanism of adsorption of the organic materials onto the scavenging particles. The obtained results showed that the wastewater was successfully purified by HGMS both in a laboratory scale and a pilot-plant scale. The apparatus modifications of magnetic filters and flow path were also made to accomplish the purification system for the practical use. The results can allow us to promote a scale-up design for greater capacity of the treatment of wastewater. [ABSTRACT FROM AUTHOR]

Corrections to “The Dielectric Strength of Nomex 410 Paper in Liquid Nitrogen under Boiling Situations” [ABSTRACT FROM AUTHOR]