Search

This paper aims to derive expressions of the downlink ergodic user rates in a multi-cell large-scale multi-user multiple-input single-output (MISO) system under the assumption that each base station (BS) employs maximum ratio transmission (MRT) precoding and that single-antenna users in each cell are divided into groups, where channels of users in the same group share common covariance matrices and follow the double scattering channel model. Moreover, both channel estimation errors and pilot contamination effects caused by re-use of pilot sequences in neighboring cells are taken into consideration in this work. The analysis is carried out using statistical tools under the exact and asymptotic regimes in which the number of antennas at BS $N$ , the number of users in each cell $K$ , and the number of scatterers $S$ grow large at the same pace. Furthermore, the obtained exact expressions and deterministic approximations of the ergodic rates are expressed in simplified closed-forms under the special case of multi-keyhole channels to yield useful insights. They reveal that signal-to-noise plus interference ratio (SINR) without user grouping in a multi-keyhole channel is similar to that under standard Rayleigh channel in the asymptotic regime. However, under user grouping, we show that the massive multiple-input multiple-output (MIMO) gains promised by deploying large-scale antenna arrays in multi-cell settings are limited by the number of scatterers even if the number of antennas grows large. Simulation results illustrate the close match provided by the asymptotic analysis for moderate system dimensions and confirm the insights drawn from the theoretical findings. [ABSTRACT FROM AUTHOR]

Hardware distortions (HWDs) render drastic effects on the performance of communication systems. They are recently proven to bear asymmetric signatures; and hence can be efficiently mitigated using improper Gaussian signaling (IGS), thanks to its additional design degrees of freedom. Discrete asymmetric signaling (AS) can practically realize the IGS by shaping the signals’ geometry or probability. In this paper, we adopt the probabilistic shaping (PS) instead of uniform symbols to mitigate the impact of HWDs and derive the optimal maximum a posterior detector. Then, we design the symbols’ probabilities to minimize the error rate performance while accommodating the improper nature of HWD. Although the design problem is a non-convex optimization problem, we simplified it using successive convex programming and propose an iterative algorithm. We further present a hybrid shaping (HS) design to gain the combined benefits of both PS and geometric shaping (GS). Finally, extensive numerical results and Monte Carlo (MC) simulations highlight the superiority of the proposed PS over conventional uniform constellation and GS. Both PS and HS achieve substantial improvements over the traditional uniform constellation and GS with up to one order magnitude in error probability and throughput. [ABSTRACT FROM AUTHOR]

Ambient radio frequency (RF) energy harvesting is widely promoted as an enabler for wireless-power Internet of Things (IoT) networks. This article jointly characterizes energy harvesting and packet transmissions in grant-free opportunistic uplink IoT networks energized via harvesting downlink energy. To do that, a joint queuing theory and stochastic geometry model is utilized to develop a spatio-temporal analytical model. Particularly, the harvested energy and packet transmission success probability are characterized using tools from stochastic geometry. Moreover, each device is modeled using a two-dimensional discrete-time Markov chain (DTMC). Such two dimensions are utilized to jointly track the scavenged/depleted energy to/from the batteries along with the arrival/departure of packets to/from devices buffers over time. Consequently, the adopted queuing model represents the devices as spatially interacting queues. To that end, the network performance is assessed in light of the packet throughput, the average delay, and the average buffer size. The effect of base stations (BSs) densification is discussed and several design insights are provided. The results show that the parameters for uplink power control and opportunistic channel access should be jointly optimized to maximize average network packet throughput, and hence, minimize delay. [ABSTRACT FROM AUTHOR]

This paper analyzes the integration of Non-Orthogonal Multiple Access (NOMA) in a Fog Radio Access Network (FRAN) architecture with limited fronthaul capacity. More precisely, it proposes methods for optimizing the resource allocation for the downlink of a NOMA-based FRAN with multiple resource blocks (RB). The resource allocation problem is formulated as a mixed-integer optimization problem, which determines the user-to-RB assignment, the power allocated to each RB, and the power split levels of the NOMA users served by each RB. The optimization problem maximizes a network-wide rate-based utility function subject to fronthaul-capacity constraints. The paper proposes a feasible decoupled solution for such a non-convex optimization problem using a three-step hybrid centralized/distributed approach, which in part relies on the edge-devices computation capabilities. The paper proposes and compares two distinct methods for solving the assignment problem, namely a Hungarian-based method, and a Multiple Choice Knapsack-based method. The power allocation to RBs and the NOMA power split optimization are solved using the alternating direction method of multipliers (ADMM). Simulations results illustrate the advantages of the proposed methods compared to different baseline schemes, including the conventional Orthogonal Multiple Access (OMA), for different utility functions and different network environments. [ABSTRACT FROM AUTHOR]

The explosive data traffic and connections in 5G networks require the use of non-orthogonal multiple access (NOMA) to accommodate more users. Unmanned aerial vehicle (UAV) can be exploited with NOMA to improve the situation further. In this paper, we propose a UAV-assisted NOMA network, in which the UAV and base station (BS) cooperate with each other to serve ground users simultaneously. The sum rate is maximized by jointly optimizing the UAV trajectory and the NOMA precoding. To solve the optimization, we decompose it into two steps. First, the sum rate of the UAV-served users is maximized via alternate user scheduling and UAV trajectory with its interference to the BS-served users below a threshold. Then, the optimal NOMA precoding vectors are obtained using two schemes with different constraints. The first scheme intends to cancel the interference from the BS to the UAV-served user, while the second one restricts the interference to a given threshold. In both schemes, the non-convex optimization problems are converted into tractable ones. An iterative algorithm is designed. Numerical results are provided to evaluate the effectiveness of the proposed algorithms for the hybrid NOMA and UAV network. [ABSTRACT FROM AUTHOR]

In this paper, we consider a non-ideal successive interference cancellation receiver-based imperfect non-orthogonal multiple access (NOMA) schemes whose performance is limited by three factors: 1) power disparity & sensitivity constraints; 2) intra-cluster interference (ICRI); and 3) intercell-interference (ICI). By quantifying the residual interference with a fractional error factor (FEF), we show that NOMA cannot always perform better than orthogonal multiple access (OMA) especially under certain receiver sensitivity and FEF levels. Assuming the existence of an offline/online ICI management scheme, the proposed solution accounts for the ICI which is shown to deteriorate the NOMA performance particularly when it becomes significant compared to the ICRI. Then, a distributed cluster formation (CF) and power-bandwidth allocation (PBA) approach are proposed for downlink heterogeneous networks (HetNets) operating on the imperfect NOMA. We develop a hierarchically distributed solution methodology, where BSs independently form clusters and distributively determine the power-bandwidth allowance of each cluster. A generic CF scheme is obtained by creating a multi-partite graph via partitioning user equipment with respect to their channel gains since NOMA performance is primarily determined by the channel gain disparity of cluster members. A sequential weighted bi-partite matching method is proposed for solving the resulted weighted multi-partite matching problem. Thereafter, we present a hierarchically distributed PBA approach which consists of the primary master, secondary masters, and slave problems. For a given cluster power and bandwidth pair, optimal power allocations and Lagrange multipliers of slave problems are derived in closed-form. While power allowance of clusters is updated by the secondary masters based on dual variables of slave problems, bandwidth proportions of clusters are iteratively allocated by the primary master as per the utility achieved by the secondary masters at the previous iteration. Finally, the proposed CF and PBA approaches under the operation of imperfect NOMA are investigated and compared to the OMA scheme by extensive simulations results in DL-HetNets. [ABSTRACT FROM AUTHOR]

A network model is considered, where Poisson distributed base stations transmit to $N$ power-domain non-orthogonal multiple access (NOMA) users (UEs) each that employ successive interference cancellation (SIC) for decoding. We propose three models for the clustering of NOMA UEs and consider two different ordering techniques for the NOMA UEs: mean signal power-based and instantaneous signal-to-intercell-interference-and-noise-ratio-based. For each technique, we present a signal-to-interference-and-noise ratio analysis for the coverage of the typical UE. We plot the rate region for the two-user case and show that neither ordering technique is consistently superior to the other. We propose two efficient algorithms for finding a feasible resource allocation that maximize the cell sum rate $\mathcal {R}_{\mathrm{ tot}}$ , for general $N$ , constrained to: 1) a minimum throughput $\mathcal {T}$ for each UE, 2) identical throughput for all UEs. We show the existence of: 1) an optimum $N$ that maximizes the constrained $\mathcal {R}_{\mathrm{ tot}}$ given a set of network parameters and 2) a critical SIC level necessary for NOMA to outperform orthogonal multiple access. The results highlight the importance in choosing the network parameters $N$ , the constraints, and the ordering technique to balance the $\mathcal {R}_{\mathrm{ tot}}$ and fairness requirements. We also show that interference-aware UE clustering can significantly improve performance. [ABSTRACT FROM AUTHOR]

This paper develops an interference aware design for cooperative hybrid automatic repeat request (HARQ)-assisted non-orthogonal multiple access (NOMA) scheme for large-scale device-to-device (D2D) networks. Specifically, interference aware rate selection and power allocation are considered to maximize long term average throughput (LTAT) and area spectral efficiency. The design framework is based on stochastic geometry that jointly accounts for the spatial interference correlation at the NOMA receivers as well as the temporal interference correlation across HARQ transmissions. It is found that ignoring the effect of the aggregate interference, or overlooking the spatial and temporal correlation in interference, highly overestimates the NOMA performance and produces misleading design insights. An interference oblivious selection for the power and/or transmission rates leads to violating the network outage constraints. To this end, the results demonstrate the effectiveness of NOMA transmission and manifest the importance of the cooperative HARQ to combat the negative effect of the network aggregate interference. For instance, comparing to the non-cooperative HARQ-assisted NOMA, the proposed scheme can yield an outage probability reduction by 21%. Furthermore, an interference aware optimal design that maximizes the LTAT given outage constraints leads to 17% throughput improvement over HARQ-assisted orthogonal multiple access scheme. [ABSTRACT FROM AUTHOR]

We study the potential employment of improper Gaussian signaling (IGS) in full-duplex relaying (FDR) with non-negligible residual self-interference (RSI) under Nakagami- $m$ fading. IGS is recently shown to outperform traditional proper Gaussian signaling (PGS) in several interference-limited settings. In this paper, IGS is employed as an attempt to alleviate RSI. We use two performance metrics, namely, the outage probability and the ergodic rate. First, we provide upper and lower bounds for the system performance in terms of the relay transmit power and circularity coefficient, a measure of the signal impropriety. Then, we numerically optimize the relay signal parameters based only on the channel statistics to improve the system performance. Based on the analysis, IGS allows FDR to operate even with high RSI. The results show that IGS can leverage higher power budgets to enhance the performance, meanwhile it relieves RSI impact via tuning the signal impropriety. Interestingly, 1-D optimization of the circularity coefficient, with maximum relay power, offers a similar performance as the joint optimization, which reduces the optimization complexity. From a throughput standpoint, it is shown that IGS-FDR can outperform not only PGS-FDR, but also half-duplex relaying with/without maximum ratio combining over certain regions of the target source rate. [ABSTRACT FROM AUTHOR]

Recent studies on cloud-radio access networks assume either signal-level or scheduling-level coordination. This paper considers a hybrid coordinated scheme as a means to benefit from both policies. Consider the downlink of a multi-cloud radio access network, where each cloud is connected to several base-stations (BSs) via high capacity links and, therefore, allows for joint signal processing within the cloud transmission. Across the multiple clouds, however, only scheduling-level coordination is permitted, as low levels of backhaul communication are feasible. The frame structure of every BS is composed of various time/frequency blocks, called power-zones (PZs), which are maintained at a fixed power level. This paper addresses the problem of maximizing a network-wide utility by associating users to clouds and scheduling them to the PZs, under the practical constraints that each user is scheduled to a single cloud at most, but possibly to many BSs within the cloud, and can be served by one or more distinct PZs within the BSs’ frame. This paper solves the problem using graph theory techniques by constructing the conflict graph. The considered scheduling problem is, then, shown to be equivalent to a maximum-weight independent set problem in the constructed graph, which can be solved using efficient techniques. This paper then proposes solving the problem using both optimal and heuristic algorithms that can be implemented in a distributed fashion across the network. The proposed distributed algorithms rely on the well-chosen structure of the constructed conflict graph utilized to solve the maximum-weight independent set problem. Simulation results suggest that the proposed optimal and heuristic hybrid scheduling strategies provide appreciable gain as compared with the scheduling-level coordinated networks, with a negligible degradation to signal-level coordination. [ABSTRACT FROM PUBLISHER]

The Internet of Things (IoT) is large scale by nature, which is manifested by the massive number of connected devices as well as their vast spatial existence. Cellular networks, which provide ubiquitous, reliable, and efficient wireless access, will play fundamental rule in delivering the first-mile access for the data tsunami to be generated by the IoT. However, cellular networks may have scalability problems to provide uplink connectivity to massive numbers of connected things. To characterize the scalability of cellular uplink in the context of IoT networks, this paper develops a traffic-aware spatiotemporal mathematical model for IoT devices supported by cellular uplink connectivity. The developed model is based on stochastic geometry and queueing theory to account for the traffic requirement per IoT device, the different transmission strategies, and the mutual interference between the IoT devices. To this end, the developed model is utilized to characterize the extent to which cellular networks can accommodate IoT traffic as well as to assess and compare three different transmission strategies that incorporate a combination of transmission persistency, backoff, and power-ramping. The analysis and the results clearly illustrate the scalability problem imposed by IoT on cellular network and offer insights into effective scenarios for each transmission strategy. [ABSTRACT FROM PUBLISHER]

The outage probability (OP) of the signal-to-interference-plus-noise ratio (SINR) is an important metric that is used to evaluate the performance of wireless systems. One difficulty toward assessing the OP is that, in realistic scenarios, closed-form expressions cannot be derived. This is, for instance, the case of the Log-normal environment, in which evaluating the OP of the SINR amounts to computing the probability that a sum of correlated Log-normal variates exceeds a given threshold. Since such a probability does not admit a closed-form expression, it has thus far been evaluated by several approximation techniques, the accuracies of which are not guaranteed in the region of small OPs. For these regions, simulation techniques based on variance reduction algorithms are a good alternative, being quick and highly accurate for estimating rare event probabilities. This constitutes the major motivation behind this paper. More specifically, we propose a generalized hybrid importance sampling scheme, based on a combination of a mean shifting and a covariance matrix scaling, to evaluate the OP of the SINR in a Log-normal environment. We further our analysis by providing a detailed study of two particular cases. Finally, the performance of these techniques is performed both theoretically and through various simulation results. [ABSTRACT FROM PUBLISHER]

The unrelenting increase in the population of mobile users and their traffic demands drive cellular network operators to densify their network infrastructure. Network densification shrinks the footprint of base stations (BSs) and reduces the number of users associated with each BS, leading to an improved spatial frequency reuse and spectral efficiency, and thus, higher network capacity. However, the densification gain comes at the expense of higher handover rates and network control overhead. Hence, user’s mobility can diminish or even nullifies the foreseen densification gain. In this context, splitting the control plane ( $C$ -plane) and user plane ( $U$ -plane) is proposed as a potential solution to harvest densification gain with reduced cost in terms of handover rate and network control overhead. In this paper, we use stochastic geometry to develop a tractable mobility-aware model for a two-tier downlink cellular network with ultra-dense small cells and $C$ -plane/ $U$ -plane split architecture. The developed model is then used to quantify the effect of mobility on the foreseen densification gain with and without $C$ -plane/ $U$ -plane split. To this end, we shed light on the handover problem in dense cellular environments, show scenarios where the network fails to support certain mobility profiles, and obtain network design insights. [ABSTRACT FROM PUBLISHER]

In this paper, we study a multiple-antenna two-way relaying (TWR) cognitive radio (CR) system. A space alignment (SA) technique is adopted by the secondary users (SUs) to avoid interference with the primary users (PUs). We derive the optimal power allocation that maximizes the TWR achievable SU sum-rate while respecting the total power budget and the relay power constraints. We also analyze the case in which the relay is able to optimize its gain matrix structure to enhance the SU sum-rate. In the numerical results, we quantify the sum-rate gain of using the SA in the TWR CR and we show that the SU sum-rate is very limited when the relay power is low or the PU power and its resulting interference are high. In addition, we optimize the relay gain using an iterative algorithm and compare between different relay matrix structures. [ABSTRACT FROM PUBLISHER]

Full-duplex (FD) communication is optimistically promoted to double the spectral efficiency if sufficient self-interference cancellation (SIC) is achieved. However, this is not true when deploying FD-communication in a large-scale setup due to the induced mutual interference. Therefore, a large-scale study is necessary to draw legitimate conclusions about gains associated with FD-communication. This paper studies the FD operation for underlay device-to-device (D2D) communication sharing the uplink resources in cellular networks. We propose a disjoint fine-tuned selection criterion for the D2D and FD modes of operation. Then, we develop a tractable analytical paradigm, based on stochastic geometry, to calculate the outage probability and rate for cellular and D2D users. The results reveal that even in the case of perfect SIC, due to the increased interference injected to the network by FD-D2D communication, having all proximity UEs transmit in FD-D2D is not beneficial for the network. However, if the system parameters are carefully tuned, non-trivial network spectral-efficiency gains (64% shown) can be harvested. We also investigate the effects of imperfect SIC and D2D-link distance distribution on the harvested FD gains. [ABSTRACT FROM PUBLISHER]

Backward compatibility is an essential ingredient for the success of new technologies. In the context of in-band full-duplex (FD) communication, FD base stations (BSs) should support half-duplex (HD) users’ equipment (UEs) without sacrificing the foreseen FD gains. This paper presents flexible and tractable modeling framework for multi-tier cellular networks with FD BSs and FD/HD UEs. The presented model is based on stochastic geometry and accounts for the intrinsic vulnerability of uplink transmissions. The results show that FD UEs are not necessarily required to harvest rate gains from FD BSs. In particular, the results show that adding FD UEs to FD BSs offers a maximum of 5% rate gain over FD BSs and HD UEs case if multi-user diversity is exploited, which is a marginal gain compared with the burden required to implement FD transceivers at the UEs’ side. To this end, we shed light on practical scenarios where HD UEs operation with FD BSs outperforms the operation when both the BSs and UEs are FD and we find a closed-form expression for the critical value of the self-interference attenuation power required for the FD UEs to outperform HD UEs. [ABSTRACT FROM AUTHOR]

Device-to-device (D2D) communication enables the user equipments (UEs) located in close proximity to bypass the cellular base stations (BSs) and directly connect to each other, and thereby, offload traffic from the cellular infrastructure. D2D communication can improve spatial frequency reuse and energy efficiency in cellular networks. This paper presents a comprehensive and tractable analytical framework for D2D-enabled uplink cellular networks with a flexible mode selection scheme along with truncated channel inversion power control. The developed framework is used to analyze and understand how the underlaying D2D communication affects the cellular network performance. Through comprehensive numerical analysis, we investigate the expected performance gains and provide guidelines for selecting the network parameters. [ABSTRACT FROM PUBLISHER]