Search

The Last decade saw significant growth in the digital terrestrial television (DTT) subscribers. The High peak-to-average power ratio (PAPR) of the transmitted signal is implied by the large fluctuations in its amplitude, which is a serious issue in the contemporary and next generation DTT broadcasting systems. These large fluctuations prevent feeding the high power amplifier (HPA) at an operating point near its non-linear (NL) saturation region, thereby lowering its power efficiency. For a better future, energy-efficient green communications is the need of hour. This paper focuses on digital predistortion (DPD), which is among the widely used techniques for HPA linearization in order to minimize the NL effects. DPD technique requires a feedback signal. This paper proposes a novel adding signal-based digital predistortion, where the output of the HPA is gradually linearized by adding a signal at the input in an iterative manner. By Taylor series approximation, the DPD problem can be posed as a convex one. We prove that a tighter upper bound exists for the convergence factor and instead of directly solving the convex problem, we pick a convergence factor value within its bounds that offers a good trade-off between convergence speed and residual error value. The simulation results show that the proposed technique can quickly linearize the HPA with good convergence. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

An introduction is presented in which the editor discusses articles in the issue on topics including self-plagiarism.

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

Provides instructions and guidelines to prospective authors who wish to submit manuscripts. [ABSTRACT FROM AUTHOR]

This paper presents the research and implementation of a China Digital Radio (CDR) experimental network in Hubei, China with two FM-CDR transmitting stations and four FM-band channels. To study the coverage discontinuity problem in a large service area, the experimental network employs an intelligent networking solution that incorporates multiple service channels carrying Broadcast and Data Services (BADS) and a Common-Regional-Information Channel (CRIC) carrying both service data and system information. The electronic service guide (ESG) carried by CRIC can inform the receivers about the available contents from current and adjacent stations, which can significantly improve the service quality in the overlapping areas, especially under mobile reception environment. Two RF tuners are used in the receiving terminals to access the CRIC, and the BADS channel, respectively. This paper first presents the frequency analysis and coverage tests of the experimental network, and then summarizes the coverage performances with different transmission parameter combinations. The goal is to gain experience in frequency planning, coverage prediction, as well as supportable services of CDR digital audio broadcasting. [ABSTRACT FROM AUTHOR]

Terrestrial broadcast has traditionally targeted TV receivers in the home. But today’s most popular screens are those of SmartPhones and Tablet PCs. (Painful) Experience has shown that in order to reach those gadgets, IEEE- and 3GPP-specified solutions are required. Starting with TOoL+, the authors have proposed bridges between traditional broadcast and today’s wireless connectivity. Within the set of specifications of 3GPP such bridges named MBS, MBMS, and FeMBMS now exist – with limited acceptance by cellular network operators so far. The rapidly growing number of popular data services to SmartPhones, connected cars, etc., and 5G New Radio may change this in the future. Therefore, this paper presents a broadcast extension of today’s 5G New Radio supporting the implementation of High Tower High Power/Medium Power Medium Tower networks overlaying cellular networks. The extension was implemented using software defined radio and tested in a real-world field trial in Germany. [ABSTRACT FROM AUTHOR]

This paper encompasses various topics for 5G-involved broadcasting under the common context converged distribution of 5G media. Particularly, two primary subtopics are addressed: An overlaid coexistence of 5G terrestrial broadcast and Advanced Television Systems Committee (ATSC) 3.0; and dual connectivity applications built on top of the convergence between digital broadcasting and 5G unicasting. In the first part, a viable, time-sharing co-transmission system is introduced to overlay 5G Broadcast and ATSC 3.0 frames in the same radio spectrum. The system is carefully designed to comply with current 5G and ATSC 3.0 standards, so that it does not require modifications in either ATSC 3.0 or 5G specifications. To help the future planning in a technical aspect, the reliability performance is in-depth compared between 5G Broadcast and ATSC 3.0 frames, and the motivation of tower overlaying is discussed as well. Subsequently in the $2^{\mathrm{ nd}}$ part, the convergence is in parallel explored with respect to the dual connectivity. To settle a broad-ranged consensus for future convergence, various possible use cases are proposed in an application aspect. Technical, conceptual proposals and implementations are presented, specifically related to edge caching; 8K streaming (with a working prototype); large-scale software updating; data security; and location tracking. We hereby point out how dual connectivity can contribute to realistic scenarios. In turn, the scope of convergence use cases is desirably expanded, so that would encourage the initiatives bridging 5G and broadcasting into practice. [ABSTRACT FROM AUTHOR]

To protect military broadcasting against both hostile interference and eavesdropping, an artificial noise (AN) sheltered frequency hopping (FH) broadcasting (ANS-FHB) architecture is proposed in this paper, and the secrecy capacity is employed to measure its secrecy performance. Besides, considering the inevitable frequency mismatch after synchronization will degrade system secrecy in practical applications, the optimal transmitting power allocation (PA) for the confidential information (CI) and AN is provided to maximize secrecy capacity in presence of frequency mismatch. Moreover, to be adapted to various application scenarios, the proposed optimal PA scheme is further simplified according to the frequency synchronization ability and relative channel quality. The analysis and simulations show that the proposed ANS-FHB system can achieve a non-negative secrecy rate even when existing multiple eavesdroppers. In addition, the optimal power ratio of AN to CI shows a downward trend from one to zero as frequency mismatch increases to mitigate the secrecy loss. [ABSTRACT FROM AUTHOR]

Multicast and broadcast transmissions enhance the spectrum efficiency by delivering a single packet to multiple terminal users. The service continuity (SC) mechanism enables users to continue the service reception when the original transmission is not available anymore. For multicast and broadcast transmissions, the SC mechanism is different from that of unicast because of the different reception conditions. We design and analyze a set of SC mechanisms for New Radio (NR) multicast and broadcast transmissions (MBS) in this paper. The designed SC mechanisms do not require extra data-forwarding resources while meeting the interruption time requirements of diverse applications. To minimize the signalling overhead while meeting the latency requirements, we propose a dynamic SC configuration framework. With the framework, the network condition information is collected and the most suitable SC mechanism is chosen with its parameters. Simulation results demonstrate that the proposed dynamic configuration framework outperforms the LTE eMBMS solution with up to 84.07% signaling overhead reduction, facilitating a more efficient multicast and broadcast system in NR. [ABSTRACT FROM AUTHOR]

There emerges a strong trend recently to create an intelligent and controllable wireless transmission environment by installing reconfigurable intelligent surfaces (RIS) on the surface of diverse. We research the use of RIS in 5G multicast TV applications in this paper. In particular, the shape-adaptive RIS is developed to relay 5G multicast TV signals and achieve extra RIS gain. To optimize the shape bending in RIS model, we employ the algorithm of Deep Deterministic Policy Gradient (DDPG), a reinforcement learning technique that combines both Q-learning and Policy gradients. Our simulation results show that RIS can considerably enhance the SINR of worst users and improve the system’s overall Modulation and Coding Scheme (MCS) level for 5G mobile broadcasting services. [ABSTRACT FROM AUTHOR]

Along with the commercialization of evolved multimedia broadcast multicast services (eMBMS), the number of mobile broadcasting users is growing notably. Previous works reveal that the accuracy of mobile channel estimation will significantly impact the quality of broadcasting services. Motivated by this fact, we apply machine learning (ML) to the fifth-generation Radio Access Network (5G RAN) slicing in this paper for the estimation and the prediction of the channel status in mobile scenarios. More specifically, a cascaded convolutional neural network (CNN)-long short term memory network (LSTM) architecture is developed to achieve channel estimation for mobile broadcasting users. The energy efficiency of the base station (BS) is modeled mathematically, and the sub-optimal solution is achieved by deep Q-Network (DQN) based on the available channel status. Finally, we present the simulation results to justify the performance of our proposed schemes. [ABSTRACT FROM AUTHOR]

This paper presents feasibility verification of the Advanced Television Systems Committee (ATSC) 3.0 MIMO system for 8K-UHD terrestrial broadcasting services. For a reliable performance evaluation, computer simulation, laboratory test, and field trial are conducted, and the tests’ results are compared with the same performance metrics. Several physical layer configurations with various data rates from 63 Mbps to 113 Mbps are verified. The field trial results confirm that the ATSC 3.0 MIMO system can support data rates up to 113 Mbps within a 6 MHz bandwidth. [ABSTRACT FROM AUTHOR]

The new ways to consume and deliver media content in a wireless environment have led to a significant increase in the demand for spectrum resources. In addition, the arrival of next-generation wireless communication technologies has encouraged the creating of new verticals targeting novel applications, such as industry IoT, e-health, distance learning, smart city, smart-metering. All these new use cases are centred on an IP-based infrastructure. A promising alternative to satisfy the demand for resources is to incorporate a new delivery mechanism that can alleviate the congestion of classical cell-based point-to-point broadband wireless infrastructures. The best-positioned candidate is the next-generation Digital Terrestrial Television system, which offers a very spectrum efficient one-to-many PHY, and for the first time, native IP support. In ATSC 3.0, the whole system was designed with an IP-centric view, whereas DVB has created standards to deliver services to generic IP devices (DVB-I). Nevertheless, there is still a last missing piece to bring the broadcast infrastructure to the IP-connected world: a Broadcast Core Network (BCN). In this paper, the basics of a BCN are presented with new use cases that are attractive to Broadcast Network Operator (BNO). A possible roadmap towards implementation is described, and a service-based architecture for a BCN is presented and discussed. [ABSTRACT FROM AUTHOR]

This paper describes systems, devices, and methods to implement a bi-directional integrated inter-tower wireless communications network (IITWCN). The described technology can be implemented in combination with the Broadcast Core Network (BCN) in next generation broadcast eco-system and, therefore, support new business cases for broadcast operators such as the delivery of flexible datacasting services or support broadcast or point-to-point Internet services. The introduced bi-directional inter-tower communications network (ITCN) extends the previous unidirectional in-band distribution links (IDL) and adopts the on-channel repeater (OCR) as a simplified backhaul solution in single frequency networks (SFN). The concept of the coordinated ITCN is also presented, aiming at future broadcast Internet services. The ITCN provides a scalable and configurable network solution embedded in a broadcast system, which becomes independent from any non-broadcasting telecommunication infrastructure. The described technology partially relies on the infrastructure of the underlying broadcast/multicast network, using the allocated service channels without requiring additional frequency bands or a separate frequency band. The bi-directional inter-transmitter communication links are therefore referred to as integrated transmission links and the corresponding network as an integrated network. [ABSTRACT FROM AUTHOR]

In Multimedia Broadcast/Multicast Service(MBMS), Multicast/Broadcast Single Frequency Network (MBSFN) and Single-cell Point-to-multipoint Network (SC-PTM) are two essential ways to organize networks to provide multicast services. MBSFN shows its unique advantage of enhancing signals at the boundary of two cells, however, highly requiring synchronization of symbols. SC-PTM shows the advantage of the flexibility on the network deployment. The comparison and complementarity of these two modes are explored. In this paper, we analyze the reception performance of MBSFN and SC-PTM from multiple perspectives. We first compare the successful transmission probability (STP) of MBSFN with that of SC-PTM. Then, we consider optimal power control problems in MBSFN and SC-PTM. The corresponding power control optimization problems are with fraction and max-min forms and solved by the Dinkelbach algorithm. Furthermore, we propose a joint mode-selection and power-control method in the hybrid mode of MBSFN and SC-PTM, where each cell could select the multicast mode from MBSFN and SC-PTM. This is a mixed-integer nonlinear programming (MINLP) problem and solved by the concave-convex procedure (CCCP) and the Dinkelbach algorithm. To further improve the throughput, the appropriate successful reception proportion is selected under the opportunistic multicast. Finally, the numerical simulations show the performance of our algorithms and compare the throughput of two modes, which verify our analysis. [ABSTRACT FROM AUTHOR]

The media landscape is undergoing unprecedented transformations. Content creators and service providers had been for decades in control of how technology tailored to media applications was deployed and adopted in networks and devices to serve audiences. Disruption started when the Internet and global technologies and networks enabled content delivery and consumption at anytime, anywhere, and by means of any device. This new paradigm, where the Internet is fully accessible to the media industry, creates opportunities for innovation across the entire value chain, involving new services, innovative products, and a direct relationship with users. [ABSTRACT FROM AUTHOR]

A relevant solution for the high demand for new multimedia applications and services is millimeter wave (mmWave) frequency band in 5G. However, in order to face the technological challenges of the present and those that will appear in the short-term future, it is necessary to improve the spectral efficiency of 5G systems. In particular, the Radio Resource Management (RRM) module is considered an essential component. Nevertheless, resource allocation techniques that combine orthogonal multiplexing (OMA) schemes, such as Time Division Multiple Access (TDMA), with Non-Orthogonal Multiple Access (NOMA) techniques have not been studied in-depth. Therefore, this article designs and evaluates different RRM models that combine TDMA with NOMA for innovative applications in the 5G mmWave frequency bands. To this end, the advantages and challenges associated with mmWave frequency bands and potential future applications are introduced. An innovative use case has been designed to test the RRM models. The use case is based on the on-demand distribution of multimedia content in high-density environments, such as museum halls. The on-demand content aims at offering Augmented Reality (AR) services to unicast users in order to provide personalized services. The models have been evaluated in terms of throughput, capacity, and availability. According to the results, the combined RRM techniques offer up to 50% more capacity than the single multiplexing technology models and can provide video-on-demand service to practically the entire cell. [ABSTRACT FROM AUTHOR]

For decades, broadcasters have heavily relied on specialized hardware appliances for media transport and processing. However, new architectures, where media transport is realized using IP networking and general-purpose compute hardware is used to run Virtual Media Functions (VMFs), are increasingly being adopted in the broadcast industry. To truly exploit the benefits of these architectures, efficient resource allocation algorithms are needed. Hence, we have proposed an algorithm to optimize a media service’s VMF Forwarding Graph (VMF-FG) prior to deployment. To deploy media services, two VMF Placement and Chaining (VMF-PC) algorithms– Next-Fit Placement and Chaining (NFPC) and $k$ -cut Placement and Chaining ($k$ -cutPC) are proposed. The presented evaluation results compare the performance of the two VMF-PC algorithms along with highlighting the improvement in resource allocation as a result of VMF-FG decomposition. [ABSTRACT FROM AUTHOR]