Search

Spoke structure can increase the torque density of coaxial magnetic gear (CMG). However, the outer rotor can produce a large number of magnetic leakages. To improve the utility of PMs, a novel magnetic gear was proposed in this paper. The structure of the auxiliary flux modulator is a slotted iron yoke, and the slot angle is same as the stationary ring. Among, the permanent magnets (PMs) of inner rotor are adopted uneven block structure to improve air gap flux density. At the same time, the stationary ring adopts high-temperature superconducting (HTS) bulks, replacing the epoxy resin. In addition, Genetic algorithm (GA) is applied to calculate the optimal parameters of the proposed CMG. Finally, the air gap flux density and output torque of the magnetic gear a compared by the finite element method. The results show that the output torque of the proposed magnetic gear is effectively improved. [ABSTRACT FROM AUTHOR]

This paper proposes a novel high-temperature superconducting stator-excited axial-flux magnetic gear (HTS-SEAFMG) for the high-torque transmitting system. The proposed magnetic gear combines the merits of both HTS-excitation and stator-excitation. By using the HTS-excitation, a high air-gap flux density can be easily obtained, thus achieving the high torque density. The HTS-excitation windings are placed on the stator with a static seal of cooling Dewar which greatly reduces the manufacturing difficulty and the cost of refrigeration system compared with the dynamic seal. Thanks to the stator-excitation pattern, both the high-speed rotor and the low-speed rotor comprise only iron, thus contributing to the high mechanical reliability. The axially sandwich structure can also simplify its assembly in the high torque transmission applications. The dimensional parameter optimization and the electromagnetic performance evaluation are conducted by using the finite element method, respectively. The results show that the torque density of the proposed HTS-SEAFMG can reach 123 kNm/m3. Theoretical analysis and results are both given to verify the feasibility of the proposed HTS magnetic gear design. [ABSTRACT FROM AUTHOR]

A vernier permanent magnet (VPM) machine using high-temperature superconducting (HTS) winding for dual excitation is proposed for wind power generation. The proposed VPM machine adopts the parallel hybrid excitation configuration, the stator consists of an identical tooth pair connected together by the stator yoke and the rotor contains two sets of consequent-pole permanent magnets joined together by the rotor yoke. The armature winding is located at the stator main slots while the field winding using HTS coils is wound on the stator yoke. With the benefit of the HTS field winding, the air-gap flux can be flexibly adjusted by controlling the magnitude of the dc current. Therefore, the machine performance is improved to cope with different operating conditions. [ABSTRACT FROM PUBLISHER]

The basic concept of superconductive magnetic gears (SMGs) is to maximize the benefits and impact of the magnetic gearing technology by highlighting the future perspective of SMGs to produce a more efficient and compact system. This paper deals with a new analytical method (AM) for the calculation of magnetic field distribution in an SMG. A 2-D AM based on Laplace's partial differential equations of magnetic scalar potential in the different subdomains of a magnetic gear is introduced and solved by considering the corresponding boundary conditions. The proposed method shows a significant reduction in the consumed calculation time compared with the finite-element method (FEM) and can be used as a basis for design optimizations. Two-dimensional AM results are compared against those obtained from 2-D FEM simulations, using an accurate, yet efficient, high-temperature superconductor (HTS) modeling, yielded by a detailed localized E-J power law approach combining the different aspects of HTS in a numerical method, so as to find out the benefits and validity of the presented AM. Finally, the effects of PMs and pole pieces' dimensions on torque density are realized. [ABSTRACT FROM AUTHOR]