Search

In conventional multi-user multiple-input multiple-output (MU-MIMO) systems with frequency division duplexing (FDD), channel acquisition and precoder optimization processes have been designed separately although they are highly coupled. This paper studies an end-to-end design of downlink MU-MIMO systems which include pilot sequences, limited feedback, and precoding. To address this problem, we propose a novel deep learning (DL) framework which jointly optimizes the feedback information generation at users and the precoder design at a base station (BS). Each procedure in the MU-MIMO systems is replaced by intelligently designed multiple deep neural networks (DNN) units. At the BS, a neural network generates pilot sequences and helps the users obtain accurate channel state information. At each user, the channel feedback operation is carried out in a distributed manner by an individual user DNN. Then, another BS DNN collects feedback information from the users and determines the MIMO precoding matrices. A joint training algorithm is proposed to optimize all DNN units in an end-to-end manner. In addition, a training strategy which can avoid retraining for different network sizes for a scalable design is proposed. Numerical results demonstrate the effectiveness of the proposed DL framework compared to classical optimization techniques and other conventional DNN schemes. [ABSTRACT FROM AUTHOR]

In this paper, we consider deploying an intelligent reflecting surface (IRS) to enhance the downlink (DL) energy transfer and uplink (UL) information transmission efficiency for secure multiple-input multiple-output (MIMO) wireless powered communication networks (WPCNs). We aim to maximize the secrecy throughput of all users by jointly optimizing the DL/UL time allocation, the energy transmit covariance matrix of hybrid access point (AP), the information transmit beamforming matrix of users and the phase shifts of IRS in DL/UL, subject to constraints of energy/information transmit power at the hybrid AP/users and that of unit-modulus IRS phase shifts for DL/UL. To tackle the non-convex problem, we first transform the original problem into an equivalent form based on the mean-square error (MSE) method given time allocation, and then apply the alternating algorithm to update the optimization variables iteratively. Specifically, the energy covariance matrix and the information beamforming matrix are obtained based on the dual subgradient method. For the IRS phase shifts, we investigate two IRS beamforming reflection setups, namely different DL/UL IRS beamforming and identical DL/UL IRS beamforming. For the former case, the second-order cone programming technique and the Majorization-Minimization algorithm/element by element iterative algorithm are applied to obtain the DL and UL IRS phase shifts, respectively. For the latter case, the IRS phase shifts are obtained by the successive convex approximation technique. To further reduce the computational complexity of the single-user system, we derive the closed-form solutions of IRS phase shifts in each iteration for the two different reflection setups. Simulation results show that all the proposed algorithms can greatly improve the secrecy throughput compared to the conventional system without IRS. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) is regarded as a promising technology with great potential to boost wireless networks. Affected by the “double fading” effect, however, conventional passive RIS cannot bring considerable performance improvement when users are not close enough to RIS. Recently, active RIS is introduced to combat the double fading effect by actively amplifying incident signals with the aid of integrated reflection-type amplifiers. In order to reduce the hardware cost and energy consumption due to massive active components in the conventional fully-connected active RIS, a novel hardware-and-energy efficient sub-connected active RIS architecture has been proposed recently, in which multiple reconfigurable electromagnetic elements are driven by only one amplifier. In this paper, we first develop an improved and accurate signal model for the sub-connected active RIS architecture. Then, we investigate the joint transmit precoding and RIS reflection beamforming (i.e., the reflection phase-shift and amplification coefficients) designs in multiuser multiple-input single-output (MU-MISO) communication systems. Both sum-rate maximization and power minimization problems are solved by leveraging fractional programming (FP), block coordinate descent (BCD), second-order cone programming (SOCP), alternating direction method of multipliers (ADMM), and majorization-minimization (MM) methods. Extensive simulation results verify that compared with the conventional fully-connected structure, the proposed sub-connected active RIS can significantly reduce the hardware cost and power consumption, and achieve great performance improvement when power budget at RIS is limited. [ABSTRACT FROM AUTHOR]

Symbol detection (SD) plays an important role in a digital communication system. However, most SD algorithms require channel state information (CSI), which is often difficult to estimate accurately. As a consequence, it is challenging for these SD algorithms to approach the performance of the maximum likelihood detection (MLD) algorithm. To address this issue, we employ both semi-supervised learning and ensemble learning to design a flexible parallelizable approach in this paper. First, we prove theoretically that the proposed algorithms can arbitrarily approach the performance of the MLD algorithm with perfect CSI. Second, to enable parallel implementation and also enhance design flexibility, we further propose a parallelizable approach for multi-output systems. Finally, comprehensive simulation results are provided to demonstrate the effectiveness and superiority of the designed algorithms. In particular, the proposed algorithms approach the performance of the MLD algorithm with perfect CSI, and outperform it when the CSI is imperfect. Interestingly, a detector constructed with received signals from only two receiving antennas (less than the size of the whole receiving antenna array) can also provide good detection performance. [ABSTRACT FROM AUTHOR]

Mobile-Edge Computing (MEC) is an emerging paradigm in the Internet of Vehicles (IoV) to meet the ever-increasing computation demands of smart applications. To provide satisfactory computation performance, it is of significant importance to conduct computation offloading in IoV. In this paper, we investigate a multi-vehicle IoV system assisted by MECs with limited computation resources, where vehicles with complex applications can offload their subtasks to MEC servers. Applications are modeled as interdependent subtasks with general random task graphs, different from existing works with independent ones. To maximize the average logarithmic data processing rate (LDPR), the computation offloading problem is formulated as a time-average optimization with long-term constraints, which results from variable vehicle number, various applications and time-varying communication channels. To reduce the cooperation overhead, we propose a multi-agent Proximal Policy Optimization algorithm (Ly-MAPPO) which requires local observation only to solve the subproblems achieved by Lyapunov optimization technique in real time. In addition, to improve the performance of the Ly-MAPPO algorithm, Graph Convolutional Neural Network (GCN) is introduced to extract inter-dependencies between subtasks. Extensive simulations show that the GCN embedded Ly-MAPPO outperforms other baseline algorithms, e.g., greedy algorithm and gene algorithm, etc., for different traffic loads and computation resources in MEC servers. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel state-space model to represent the behavior of sum-product algorithm (SPA) in the vicinity of a trapping set (TS) of a low-density parity-check (LDPC) code over the additive white Gaussian noise (AWGN) channel in the error floor region. The proposed model takes into account the non-linear behavior of SPA in the initial iterations using a quadratic approximation, and dynamically adjusts the operating point of the model in accordance to the statistical properties of TS messages. This is in contrast to the existing linear state-space models which linearly approximate the non-linear behavior of SPA at around the operating point of zero in all iterations. Simulation results are provided to demonstrate the higher accuracy of the proposed model in estimating the error floor of LDPC codes compared to the linear state-space model. We also make connections to the semi-analytical code-dependent technique proposed by Richardson for the error floor estimation of LDPC codes, and demonstrate that the proposed state-space model not only is a fully-analytical code-independent counterpart to that method, but also has less complexity and, in some cases, more accuracy. [ABSTRACT FROM AUTHOR]

Coded distributed computing (CDC) is an efficient method to reduce the communication load in general distributed computing frameworks such as MapReduce. In these systems, one usually needs to split the data set into disjoint files and design several output functions to complete a computational task. Li et al. provided some CDC schemes achieving optimal communication load. However, as the number of computing nodes increases, the numbers of input files and output functions of such schemes grow too fast to be applied in practice. In this paper, several infinite families of cascaded CDC schemes, where each output function is computed multiple times, are constructed by taking advantage of symmetric designs. Most importantly, the numbers of input files and output functions of each new scheme are linear with the number of computing nodes and the communication load of each new scheme approximates to that of the CDC scheme derived by Li et al. when the number of nodes becomes large. [ABSTRACT FROM AUTHOR]

In this paper, we consider unmanned aerial vehicles (UAVs) equipped with a visible light communication (VLC) access point and coordinated multipoint (CoMP) capability that allows users to connect to more than one UAV. UAVs can move in 3-dimensional (3D) at a constant acceleration, where a central server is responsible for synchronization and cooperation among UAVs. The effect of accelerated movement in UAV is necessary to be considered. Unlike most existing works, we examine the effects of variable speed on kinetics and radio resource allocations. For the proposed system model, we define two different time scales. In the frame, the acceleration of each UAV is specified, and in each slot, radio resources are allocated. Our goal is to formulate a multi-objective optimization problem where the total data rate is maximized, and the total communication power consumption is minimized simultaneously. To handle this multi-objective optimization, we first apply the scalarization method and then apply multi-agent deep deterministic policy gradient (MADDPG). We improve this solution method by adding two critic networks together with two-stage resource allocation. [ABSTRACT FROM AUTHOR]

In this paper, a reconfigurable intelligent surfaces (RISs)-aided millimeter wave (mmWave) uplink (UL) rate-splitting multiple access (RSMA) system is investigated which targets to achieve better rate performance and enhanced coverage capability for multiple users. The considered UL RSMA model splits the rate for each user by dividing their message into multiple parts and hence exploits all the necessary degrees of freedom to achieve maximum capacity region and high user fairness. In particular, we focus on the sum-rate maximization for considered UL RSMA system subject to joint optimization of power allocation to the UL users and beamforming design, i.e., active receive beamforming at the base-station (BS) and passive beamforming at multiple RISs. To efficiently mitigate high inter-node interference in multi-user scenario, we first provided a low-complex user pairing scheme based on k-means clustering and then develop an effective low-cost alternating optimization framework to solve the joint optimization problem sub-optimally by decoupling the problem into different sub-problems of power allocation and beamforming design. Specifically, the sub-problems of power allocation and beamforming design are solved using successive convex approximation, Riemannian manifold and fractional programming techniques. Later, the unified solution based on block coordinate descent (BCD) algorithm is proposed. Extensive numerical simulations validate that the user-clustering effectively significantly improves the performance gain and the considered RSMA system outperforms the conventional multiple schemes in terms rate and user-fairness. Also, the exploitation of spatial correlation among each RIS elements i.e., non-diagonal phase-matrices at each RIS achieve better performance that conventional diagonal phase-matrices setting. [ABSTRACT FROM AUTHOR]

Network function virtualization redefines a network service as a softwarized chain of virtual network functions (VNFs), which decouples the specific network service from dedicated devices and greatly reduces the hardware cost. The VNFs are generally deployed on common off-the-shelf servers and statistically share computational resources. Due to the inherent integer constraints, the corresponding VNF mapping and scheduling issue is a highly challenging task. In this paper, we consider the mapping and scheduling of VNFs for a given network service, for which a flexible job shop scheduling problem is formulated to optimize the max-min fairness while ensuring the delay requirements of different service chains. Specifically, we propose a deep reinforcement learning method based on offline proximal policy optimization, which dynamically determines the mapping and scheduling decision based on the state of unfinished service chains. The proposed algorithm is scalable to the number of service chains and can be enhanced by Monte Carlo tree search. Numerical results show that the proposed algorithm outperforms the traditional random forest and the greedy algorithms in terms of both service fairness and acceptance ratio. [ABSTRACT FROM AUTHOR]

We consider the application of the factor graph framework for symbol detection on linear inter-symbol interference channels. Based on the Ungerboeck observation model, a detection algorithm with appealing complexity properties can be derived. However, since the underlying factor graph contains cycles, the sum-product algorithm (SPA) yields a suboptimal algorithm. In this paper, we develop and evaluate efficient strategies to improve the performance of the factor graph-based symbol detection by means of neural enhancement. In particular, we consider neural belief propagation and generalizations of the factor nodes as an effective way to mitigate the effect of cycles within the factor graph. By applying a generic preprocessor to the channel output, we propose a simple technique to vary the underlying factor graph in every SPA iteration. Using this dynamic factor graph transition, we intend to preserve the extrinsic nature of the SPA messages which is otherwise impaired due to cycles. Simulation results show that the proposed methods can massively improve the detection performance, even approaching the maximum a posteriori performance for various transmission scenarios, while preserving a complexity which is linear in both the block length and the channel memory. [ABSTRACT FROM AUTHOR]

Short packet communications play key roles in the Internet-of-Things. Conventional Shannon’s coding theorem is not applicable for short packet communications, and the achievable rate in the finite blocklength regime is related to the blocklength and the decoding error probability. Contrary to conventional physical layer security, wireless information surveillance assumes that the communication users are suspicious users and the eavesdroppers are legitimate monitors, and proactive eavesdropping via jamming has been proposed to improve the eavesdropping performance. Existing works on proactive eavesdropping ignored the scenario when the suspicious users adopt the short packet communications. Thus, this paper tries to develop effective proactive eavesdropping schemes suitable for the short packet suspicious communications. Under the truncated channel inversion power allocation and the modified constant power allocation policies at the suspicious source, the problems of jamming power allocation for maximizing the monitoring success probability subject to the average transmit power constraint at the monitor are investigated. Based on the Dinkelbach-type algorithm, the Lagrange duality method and a novel tractable approximate expression for the decoding error probability, we derive suboptimal solutions to the problems. Simulation results demonstrate the effectiveness of the proposed solutions compared to various benchmark algorithms in existing literature. [ABSTRACT FROM AUTHOR]

The successive cancellation (SC) process in which symbols are decoded sequentially by processing some intermediate information is an essential component of various decoding algorithms used for polar codes and their variants. In some decoding schemes, we may need to redo this process from some specific symbol or from the first symbol. This operation is called rewinding. Rewinding the SC process seems trivial if we have access to all intermediate log-likelihood ratios (LLRs) and partial sums. However, as the block length increases, retaining all of the intermediate information becomes inefficient and impractical. Rewinding the SC process in a memory-efficient way is a problem that we address in this paper. As we store a fraction of all the intermediate information in the memory-efficient scheme, we may not be able to rewind the SC process to the target symbol index. The reason is that some of the stored intermediate information needed to decode the target symbol may have been overwritten. To recompute the lost information, we may need to rewind the process further. Before proposing the formal scheme for the rewinding process, we explore the known properties of the SC process based on the binary representation of the bit indices. Then, we introduce a new operator used for grouping the bit indices. This special grouping helps us in finding the closest bit index to the target index for rewinding. We also analytically prove that this approach gives access to the untouched intermediate information stored in the memory which is essential in resuming the SC process. Finally, we adapt the proposed approach to multiple rewinds and apply it to SC-flip decoding and shifted-pruning-based list decoding. The numerical evaluation of the proposed solution shows a significant reduction of ≥50% in the complexity of the additional decoding attempts at medium and high SNR regimes for SC-flip decoding and less for shifted-pruning based list decoding. [ABSTRACT FROM AUTHOR]

The use of 1-bit analog-to-digital converters (ADCs) is seen as a promising approach to significantly reduce the power consumption and hardware cost of multiple-input multiple-output (MIMO) receivers. However, the nonlinear distortion due to 1-bit quantization fundamentally changes the optimal communication strategy and also imposes a capacity penalty to the system. In this paper, the capacity of a Gaussian MIMO channel in which the antenna outputs are processed by an analog linear combiner and then quantized by a set of zero threshold ADCs is studied. A new capacity upper bound for the zero threshold case is established that is tighter than the bounds available in the literature. In addition, we propose an achievability scheme which configures the analog combiner to create parallel Gaussian channels with phase quantization at the output. Under this class of analog combiners, an algorithm is presented that identifies the analog combiner and input distribution that maximize the achievable rate. Numerical results are provided showing that the rate of the achievability scheme is tight in the low signal-to-noise ratio (SNR) regime. Finally, a new 1-bit MIMO receiver architecture which employs analog temporal and spatial processing is proposed. The proposed receiver attains the capacity in the high SNR regime. [ABSTRACT FROM AUTHOR]

Coded caching is an emerging technique to reduce the data transmission load during the peak-traffic times. In such a scheme, each file in the data center or library is divided into a number of packets to pursue a low broadcasting rate based on the designed placements at each user’s cache. However, the implementation complexity of this scheme increases with the number of packets. It is crucial to design a scheme with a small subpacketization level, while maintaining a relatively low transmission rate. Recently, a combinatorial structure called placement delivery array (PDA) was proposed as an effective tool to design coded caching schemes with a relatively low subpacketization level. This paper proposes a novel PDA construction by selecting proper orthogonal arrays (POAs), which generalizes the existing construction but with a more flexible memory size. Based on the proposed PDA construction, an effective transform is further proposed to enable a coded caching scheme to achieve a smaller subpacketization level. Moreover, two new coded caching schemes with the coded placement are derived. It is shown that the proposed schemes can yield a lower subpacketization level or transmission rate over the benchmark schemes. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) can be employed in a cell-free system to create favorable propagation conditions from base stations (BSs) to users via configurable elements. However, prior works on RIS-aided cell-free system designs mainly rely on the instantaneous channel state information (CSI), which may incur substantial overhead due to extremely high dimensions of estimated channels. To mitigate this issue, a low-complexity algorithm via the two-timescale transmission protocol is proposed in this paper, where the joint beamforming at BSs and RISs is facilitated via alternating optimization framework to maximize the average weighted sum-rate. Specifically, the passive beamformers at RISs are optimized through the statistical CSI, and the transmit beamformers at BSs are based on the instantaneous CSI of effective channels. In this manner, a closed-form expression for the achievable weighted sum-rate is derived, which enables the evaluation of the impact of key parameters on system performance. To gain more insights, a special case without line-of-sight (LoS) components is further investigated, where a power gain on the order of $\mathcal {O}(M)$ is achieved, with $M$ being the BS antennas number. Numerical results validate the tightness of our derived analytical expression and show the fast convergence of the proposed algorithm. Findings illustrate that the performance of the proposed algorithm with two-timescale CSI is comparable to that with instantaneous CSI in low or moderate SNR regime. The impact of key system parameters such as the number of RIS elements, CSI settings and Rician factor is also evaluated. Moreover, the remarkable advantages from the adoption of the cell-free paradigm and the deployment of RISs are demonstrated intuitively. [ABSTRACT FROM AUTHOR]

The growing number of Internet of Thing (IoT) and Ultra-Reliable Low Latency Communications (URLCC) use cases in next generation communication networks calls for the development of efficient Forward Error Correction (FEC) mechanisms. These use cases usually imply using short to mid-sized information blocks and requires low-complexity and/or fast decoding procedures. This paper investigates the joint learning of short to mid block-length coding schemes and associated Belief-Propagation (BP) like decoders using Machine Learning (ML) techniques. An interpretable auto-encoder (AE) architecture is proposed, ensuring scalability to block sizes currently challenging for ML-based linear block code design approaches. By optimizing a coding scheme w.r.t. the targeted decoder, the proposed system offers a good complexity/performance trade-off compared to various codes from literature with length up to 128 bits. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) is a promising technology which can be integrated with non-orthogonal multiple access (NOMA) to improve the secrecy performance. In this paper, we propose two IRS-aided schemes to enhance the security of NOMA networks for the internal and external eavesdropping, respectively. First, to deal with an internal untrusted user, the secrecy rate maximization problem is formulated by jointly optimizing the active and passive beamforming, while meeting the quality of service (QoS) demand of the untrusted user, decoding order constraints, and unit modulus constraints of IRS elements. Furthermore, considering a worse scenario with both internal and external eavesdroppers, we minimize the transmit power of legitimate signals with both users’ QoS demands satisfied. In this way, the confidential information leakage will be mitigated and more transmit power can be allocated as artificial jamming to attenuate the eavesdropping. To tackle the non-convex optimization, the original problem in each scheme is first decomposed into two subproblems, which are approximated into convex ones via the semidefinite relaxation (SDR). Then, by means of alternating optimization, the suboptimal solutions to the original problems can be obtained. Simulation results demonstrate the superiority of the proposed schemes against the challenging internal and external eavesdropping by combining IRS and NOMA. [ABSTRACT FROM AUTHOR]

With the full development of intelligent mobile communications, wireless mixed reality (MR) provides a more visually immersive experience and stronger interaction with environments than virtual reality (VR) and augmented reality (AR). However, the asymmetric characteristic of wireless MR traffic creates a huge challenge to current mobile networks. Dynamic time division duplex (D-TDD) is considered as a promising technology to improve wireless MR users’ quality of experience (QoE) due to its potentials and advantages in delivering asymmetric traffic. Therefore, in this paper, we propose a QoE-driven distributed multidimensional resource allocation (MRA) supplemented by inter-cell interference (ICI) mitigation scheme for wireless MR in multi-cell D-TDD systems. First, to improve QoE of MR users, we formulate the joint optimization of subframe configuration, channel assignment and computation offloading as a mixed-integer nonlinear programming problem. A novel fully-decentralized multi-agent deep Q-network (DQN) algorithm is developed to solve the problem. Then, to mitigate ICI, a water filling based power control algorithm is investigated to minimize the total power of each small base station and its associated MR users. Simulation results demonstrate that our proposed scheme improves QoE of MR users in a realizable way as compared to existing schemes. [ABSTRACT FROM AUTHOR]

The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) waves. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In this paper, we propose a complete and detailed circuit-based reflection-refraction model for the IOS, which is formulated in terms of the physical structure and equivalent circuits of the IOS elements, as well as we validate it with the aid of full-wave EM simulations. Based on the proposed circuit-based model for the IOS, we analyze the asymmetry between the reflection and transmission coefficients. Moreover, the proposed circuit-based model is utilized for optimizing the hybrid beamforming of IOS-assisted networks and hence improving the system performance. To verify the circuit-based model, the theoretical findings, and to evaluate the performance of full-dimensional beamforming, we implement a prototype of IOS and deploy an IOS-assisted wireless communication testbed to experimentally measure the beam patterns and to quantify the achievable rate. The obtained experimental results validate the theoretical findings and the accuracy of the proposed circuit-based reflection-refraction model for IOSs. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new linear-equation ordered-statistics decoding (LE-OSD). Unlike the OSD, LE-OSD uses high reliable parity bits rather than information bits to recover codeword estimates, which is equivalent to solving a system of linear equations (SLE). Only test error patterns (TEPs) that create feasible SLEs, referred to as the valid TEPs, are used to obtain codeword estimates. We introduce several constraints on the Hamming weight of TEPs to limit the overall decoding complexity. Furthermore, we analyze the block error rate (BLER) and the computational complexity of the proposed approach. It is shown that LE-OSD has a similar performance to OSD in terms of BLER, which can asymptotically approach Maximum-likelihood (ML) performance with proper parameter selections. Simulation results demonstrate that the LE-OSD has a significantly reduced complexity compared to OSD, especially for low-rate codes, that usually require high decoding order in OSD. Nevertheless, the complexity reduction can also be observed for high-rate codes. In addition, we further improve LE-OSD by applying the decoding stopping condition and the TEP discarding condition. As shown by simulations, the improved LE-OSD has a considerably reduced complexity while maintaining the BLER performance, compared to the latest OSD approaches from literature. [ABSTRACT FROM AUTHOR]

This paper studies the unmanned aerial vehicle (UAV) based multiple intelligent reflecting surface (IRS) network, where the hovering UAV acts as a base station, and the IRS enhances signal transmission to across obstacle between users and UAV. To achieve the maximum sum rate of proposed communication scenario, a non-convex problem considering IRS association results, hovering altitude of UAV, and the phase shift design of multi-IRS is formulated. From the IRS association problem, we can find that the IRS association results are coupled to the decoding order of non-orthogonal multiple access (NOMA). To tackle this, a mathematical interference expansion scheme is developed to decouple it and transform it to convex by binary relaxation method. The non-convexity of hovering altitude optimization problem is solved by logarithm operation, approximation, and auxiliary matrices. For the phase shift optimization problem of multi-IRS, we propose a gradient approximation based initial scheme and develop a univariate optimization based approach on the basis to achieve the users sum rate improvement in multi-IRS. In the end, we compare the proposed scheme with baseline scheme to present the superiority of this work under various network settings. The internal reasons for the variation of simulation results are also analyzed. [ABSTRACT FROM AUTHOR]

In conventional molecular communication (MC) systems, the signaling molecules used for information transmission are stored, released, and then replenished by a transmitter (TX). However, the replenishment of signaling molecules at the TX is challenging in practice. Furthermore, in most envisioned MC applications, e.g., in the medical field, it is not desirable to insert the TX into the MC system, as this might impair natural biological processes. In this paper, we propose the concept of media modulation based MC where the TX is placed outside the channel and utilizes signaling molecules already present inside the system. The signaling molecules can assume different states which can be switched by external stimuli. Hence, in media modulation based MC, the TX modulates information into the state of the signaling molecules. In particular, we exploit the group of photochromic molecules, which undergo light-induced reversible state transitions, for media modulation. We study the usage of these molecules for information transmission in a three-dimensional duct system, which contains an eraser, a TX, and a receiver for erasing, writing, and reading of information via external light, respectively. We develop a statistical model for the received signal which accounts for the distribution of the signaling molecules in the system, the initial states of the signaling molecules, the reliability of the state control mechanism, the randomness of irrepressible, spontaneous state switching, and the randomness of molecule propagation. We adopt a maximum likelihood detector and show that it can be reduced to a threshold based detector. Furthermore, we derive analytical expressions for the optimal threshold value and the resulting bit error rate (BER), respectively. Both the statistical model and BER results are verified by computer simulations. Our results reveal that media modulation enables reliable information transmission, validating it as a promising alternative to MC based on molecule emitting TXs. [ABSTRACT FROM AUTHOR]

In optical fiber communication, due to the random variation of the environment, the state of polarization (SOP) fluctuates randomly with time leading to distortion and performance degradation. The memory-less SOP fluctuations can be regarded as a two-by-two random unitary matrix. In this paper, for what we believe to be the first time, the capacity of the polarization drift channel under an average power constraint with imperfect channel knowledge is characterized. An achievable information rate (AIR) is derived when imperfect channel knowledge is available and is shown to be highly dependent on the channel estimation technique. It is also shown that a tighter lower bound can be achieved when a unitary estimation of the channel is available. However, the conventional estimation algorithms do not guarantee a unitary channel estimation. Therefore, by considering the unitary constraint of the channel, a data-aided channel estimator based on the Kabsch algorithm is proposed, and its performance is numerically evaluated in terms of AIR. Monte Carlo simulations show that Kabsch outperforms the least-square error algorithm. In particular, with complex, Gaussian inputs and eight pilot symbols per block, Kabsch improves the AIR by 0.20 to 0.30 bits/symbol throughout the range of studied signal-to-noise ratios. [ABSTRACT FROM AUTHOR]

The problem of computing the Hamming weight distribution of linear codes is considered in this paper. A novel method to enumerate all codewords up to a certain Hamming weight for binary linear block codes in general and in particular for the punctured, shortened, precoded polar codes is introduced. The proposed approach performs a recursive decomposition of the codes using construction X4 that is typically used to combine codes of different lengths. This allows to enumerate the low-weight codewords of the overall code as combinations of the low-weight codewords of the component codes. Numerical results show that the proposed approach can efficiently compute the exact partial weight distribution of the 5G New Radio punctured/shortened polar codes with CRC11 and pure polar codes. In the former and latter cases, the low-weight codeword number is up to 106 and 108, respectively. Besides, randomly punctured and shortened polar codes and randomly precoded polar codes are also considered. To the best of the authors’ knowledge, this is the first method able to solve these problems. [ABSTRACT FROM AUTHOR]

This paper studies cached-aided multicast transmissions in fronthaul fog radio access networks (F-RANs). While index coding and cached-aided non-orthogonal multiple access (NOMA) are techniques commonly used for utilizing cache contents to save transmit energy, there is a lack of general framework to integrate them. This work proposes index-coded NOMA and dynamic coded-NOMA to investigate energy performance of the integration of index coding and NOMA under whole-file and subfile caching, respectively. Besides, dynamic cache space allocation is applied to both caching schemes, which allocates cache sizes to the fog access points (F-APs) according to their large-scale channel conditions. For index-coded NOMA, the general grouping problem is proved to be NP-hard and optimal solutions for some special cases are given. Furthermore, efficient heuristic grouping algorithms are proposed. For dynamic coded-NOMA, we obtain the closed-form minimum transmit energy. The numerical results validate the good performance of our proposed algorithms. Index-coded NOMA and dynamic coded-NOMA have comparable performance and both of them save much energy than the existing schemes. When there are 12 F-APs under small-cache scenarios, index-coded NOMA saves energy by 70.3% compared to traditional NOMA. [ABSTRACT FROM AUTHOR]

Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been recently considered as an effective tool for transmitter and receiver side subband filtering of OFDM-based waveforms. However, for the original continuous FC-based model, the filtering can, in general, be configured in time-direction only with the granularity of half subframe, corresponding to 7, 14, or 28 symbols with 15kHz, 30kHz, or 60kHz subcarrier spacing, respectively. In this paper, we present a symbol-synchronous FC-processing scheme flexibly allowing filter re-configuration with the time resolution equal to one OFDM symbol while supporting tight carrier-wise filtering for 5G NR in mixed-numerology scenarios with adjustable subcarrier spacings, center frequencies, and subband bandwidths, as well as providing co-existence with LTE. Proposed approach segments each stream of time-domain OFDM symbols into overlapping processing blocks of fixed size. Symbol synchronous processing is achieved by dynamically adjusting the overlap between the processing blocks while aligning the payload part of the processing blocks with the boundaries of the OFDM symbols. The proposed scheme is demonstrated to support the envisioned use cases of 5G NR and provide a flexible starting point for sixth generation (6G) development. [ABSTRACT FROM AUTHOR]

Remote entanglement distribution plays a crucial role in large-scale quantum networks, and the key enabler for entanglement distribution is quantum routers (or repeaters) that can extend the entanglement transmission distance. However, the performance of quantum routers is far from perfect yet. Amongst the causes, the limited quantum memories in quantum routers largely affect the rate and efficiency of entanglement distribution. To overcome this challenge, this paper presents a new modeling for the maximization of entanglement distribution rate (EDR) on a memory-limited path, which is then transformed into entanglement generation and swapping sub-problems. We propose a greedy algorithm for short-distance entanglement generation so that the quantum memories can be efficiently used. As for the entanglement swapping sub-problem, we model it using an Entanglement Graph (EG), whose solution is yet found to be at least NP-complete. In light of it, we propose a heuristic algorithm by dividing the original EG into several sub-problems, each of which can be solved using dynamic programming (DP) in polynomial time. By conducting simulations, the results show that our proposed scheme can achieve a high EDR, and the developed algorithm has a polynomial-time upper bound and reasonable average runtime complexity. [ABSTRACT FROM AUTHOR]

The existing relay-assisted terahertz (THz) wireless system is limited to dual-hop transmission with pointing errors and short-term fading without considering the shadowing effect. This paper analyzes the performance of a multihop-assisted backhaul communication mixed with an access link under the shadowed fading with antenna misalignment errors. We derive novel probability density and distribution functions of the signal-to-noise ratio (SNR) of the multihop link employing channel-assisted (CA) and fixed-gain (FG) amplify-and-forward (AF) relaying for each hop by considering independent but not identically distributed (i.ni.d) $\alpha $ - $\mu $ fading channel with pointing errors. We present analytical expressions for the outage probability and average bit-error-rate (ABER) and develop asymptotic analysis in high SNR regime to derive the diversity order for both CA-multihop and FG-multihop backhaul links. We use the derived results of the multihop systems to analyze the statistical performance of the integrated backhaul-access relaying for both uplink and downlink transmission considering the generalized- $K$ shadowed fading model in the access link. We also present exact and asymptotic expressions of the outage probability for the considered mixed system. We perform computer simulations to provide design and deployment aspects of employing multiple relays to enhance THz wireless transmissions. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of minimising latency in computation offloading with digital twin (DT) wireless edge networks for industrial Internet-of-Things (IoT) environment via ultra-reliable and low latency communications (URLLC) links. The considered DT-aided edge networks provide a powerful computing framework to enable computation-intensive services, where the DT is used to model the computing capacity of edge servers and optimise the resource allocation of the entire system. The objective function is comprised of local processing latency, URLLC-based transmission latency and edge processing latency, subject to both communication and computation resources budgets. In this regard, the minimum latency is obtained by jointly optimising the transmit power, user association, offloading portions, the processing rate of users and edge servers. The formulated problem is highly complicated due to complex non-convex constraints and strong coupling variables. To deal with this computationally intractable problem, we propose an iterative algorithm which decomposes the original problem into three sub-problems and resolve this problem in the fashion of alternating optimisation approach combined with an inner convex approximation framework. Simulation results demonstrate the effectiveness of the proposed method in reducing the latency compared with other benchmark schemes. [ABSTRACT FROM AUTHOR]

Mutualistic cooperative ambient backscatter communications (AmBC) have been proposed to improve the spectrum and energy efficiencies of Internet-of-Things (IoT) systems, where a primary link (from a primary transmitter to a primary receiver) and an AmBC link (from an IoT device to the same primary receiver) form a mutualism relationship. We note that hardware impairments (HIs), which are unavoidable in practical systems and may significantly affect the transmission rates of the primary and AmBC links and their mutualism relationships, have been largely ignored in the study of mutualistic cooperative AmBC networks. In this paper, we study a mutualistic cooperative AmBC network with HIs at all the active transceivers and a non-linear energy harvesting circuit at each IoT device. We derive closed-form rate expressions for both the AmBC and primary links and theoretically prove that the mutualism relationship between the AmBC and primary links is maintained under HIs, i.e., the rate of the primary link in the mutualistic cooperative AmBC network is still higher than that without the AmBC link. To maximize the weighted sum rate of all links in a cooperative AmBC network under HIs, we propose two resource allocation schemes for two scenarios with a single link and multiple AmBC links, respectively. For the single AmBC link case, we derive the optimal transmit power of the primary transmitter and the optimal power reflection coefficient of the IoT device in closed forms. For the scenario with multiple AmBC links, the weighted-sum-rate maximization problem is transformed into a convex one and solved with convex optimization tools. Computer simulations validate our theoretical results and that our proposed schemes outperform the benchmark schemes in terms of the weighted sum rate. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) can be deployed as flying base stations (BSs) to leverage the strength of line-of-sight connections and effectively support the coverage and throughput of wireless communication. This paper considers a multiuser communication system, in which a single-antenna UAV-BS serves a large number of ground users by employing non-orthogonal multiple access (NOMA). The max-min rate optimization problem is formulated under total power, total bandwidth, UAV altitude, and antenna beamwidth constraints. The objective of max-min rate optimization is non-convex in all optimization variables, i.e., UAV altitude, transmit antenna beamwidth, power allocation, and bandwidth allocation for multiple users. A path-following algorithm is proposed to solve the formulated problem. Next, orthogonal multiple access (OMA) and dirty paper coding (DPC)-based max-min rate optimization problems are formulated and respective path-following algorithms are developed to solve them. The numerical results show that NOMA outperforms OMA and achieves rates similar to those attained by DPC. In addition, a clear rate gain is observed by jointly optimizing all the parameters rather than optimizing a subset of parameters, which confirms the desirability of their joint optimization. [ABSTRACT FROM AUTHOR]

This paper presents novel numerical approaches to finding the secrecy capacity of the multiple-input multiple-output (MIMO) wiretap channel subject to multiple linear transmit covariance constraints, including sum power constraint, per antenna power constraints and interference power constraint. An analytical solution to this problem is not known and existing numerical solutions suffer from slow convergence rate and/or high per-iteration complexity. Deriving computationally efficient solutions to the secrecy capacity problem is challenging since the secrecy rate is expressed as a difference of convex functions (DC) of the transmit covariance matrix, for which its convexity is only known for some special cases. In this paper we propose two low-complexity methods to compute the secrecy capacity along with a convex reformulation for degraded channels. In the first method we capitalize on the accelerated DC algorithm which requires solving a sequence of convex subproblems, for which we propose an efficient iterative algorithm where each iteration admits a closed-form solution. In the second method, we rely on the concave-convex equivalent reformulation of the secrecy capacity problem which allows us to derive the so-called partial best response algorithm to obtain an optimal solution. Notably, each iteration of the second method can also be done in closed form. The simulation results demonstrate a faster convergence rate of our methods compared to other known solutions. We carry out extensive numerical experiments to evaluate the impact of various parameters on the achieved secrecy capacity. [ABSTRACT FROM AUTHOR]

This paper is concerned with the security problem of Time of Arrival (ToA) based localization schemes in a wireless sensor network (WSN) with multiple attackers and this paper focuses on defending against external attacks, especially under cooperative external attackers. The prior scheme for defending against the attacks in the localization scheme often introduce high communication overhead and their security relies on the capability of the attackers. In this paper, we propose a lightweight secure ToA-based localization scheme in a WSN by exploiting the noise feature caused by external distance attacks. In comparison with the prior scheme, our scheme provides lower communication overhead and a higher level of security. We theoretically analyze the performance of the proposed scheme over fading channels and derive the closed-form expressions. We implemented our scheme and conducted extensive performance comparisons through simulations. Our experimental results show that the closed-form expressions for the detection performance perfectly match with their simulation results as we expected. The communication overhead of the proposed scheme is saved by 72.8% than that of the prior scheme for different numbers of anchors and is independent of the times of measurements. [ABSTRACT FROM AUTHOR]

Clock synchronization is crucial for applications in wireless sensor networks, such as event scheduling and data fusion. In practical wireless networks, environmental changes cause the oscillator to be imperfect. Thus, it is necessary to track the nonlinear varying clock dynamically. In this paper, we propose a timestamp-free clock skew (frequency difference) and offset (time difference) joint tracking algorithm based on extended Kalman filter (EKF), which can be embedded into the general network data flow to achieve long-term synchronization without additional communication overhead. To further improve energy efficiency of clock synchronization, this paper develops an EKF clock skew tracking algorithm for silent nodes in receiver-only synchronization. For the situation that silent node overhears synchronization information from multiple active nodes, we present multi-information timestamp-free synchronization and multi-observation clock skew fusion scheme for silent nodes. Simulation results show the effectiveness of the proposed tracking algorithms. [ABSTRACT FROM AUTHOR]

This paper tackles the problem of joint active and passive beamforming optimization for an intelligent reflective surface (IRS)-assisted multi-user downlink multiple-input multiple-output (MIMO) communication system under both ideal and practical IRS phase shifts. We aim to maximize the spectral efficiency of the users by minimizing the sum mean square error (MSE) of the users’ received symbols. For this, a joint non-convex optimization problem is formulated under the sum minimum mean square error (MMSE) criterion. Alternating minimization is used to break the original joint optimization problem into the separate optimization of the active precoding matrix for the base station (BS) and the matrix of phase shifts for the IRS. While the MMSE active precoder is obtained in closed-form, the IRS phase shifts are optimized iteratively using a modified version (developed in this paper) of the vector approximate message passing (VAMP) algorithm. Moreover, the underlying joint optimization problem is solved under two different models for the IRS phase shifts, namely by assuming $i$) a unimodular (i.e., ideal) constraint on the reflection coefficients and $ii$) a more practical reflection elements termination by a variable reactive load (which inherently introduces the phase-dependent amplitude attenuation in the IRS phase shifts). Simulation results are presented to illustrate the performance of the proposed method under both perfect and imperfect channel state information (CSI) and to show the effect of the practical constraint on the system throughput. The results validate the superiority of the proposed method over the state-of-the-art techniques both in terms of throughput and computational complexity. [ABSTRACT FROM AUTHOR]

This paper studies an unmanned aerial vehicle (UAV)-assisted wireless powered IoT network, where a rotary-wing UAV adopts fly-hover-communicate protocol to successively visit IoT devices in demand. During the hovering periods, the UAV works on full-duplex mode to simultaneously collect data from the target device and charge other devices within its coverage. Practical propulsion power consumption model and non-linear energy harvesting model are taken into account. We formulate a multi-objective optimization problem to jointly optimize three objectives: maximization of sum data rate, maximization of total harvested energy and minimization of UAV’s energy consumption over a particular mission period. These three objectives are in conflict with each other partly and weight parameters are given to describe associated importance. Since IoT devices keep gathering information from the physical surrounding environment and their requirements to upload data change dynamically, online path planning of the UAV is required. In this paper, we apply deep reinforcement learning algorithm to achieve online decision. An extended deep deterministic policy gradient (DDPG) algorithm is proposed to learn control policies of UAV over multiple objectives. While training, the agent learns to produce optimal policies under given weights conditions on the basis of achieving timely data collection according to the requirement priority and avoiding devices’ data overflow. The verification results show that the proposed MODDPG (multi-objective DDPG) algorithm achieves joint optimization of three objectives and optimal policies can be adjusted according to weight parameters among optimization objectives. [ABSTRACT FROM AUTHOR]

Non-orthogonal multiple access (NOMA) is a promising candidate for future mobile networks as it enables improved spectral-efficiency, massive connectivity and low latency. This paper derives exact and asymptotic bit error rate (BER) expressions under Rayleigh fading channels for NOMA systems with arbitrary number of users and arbitrary number of receiving antennas and modulation orders, including binary phase-shift keying and rectangular/square quadrature amplitude modulation. Furthermore, the power coefficients’ bounds, which ensure users’ fairness, and solve the constellation ambiguity problem, are derived for $N=2$ and 3 users cases with any modulation orders. In addition, this paper determines the optimal power assignment that minimizes the system’s average BER. These results provide valuable insight into the system’s BER performance and power assignment granularity. For instance, it is shown that the feasible power coefficients range becomes significantly small as the modulation order, or $N$ , increases, where the BER performance degrades due to the increased inter-user interference. Hence, the derived expressions can be crucial for the system scheduler in allowing it to make accurate decisions of selecting appropriate $N$ , modulation orders, and power coefficients to satisfy the users’ requirements. The presented expressions are corroborated via Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

This paper applies machine learning to optimize the transmission policies of cognitive radio inspired non-orthogonal multiple access (CR-NOMA) networks, where time-division multiple access (TDMA) is used to serve multiple primary users and an energy-constrained secondary user is admitted to the primary users’ time slots via NOMA. During each time slot, the secondary user performs the two tasks: data transmission and energy harvesting based on the signals received from the primary users. The goal of the paper is to maximize the secondary user’s long-term throughput, by optimizing its transmit power and the time-sharing coefficient for its two tasks. The long-term throughput maximization problem is challenging due to the need for making decisions that yield long-term gains but might result in short-term losses. For example, when in a given time slot, a primary user with large channel gains transmits, intuition suggests that the secondary user should not carry out data transmission due to the strong interference from the primary user but perform energy harvesting only, which results in zero data rate for this time slot but yields potential long-term benefits. In this paper, a deep reinforcement learning (DRL) approach is applied to emulate this intuition, where the deep deterministic policy gradient (DDPG) algorithm is employed together with convex optimization. Our simulation results demonstrate that the proposed DRL assisted NOMA transmission scheme can yield significant performance gains over two benchmark schemes. [ABSTRACT FROM AUTHOR]

Cloud radio access networks (C-RAN) enable a network platform for beyond the fifth generation of communication networks (B5G), which incorporates the advances in cloud computing technologies to modern radio access networks. Recently, rate splitting multiple access (RSMA), relying on multi-antenna rate splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers, has been shown to manage the interference in multi-antenna communication networks efficiently. This paper considers applying RSMA in C-RAN. We address the practical challenge of a transmitter that only knows the statistical channel state information (CSI) of the users. To this end, the paper investigates the problem of stochastic coordinated beamforming (SCB) optimization to maximize the ergodic sum-rate (ESR) in the network. Furthermore, we propose a scalable and robust RS scheme where the number of the common streams to be decoded at each user scales linearly with the number of users, and the common stream selection only depends on the statistical CSI. The setup leads to a challenging stochastic and non-convex optimization problem. A sample average approximation (SAA) and weighted minimum mean square error (WMMSE) based algorithm is adopted to tackle the intractable stochastic non-convex optimization and guarantee convergence to a stationary point asymptotically. The numerical simulations demonstrate the efficiency of the proposed RS strategy and show a gain up to 27% in the achievable ESR compared with state-of-the-art schemes, namely treating interference as noise (TIN) and non-orthogonal multiple access (NOMA) schemes. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel optimization model for multiple Unmanned Aerial Vehicles (UAVs) working simultaneously as relays to help two set of ground users; namely relay users and device-to-device (D2D) users. The relay users are assumed out communication rages from each other and use the UAV link to for their data transmission. While the D2D users are assumed to be nearby users and use the UAV for managing the resources without being involved in the transmission. The goal of the paper is to operate the UAVs in an energy-efficient manner to support the different set of users by i) optimizing the available bandwidth and power allocations of the D2D links, and ii) acting as relays when needed to maintain the communication links between relay users. We formulate an optimization problem that maximizes the throughput-energy utility while respecting the resource availability including the UAVs’ energy consumption, UAV-user association, and trajectory constraints. Due to the non-convexity of the problem, we propose to solve it in three steps using Taylor series approximation. Firstly, we optimize the transmit power of the UAVs and users. Then, we optimize the bandwidth allocation for a given transmit power values. Finally, an efficient heuristic algorithm based on a recursive shrink-and-realign process is proposed to optimize the UAVs’ trajectories. The performance of the proposed method shows advantages in terms of average throughput compared to the fixed power and bandwidth solutions. [ABSTRACT FROM AUTHOR]

A memoryless bivariate Gaussian source is transmitted to a pair of receivers over an average-power limited bandwidth-matched Gaussian broadcast channel. Based on their observations, Receiver 1 reconstructs the first source component while Receiver 2 reconstructs the second source component both seeking to minimize the expected squared-error distortions. In addition to the source transmission digital information at a specified rate should be conveyed reliably to Receiver 1–the “stronger” receiver. Given the message rate we characterize the achievable distortions region. Specifically, there is an ${\sf SNR}$ -threshold below which Dirty Paper coding of the digital information against a linear combination of the source components is optimal. The threshold is a function of the digital information rate, the source correlation and the distortion at the “stronger” receiver. Above this threshold a Dirty Paper coding extension of the Tian-Diggavi-Shamai hybrid scheme is shown to be optimal. [ABSTRACT FROM AUTHOR]

This paper presents a part of our ground-breaking work on evaluation of buildings in terms of wireless friendliness at the building-design stage. The main goal is to devise building design practices that provide for a good performance of wireless networks deployed in buildings. In this paper, the interference gain (IG) and power gain (PG) are defined as two figures of merit (FoM) of the wireless performance of buildings. The FoMs bridge the gap between building design and wireless communications industries. An approach to derive exact closed-form equations for these FoMs is proposed for the first time. The derived analytic expressions facilitate straightforward and more computationally efficient numerical evaluation of the proposed FoMs as compared to Monte Carlo simulations for well-known indoor propagation models. It is shown that the derived closed-form expression can be readily employed to evaluate the impact of building properties, such as the sizes and the aspect ratios (ARs) of rooms, on the wireless performance. The proposed approach sheds light to architects on evaluation and design of wireless-friendly building layouts. [ABSTRACT FROM AUTHOR]

Due to the continuous advancements of orthogonal frequency division multiplexing (OFDM) and multiple antenna techniques, multiuser multiple input multiple output (MU-MIMO) OFDM is a key enabler of both fourth and fifth generation networks. In this paper, we consider the problem of weighted sum-rate maximization under latency constraints in finite buffer multicell MU-MIMO OFDM systems. Unlike previous works, the optimization variables include the transceiver beamforming vectors, the scheduled packet size and the resources in the frequency and power domains. This problem is motivated by the observation that multicell MU-MIMO OFDM systems serve multiple quality of service classes and the system performance depends critically on both the transceiver design and the scheduling algorithm. Since this problem is non-convex, we resort to the max-plus queuing method and successive convex approximation. We propose both centralized and decentralized solutions, in which practical design aspects, such as signaling overhead, are considered. Finally, we compare the proposed framework with state-of-the-art algorithms in relevant scenarios, assuming a realistic channel model with space, frequency and time correlations. Numerical results indicate that our design provides significant gains over designs based on the wide-spread saturated buffers assumption, while also outperforming algorithms that consider a finite-buffer model. Due to the continuous advancements of orthogonal frequency division multiplexing (OFDM) and multiple antenna techniques, multiuser multiple input multiple output (MU-MIMO) OFDM is a key enabler of both fourth and fifth generation networks. In this paper, we consider the problem of weighted sum-rate maximization under latency constraints in finite buffer multicell MU-MIMO OFDM systems. Unlike previous works, the optimization variables include the transceiver beamforming vectors, the scheduled packet size and the resources in the frequency and power domains. This problem is motivated by the observation that multicell MU-MIMO OFDM systems serve multiple quality of service classes and the system performance depends critically on both the transceiver design and the scheduling algorithm. Since this problem is non-convex, we resort to the max-plus queuing method and successive convex approximation. We propose both centralized and decentralized solutions, in which practical design aspects, such as signaling overhead, are considered. Finally, we compare the proposed framework with state-of-the-art algorithms in relevant scenarios, assuming a realistic channel model with space, frequency and time correlations. Numerical results indicate that our design provides significant gains over designs based on the wide-spread saturated buffers assumption, while also outperforming algorithms that consider a finite-buffer model. [ABSTRACT FROM AUTHOR]

In this paper, we present a low-complexity recursive approach for massive and scalable code-domain nonorthogonal multiple access (NOMA) with applications to emerging low-capacity scenarios. The problem definition in this paper is inspired by three major requirements of the next generations of wireless networks. Firstly, the proposed scheme is particularly beneficial in low-capacity regimes which is important in practical scenarios of utmost interest such as the Internet-of-Things (IoT) and massive machine-type communication (mMTC). Secondly, we employ code-domain NOMA to efficiently share the scarce common resources among the users. Finally, the proposed recursive approach enables code-domain NOMA with low-complexity detection algorithms that are scalable with the number of users to satisfy the requirements of massive connectivity. To this end, we propose a novel encoding and decoding scheme for code-domain NOMA based on factorizing the pattern matrix, for assigning the available resource elements to the users, as the Kronecker product of several smaller factor matrices. As a result, both the pattern matrix design at the transmitter side and the mixed symbols’ detection at the receiver side can be performed over matrices with dimensions that are much smaller than the overall pattern matrix. Consequently, this leads to significant reduction in both the complexity and the latency of the detection. We present the detection algorithm for the general case of factor matrices. The proposed algorithm involves several recursions each involving certain sets of equations corresponding to a certain factor matrix. We then characterize the system performance in terms of average sum rate, latency, and detection complexity. Our latency and complexity analysis confirm the superiority of our proposed scheme in enabling large pattern matrices. Moreover, our numerical results for the average sum rate show that the proposed scheme provides better performance compared to straightforward code-domain NOMA with comparable complexity, especially at low-capacity regimes. [ABSTRACT FROM AUTHOR]

In conventional hybrid beamforming approaches, the number of radio-frequency (RF) chains is the bottleneck on the achievable spatial multiplexing gain. Recent studies have overcome this limitation by increasing the update-rate of the RF beamformer. This paper presents a framework to design and evaluate such approaches, which we refer to as agile RF beamforming, from theoretical and practical points of view. In this context, we consider the impact of the number of RF-chains, phase shifters’ speed, and resolution to design agile RF beamformers. Our analysis and simulations indicate that even an RF-chain-free transmitter, which its beamformer has no RF-chains, can provide a promising performance compared with fully-digital systems and significantly outperform the conventional hybrid beamformers. Then, we show that the phase shifter’s limited switching speed can result in signal aliasing, in-band distortion, and out-of-band emissions. We introduce performance metrics and approaches to measure such effects and compare the performance of the proposed agile beamformers using the Gram-Schmidt orthogonalization process. Although this paper aims to present a generic framework for deploying agile RF beamformers, it also presents extensive performance evaluations in communication systems in terms of adjacent channel leakage ratio, sum-rate, power efficiency, error vector magnitude, and bit-error rates. [ABSTRACT FROM AUTHOR]

The next generation Internet of Things (IoT) exhibits a unique feature that IoT devices have different energy profiles and quality of service (QoS) requirements. In this paper, two energy and spectrally efficient transmission strategies, namely wireless power transfer assisted non-orthogonal multiple access (WPT-NOMA) and backscatter communication (Back-Com) assisted NOMA (BAC-NOMA), are proposed by utilizing this feature of IoT and employing spectrum and energy cooperation among the devices. In particular, the use of NOMA ensures that the devices with different QoS requirements can share the same spectrum, and WPT and Back-Com are employed to utilize the cooperation among the devices with different energy profiles, which avoids the use of a dedicated power beacon. Furthermore, for the proposed WPT-NOMA scheme, the application of hybrid successive interference cancelation (SIC) decoding order is also considered, and analytical results are developed to demonstrate that WPT-NOMA can avoid outage probability error floors and realize the full diversity gain. Unlike WPT-NOMA, BAC-NOMA suffers from an outage probability error floor, and the asymptotic behavior of this error floor is analyzed in the paper by applying the extreme value theory. In addition, the effect of a unique feature of BAC-NOMA, i.e., employing one device’s signal as the carrier signal for another device, is studied, and its impact on the diversity gain is revealed. Simulation results are also provided to compare the performance of the proposed strategies and verify the developed analytical results. [ABSTRACT FROM AUTHOR]

Being a key technology for beyond fifth-generation wireless systems, joint communication and radar sensing (JCAS) utilizes the reflections of communication signals to detect foreign objects and deliver situational awareness. A cellular-connected unmanned aerial vehicle (UAV) is uniquely suited to form a mobile bistatic synthetic aperture radar (SAR) with its serving base station (BS) to sense over large areas with superb sensing resolutions at no additional requirement of spectrum. This paper designs this novel BS-UAV bistatic SAR platform, and optimizes the flight path of the UAV to minimize its propulsion energy and guarantee the required sensing resolutions on a series of interesting landmarks. A new trajectory planning algorithm is developed to convexify the propulsion energy and resolution requirements by using successive convex approximation and block coordinate descent. Effective trajectories are obtained with a polynomial complexity. Extensive simulations reveal that the proposed trajectory planning algorithm outperforms significantly its alternative that minimizes the flight distance of cellular-aided sensing missions in terms of energy efficiency and effective consumption fluctuation. The energy saving offered by the proposed algorithm can be as significant as 55%. [ABSTRACT FROM AUTHOR]

In this paper, two new families of asynchronous channel-hopping (CH) sequences—Symmetric Maximum-Length CH (SML-CH) Sequences and Relaxed Difference Set (RDS) of Maximum-Length CH (RDSML-CH) Sequences—are constructed. For the first time, the maximum-length sequences (also called as m-sequences) are used to create 2-D CH matrices with a reduced number of “jump” columns. The two new constructions carry the desirable properties of maximum rendezvous diversity (MRD) and even channel use (ECU) and, more importantly, have the shortest periods in their categories of constructions. Another contribution is on the embedment of optical orthogonal codes (OOCs) to eliminate “stay” columns in the RDSML-CH matrices, thus resulting in the first and only family of the asynchronous CH sequences that can asymptotically achieve the theoretical period lower bound. To support the RDSML-CH construction, a new shortened RDS algorithm for creating the OOCs with smaller weight-to-length ratios than the existing ones is proposed. Numerical and simulation analyses show that the two new constructions have a good balance of short period, MRD, ECU, short time-to-rendezvous (TTR) mean, small TTR variance, and short maximum-TTR, thus more suitable for practical CR wireless networks than the existing constructions. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for millimeter wave (mmWave) networks. In this paper, we utilize tools from stochastic geometry to study the performance of a RIS-assisted mmWave cellular network. Specifically, the locations of the base stations (BSs) and the midpoints of the blockage are modeled as two independent Poisson point processes (PPPs), where the blockages are modeled by a Boolean model and a fraction of the blockages are coated with RISs. The particular characteristics of mmWave communications, i.e., directional beamforming and different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) propagation, are incorporated into our analysis. We derive analytical expressions for the success probability and the area spectral efficiency. The success probability under the special case where the blockage parameter is sufficiently small is also derived. Numerical results demonstrate that better coverage performance and higher energy efficiency can be achieved by a large-scale deployment of RISs. In addition, the tradeoff between the BS and RIS densities is investigated and the results show that the RISs can indeed enable the traditional networks to improve the success probability, especially for the cell-edge region, with limited power consumption. [ABSTRACT FROM AUTHOR]