Search

Full-duplex (FD) jamming transceivers recently have been shown to enhance the information security of wireless communication systems by simultaneously transmitting artificial noise (AN) while receiving information. In this paper, we investigate whether FD jamming can also improve the system’s secrecy energy efficiency (SEE) in terms of securely communicated bits per Joule when considering the additional power used for jamming and self-interference (SI) cancellation. Moreover, the degrading effect of the residual SI is also taken into account. In this regard, we formulate a set of SEE maximization problems for a FD multiple-input-multiple-output multiple-antenna eavesdropper (MIMOME) wiretap channel, considering both cases where exact or statistical channel state information (CSI) is available. Due to the intractable problem structure, we propose iterative solutions in each case with a proven convergence to a stationary point. Numerical simulations indicate only a marginal SEE gain, through the utilization of FD jamming, for a wide range of system conditions. However, when SI can efficiently be mitigated, the observed gain is considerable for scenarios with a small distance between the FD node and the eavesdropper, a high signal-to-noise ratio (SNR), or for a bidirectional FD communication setup. [ABSTRACT FROM AUTHOR]

Multi-channel (MC) optical wireless communication (OWC) systems employing wave-division multiplexing for outdoors free-space optical communications, or multi-user time-division multiple access for indoors visible-light communications, e.g., can be modeled as parallel channels. Multi-input multi-output OWC systems can also be transformed, possibly with some performance loss, to parallel channels using pre-/post-coding. Studying the performance of such MC-OWC systems requires characterizing the capacity of the underlying parallel channels. In this paper, upper and lower bounds on the capacity of constant parallel OWC channels with a total average intensity constraint are derived. Then, this paper focuses on finding intensity allocations that maximize the lower bounds given channel-state information at the transmitter (CSIT). Due to its nonconvexity, the Karush–Kuhn–Tucker conditions are used to describe a list of candidate allocations. Instead searching exhaustively for the best solution, low-complexity near-optimal algorithms are proposed. The resulting optimized lower bound nearly coincides with capacity at high signal-to-noise ratio (SNR). Under a quasi-static channel model and in the absence of CSIT, outage probability upper and lower bounds are derived. Those bounds also meet at high SNR, thus characterizing the outage capacity in this regime. Finally, the results are extended to a system with both average and peak intensity constraints. [ABSTRACT FROM PUBLISHER]

This paper considers a wireless communication network consisting of multiple interfering multicast sessions. Different from a unicast system where each transmitter has only one receiver, in a multicast system, each transmitter has multiple receivers and broadcasts a common message to all of them. It is a well-known result for wireless unicast systems that the feasibility of a signal-to-interference-plus-noise power ratio (SINR) without power constraint is decided by the spectral radius of a nonnegative matrix. We generalize this result and obtain necessary and sufficient conditions for the feasibility of an SINR in a wireless multicast system with and without power constraint. The feasible SINR region and its geometric properties are studied. Besides, an iterative algorithm is proposed, which can efficiently check the feasibility condition and compute the boundary points of the feasible SINR region. [ABSTRACT FROM AUTHOR]

In this paper, we propose an imperfect quantized feedback-based diagonal precoding scheme for generalized orthogonal space-time block codes in an $N \times 1$ multiple-input single-output (MISO) wireless communication system employing $M$ -QAM constellation. It is well known that a feedback-based precoding scheme aids channel adaptive signaling in wireless communication system and capitulates large improvements in almost all performance metrics. However, a practical feedback link is susceptible to error due to wireless channel fading and leads to wrong precoder selection. Therefore, a signal-to-noise ratio (SNR) adaptive error-tolerant weighting scheme is introduced which provides significant gain in comparison with another proposed arbitrarily fixed SNR error-tolerant weighting scheme. At first, a tight approximate closed-form expression of average symbol-error-rate (SER) and an exact analytical expression of outage probability are derived under imperfect feedback information with the help of order statistics. By minimizing the derived average SER, optimized transmit weights for the diagonal precoding matrix (based on feedback bits) are obtained. Later, a closed-form expression of the ergodic capacity with erroneous feedback bits for arbitrary MISO system is also provided by using the moment generating function approach. Further, numerical results show that the considered error-tolerant schemes outperform the uniform power allocation scheme in term of all the investigated performance metrics. [ABSTRACT FROM AUTHOR]

Considering a dual-hop energy-harvesting (EH) relaying system, this paper advocates novel relaying protocols based on adaptive time-switching (TS) for amplify-and-forward and decode-and-forward modes, respectively. The optimal TS factor is first studied, which is adaptively adjusted based on the dual-hop channel state information (CSI), accumulated energy, and threshold signal-to-noise ratio (SNR), to achieve the maximum throughput efficiency per block. To reduce the CSI overhead at the EH relay, a low-complexity TS factor design is presented, which only needs single-hop CSI to determine the TS factor. Theoretical results show that, in comparison with the conventional solutions, the proposed optimal/low-complexity TS factor can achieve higher limiting throughput efficiency for sufficiently small threshold SNR. As the threshold SNR approaches infinity, the throughput efficiency of the proposed optimal/low-complexity TS factor tends to zero in a much slower pace than that of the conventional solutions. Simulation results are presented to corroborate the proposed methodology. [ABSTRACT FROM PUBLISHER]

Compute-and-forward (C&F) is a promising new approach to interference management, enjoying several advantages over other information-theoretic schemes. C&F usually requires channel state information (CSI) at the receivers so that an “optimal” scaling factor can be computed for the purposes of decoding. In this paper, a blind C&F scheme—i.e., one not requiring CSI—is developed. Rather than attempting to compute the optimal scaling factor, this new scheme seeks one or more “good” scalars, i.e., scalars that allow correct decoding despite possibly being suboptimal. The region of all such good scalars is characterized. To find a good scalar, a computationally efficient scheme is proposed which involves error-detection, a hierarchically organized list, as well as a use of the smoothing lemma from lattice theory. Simulation results show that our blind C&F scheme achieves—for a class of nested lattice codes—the same throughput as its CSI-enabled counterpart at the expense of, approximately, a two-fold increase in computational complexity in the high-throughput region. Moreover, our blind C&F scheme can be applied to multisource multirelay networks with a good performance/complexity tradeoff. [ABSTRACT FROM AUTHOR]

IEEE 802.11 wireless network supports multiple link rates at the physical layer. Each link rate is associated with a certain required Signal-to-Interference-and-Noise Ratio (SINR) threshold for successfully decoding received packets. On transmission failures, the 802.11 DCF performs a binary exponential backoff mechanism to discourage channel access attempts, hoping to reduce congestion. When traditional link adaptation is applied, both rate reduction and binary backoff represent double penalties for this wireless link, which may cause overly conservative transmission attempts. On the other hand, once transmission succeeds, 802.11 DCF resets the backoff contention window to the minimum value to encourage channel access attempts. At the same time, traditional link adaptation may also decide to increase the data rate, which leads to overly aggressive transmission attempts. We observe this improper interaction of link rate and backoff mechanism that harms the 802.11 system performance, due to separate consideration of those two parameters. In this paper, we propose to jointly adapt the rate and backoff parameters. Specifically, an Enhanced Adaptation of link Rate and Contention window, abbreviated as EARC, is devised. EARC is a closed-loop (receiver-assisted) link rate adaptation protocol that jointly considers the backoff mechanism. With only one extra byte carried by the DATA packet, EARC incurs little controlling overhead despite its receiver-assisted nature. Moreover, since SINR information commonly utilized by receiver-assisted protocols is not precisely supported in real devices, we introduce a rate selection reference (RSR) table empirically derived by constantly monitoring the environmental energy level and reception behavior. The RSR table then guides the receiver to select the best sustainable rate for the transmitter. Simulation results demonstrate the RSR table is a practical option for making the rate decision, and the proposed EARC approach is effective in maintaining high system throughput, compared to other link adaptation algorithms. [ABSTRACT FROM PUBLISHER]

Analysis of the average binary error probabilities (ABEP) and average capacity (AC) of wireless communications systems over generalized fading channels have been considered separately in past years. This paper introduces a novel moment generating function (MGF)-based unified expression for the ABEP and AC of single and multiple link communications with maximal ratio combining. In addition, this paper proposes the hyper-Fox's H fading model as a unified fading distribution of a majority of the well-known generalized fading environments. As such, the authors offer a generic unified performance expression that can be easily calculated, and that is applicable to a wide variety of fading scenarios. The mathematical formulism is illustrated with some selected numerical examples that validate the correctness of the authors' newly derived results. [ABSTRACT FROM AUTHOR]

The multi-path effect makes high speed broadband communications a very challenging task due to the severe inter-symbol interference (ISI). By concentrating energy in both the spatial and temporal domains, time-reversal (TR) transmission technique provides a great potential of low-complexity energy-efficient communications. In this paper, a novel concept of time-reversal division multiple access (TRDMA) is proposed as a wireless channel access method based on its high-resolution spatial focusing effect. It is proposed to use TR structure in multi-user downlink systems over multi-path channels, where signals of different users are separated solely by TRDMA. Both the single-transmit-antenna scheme and its enhanced version with multiple transmit antennas are developed and evaluated in this paper. The system performance is investigated in terms of its effective signal-to-interference-plus-noise ratio (SINR), the achievable sum rate and the achievable rates with outage. And some further discussions regarding its advantage over conventional rake receivers and the impact of spatial correlations between users are given at the end of this paper. It is shown in both analytical and simulation results that desirable properties and satisfying performances can be achieved in the proposed TRDMA multi-user downlink system, which makes TRDMA a promising candidate for future energy-efficient low-complexity broadband wireless communications. [ABSTRACT FROM AUTHOR]