Search

In this paper the power losses of efficient capacitive converters with multitude transfer ratio values are discussed. The loss mechanism circuits, based on general transposed series parallel (GTSP) topology, is studied and the losses are calculated, which in turn enables the “bottlenecks” to be identified and overcome. The calculations show that for a given number of switching cells the power losses of such converters are mainly dependent on the voltage conversion ratio, the topology function, the resistances of the switches in on and off states, the ESR of the capacitors, the switching frequency, the voltage drop, and the load. The theory explains the fact that was observed in experiments, that for low voltage conversion ratio values, efficiency decrease was measured. It is shown that for these low voltage ratio values the mechanism associated to the off resistance of the switches is more dominant and reduces the efficiency. This power loss estimation can be used as a powerful tool for the performance optimization of capacitive converters. The theoretical results are verified experimentally on a 10-cell GTSP converter prototype. The experimental results show good agreement with the proposed theory. [ABSTRACT FROM PUBLISHER]

A general transposed series-parallel topology of a switched-capacitor converter is presented and analyzed in this paper. This topology evolved from the conventional series-parallel through rectangular matrices based topologies to partial arbitrary matrices which are constructed of different size strings of capacitors to arbitrary matrices, based on a bank of equally valued capacitors. Theoretically, these topologies have a large number of dc/dc voltage ratios, which lead to the capability to achieve very accurate fixed dc/dc voltage ratios. These topologies also have the capability for “fine tuning” when voltage regulation is necessary. For the general transposed series-parallel topology, it is shown that the number of possible dc/dc voltage transfer ratios escalates exponentially with an addition of each capacitor as the sum of partition functions. Therefore, relatively fewer components are required for an assumed accurate voltage ratio. Dispersion of parameters in the capacitance value is considered. Small ripple analysis, losses calculations and efficiency considerations are also discussed. Simulations are performed for 2.2 and 2.25 voltage ratios. The simulations are in good agreement with the theoretical calculations. [ABSTRACT FROM PUBLISHER]