Search

This paper studies an unmanned aerial vehicle (UAV)-assisted wireless powered IoT network, where a rotary-wing UAV adopts fly-hover-communicate protocol to successively visit IoT devices in demand. During the hovering periods, the UAV works on full-duplex mode to simultaneously collect data from the target device and charge other devices within its coverage. Practical propulsion power consumption model and non-linear energy harvesting model are taken into account. We formulate a multi-objective optimization problem to jointly optimize three objectives: maximization of sum data rate, maximization of total harvested energy and minimization of UAV’s energy consumption over a particular mission period. These three objectives are in conflict with each other partly and weight parameters are given to describe associated importance. Since IoT devices keep gathering information from the physical surrounding environment and their requirements to upload data change dynamically, online path planning of the UAV is required. In this paper, we apply deep reinforcement learning algorithm to achieve online decision. An extended deep deterministic policy gradient (DDPG) algorithm is proposed to learn control policies of UAV over multiple objectives. While training, the agent learns to produce optimal policies under given weights conditions on the basis of achieving timely data collection according to the requirement priority and avoiding devices’ data overflow. The verification results show that the proposed MODDPG (multi-objective DDPG) algorithm achieves joint optimization of three objectives and optimal policies can be adjusted according to weight parameters among optimization objectives. [ABSTRACT FROM AUTHOR]

In this paper, we present a low-complexity recursive approach for massive and scalable code-domain nonorthogonal multiple access (NOMA) with applications to emerging low-capacity scenarios. The problem definition in this paper is inspired by three major requirements of the next generations of wireless networks. Firstly, the proposed scheme is particularly beneficial in low-capacity regimes which is important in practical scenarios of utmost interest such as the Internet-of-Things (IoT) and massive machine-type communication (mMTC). Secondly, we employ code-domain NOMA to efficiently share the scarce common resources among the users. Finally, the proposed recursive approach enables code-domain NOMA with low-complexity detection algorithms that are scalable with the number of users to satisfy the requirements of massive connectivity. To this end, we propose a novel encoding and decoding scheme for code-domain NOMA based on factorizing the pattern matrix, for assigning the available resource elements to the users, as the Kronecker product of several smaller factor matrices. As a result, both the pattern matrix design at the transmitter side and the mixed symbols’ detection at the receiver side can be performed over matrices with dimensions that are much smaller than the overall pattern matrix. Consequently, this leads to significant reduction in both the complexity and the latency of the detection. We present the detection algorithm for the general case of factor matrices. The proposed algorithm involves several recursions each involving certain sets of equations corresponding to a certain factor matrix. We then characterize the system performance in terms of average sum rate, latency, and detection complexity. Our latency and complexity analysis confirm the superiority of our proposed scheme in enabling large pattern matrices. Moreover, our numerical results for the average sum rate show that the proposed scheme provides better performance compared to straightforward code-domain NOMA with comparable complexity, especially at low-capacity regimes. [ABSTRACT FROM AUTHOR]

In this paper, we leverage reinforcement learning (RL) and cross-layer network coding (CLNC) for efficiently pre-fetching requested contents to the local caches and delivering these contents to requesting users in a downlink fog-radio access network (F-RAN) with device-to-device (D2D) communications. In the considered system, fog access points (F-APs) and cache-enabled D2D (CE-D2D) users are equipped with local caches that alleviate traffic burden at the fronthaul and facilitate rapid delivery of the users’ contents. To this end, the CLNC scheme optimizes the coding decisions, transmission rates, and power levels of both F-APs and CE-D2D users, and RL scheme optimizes caching strategy. A joint content placement and delivery problem is formulated as an optimization problem with a goal to maximize system sum-rate. The problem is an NP-hard problem. To efficiently solve it, we first develop an innovative decentralized CLNC coalition formation (CLNC-CF) switch algorithm to obtain a stable solution for the content delivery problem, where F-APs and CE-D2D users utilize CLNC resource allocation. By considering statistics of channel and users’ content request into account, we then develop a multi-agent RL algorithm for optimizing the content placement at both F-APs and CE-D2D users. Simulation results show that the proposed joint CLNC-CF-RL framework can effectively improve the sum-rate by up to 30%, 60%, and 150%, respectively, compared to: 1) an optimal uncoded algorithm, 2) a standard rate-aware-NC algorithm, and 3) a benchmark classical NC with network-layer optimization. [ABSTRACT FROM AUTHOR]

Edge federated learning (FL) is an emerging paradigm that trains a global parametric model from distributed datasets based on wireless communications. This paper proposes a unit-modulus over-the-air computation (UMAirComp) framework to facilitate efficient edge federated learning, which simultaneously uploads local model parameters and updates global model parameters via analog beamforming. The proposed framework avoids sophisticated baseband signal processing, leading to low communication delays and implementation costs. Training loss bounds of UMAirComp FL systems are derived and two low-complexity large-scale optimization algorithms, termed penalty alternating minimization (PAM) and accelerated gradient projection (AGP), are proposed to minimize the nonconvex nonsmooth loss bound. Simulation results show that the proposed UMAirComp framework with PAM algorithm achieves a smaller mean square error of model parameters’ estimation, training loss, and test error compared with other benchmark schemes. Moreover, the proposed UMAirComp framework with AGP algorithm achieves satisfactory performance while reduces the computational complexity by orders of magnitude compared with existing optimization algorithms. Finally, we demonstrate the implementation of UMAirComp in a vehicle-to-everything autonomous driving simulation platform. It is found that autonomous driving tasks are more sensitive to model parameter errors than other tasks since the neural networks for autonomous driving contain sparser model parameters. [ABSTRACT FROM AUTHOR]

The interpolation based algebraic soft decoding yields a high decoding performance for Reed-Solomon (RS) codes with a polynomial-time complexity. Its computationally expensive interpolation can be facilitated using the module structure. The desired Gröbner basis can be achieved by reducing the basis of a module. This paper proposes the low-complexity Chase (LCC) decoding algorithm using this module basis reduction (BR) interpolation technique, namely the LCC-BR algorithm. By identifying $\eta $ unreliable symbols, $2^\eta $ decoding test-vectors will be formulated. The LCC-BR algorithm first constructs a common basis which will be shared by the decoding of all test-vectors. This eliminates the redundant computation in decoding each test-vector, resulting in a lower decoding complexity and latency. This paper further proposes the progressive LCC-BR algorithm that decodes the test-vectors sequentially and terminates once the maximum-likelihood decision decoding outcome is reached. Exploiting the difference between the adjacent test-vectors, this progressive decoding is realized without any additional memory cost. Complexity analysis shows that the LCC-BR algorithm yields a lower complexity and latency, especially for high rate codes, which will be validated by the numerical results. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the unmanned aerial vehicle (UAV)-aided simultaneous uplink and downlink transmission networks, where one UAV acting as a disseminator is connected to multiple access points (AP), and the other UAV acting as a base station (BS) collects data from numerous sensor nodes (SNs). The goal of this paper is to maximize the system throughput by jointly optimizing the 3D UAV trajectory, communication scheduling, and UAV-AP/SN transmit power. We first consider a special case where the UAV-BS and UAV-AP trajectories are pre-determined. Although the resulting problem is an integer and non-convex optimization problem, a globally optimal solution is obtained by applying the polyblock outer approximation (POA) method based on the problem’s hidden monotonic structure. Subsequently, for the general case considering the 3D UAV trajectory optimization, an efficient iterative algorithm is proposed to alternately optimize the divided sub-problems based on the successive convex approximation (SCA) technique. Numerical results demonstrate that the proposed design is able to achieve significant system throughput gain over the benchmarks. In addition, the SCA-based method can achieve nearly the same performance as the POA-based method with much lower computational complexity. [ABSTRACT FROM AUTHOR]

This paper derives the maximum achievable sum-rate and presents the optimal encoding/decoding framework for rate-diverse wireless network coding (RD-WNC) over broadband channels consisting of multiple parallel subchannels. RD-WNC applies to a communication scenario in which a base station wants to deliver two different messages with different rates to two users. The base station combines the two separate messages into one network-coded message and broadcasts the network-coded message to both users. Each user then extracts its desired message from the network-coded message by subtracting from it the other message, which we assume to be side information available to the user. Deriving the maximum achievable sum-rate for RD-WNC is challenging when the channel consists of multiple parallel subchannels with different channel coefficients (e.g., the subcarrier channels of OFDM systems), since apart from the rate allocation between the two users, optimal power allocation among multiple subchannels needs to be identified. The first contribution of this paper is a new “mountain-leveling” power allocation algorithm to achieve the maximum sum-rate. With the resulting power allocation, we can then achieve the corresponding optimal sum-rate by having a separate encoding/decoding mechanism for each subchannels, but doing so is cumbersome and complex when the number of subchannels is large. The second contribution of this paper is a practical encoding/decoding framework using only one encoder-decoder mechanism for all subchannels without sacrificing sum-rate optimality. We provide numerical results to corroborate our theoretical findings and to demonstrate the benefits of our encoding/decoding framework. [ABSTRACT FROM AUTHOR]

This paper focuses on improving indoor Wi-Fi localization by mitigating the effect of fluctuation of received signal strength indication (RSSI). The RSSI data collected at each reference point is first transformed through translation and scaling. The BP (Back Propagation) neural network is then used to construct the ranging model using the transformed RSSI to determine the distances between the target point and each reference point. A genetic algorithm (GA) is developed to optimize the initial values of weights and biases of the BP neural network. For convenience, our proposed ranging model is denoted as GTBPD. A new localization algorithm is then proposed, which uses the GTBPD model and the sequential quadratic programming (SQP, an iterative nonlinear optimization algorithm), and the algorithm is denoted as GTBPD-LSQP for simplicity. Experiments were conducted in three areas of two different teaching buildings with complex environments. The performance of the proposed GTBPD-LSQP algorithm is evaluated and compared with four existing algorithms. The experimental results show that our proposed GTBPD-LSQP algorithm achieves significantly higher location accuracy than the four existing algorithms. [ABSTRACT FROM AUTHOR]

This paper studies the joint estimation of channel fading and user activity for the uplink of a grant-free massive machine-type communication system. Comparing with previous studies, we consider more practical aspects of the system, including non-i.i.d. signature matrices, low-resolution quantization, and random users activated by an unknown sparse rate. A new estimation algorithm, termed hybrid decentralized generalized expectation consistent (HyDeGEC), is then derived based on a hybrid network that applies scalar message passing for the prior inference and vector message passing for the likelihood inference. This new algorithm outperforms many state-of-the-art techniques in terms of robustness (to non-i.i.d. signatures), complexity (in computation per iteration), and/or estimation accuracy (of the channel and the activity rate). The state evolution of the algorithm is also analyzed, which, as validated by simulations, can capture precisely the algorithm’s per-iteration behavior in MSE. Summing up, the algorithm we propose here is practically effective, computationally efficient, and theoretically analyzable. [ABSTRACT FROM AUTHOR]

Conventional networks are based on layered protocols with intensive cross-layer interactions and complex signal processing at every node, making it difficult to meet the ultra-low latency requirement of mission critical applications in future communication systems. In this paper, we address this issue by proposing the concept of network template, which allows data to flow through it at the transmission symbol level, with minimal node processing. This is achieved by carefully calibrating the inter-connecting links among the nodes and pre-calculating the routing/network coding actions for each node, according to a set of preconfigured flows. In this paper, we focus on the minimum cost network template design to minimize the connections within the template, while ensuring that all the pre-defined configurations are feasible with the guaranteed throughput, latency and reliability. We show that the minimum cost network template design problem is difficult to solve optimally in general. We thus propose an efficient greedy algorithm to find a close-to-optimal solution. Simulation results show that the construction cost of the templates obtained by the proposed algorithm is very close to a lower bound. Furthermore, the construction cost increases only slightly with the number of pre-defined configurations, which confirms the flexibility of the network template design. [ABSTRACT FROM AUTHOR]

Future wireless networks need to support massive machine type communication (mMTC) where a massive number of devices accesses the network and massive MIMO is a promising enabling technology. Massive access schemes have been studied for co-located massive MIMO arrays. In this paper, we investigate the activity detection in grant-free random access for mMTC in cell-free massive MIMO networks using distributed arrays. Each active device transmits a non-orthogonal pilot sequence to the access points (APs) and the APs send the received signals to a central processing unit (CPU) for joint activity detection. The maximum likelihood device activity detection problem is formulated and algorithms for activity detection in cell-free massive MIMO are provided to solve it. The simulation results show that the macro diversity gain provided by the cell-free architecture improves the activity detection performance compared to co-located architecture when the coverage area is large. [ABSTRACT FROM AUTHOR]

A deep learning assisted sum-product detection algorithm (DL-SPDA) for faster-than-Nyquist (FTN) signaling is proposed in this paper. The proposed detection algorithm works on a modified factor graph which concatenates a neural network function node to the variable nodes of the conventional FTN factor graph to approach the maximum a posterior probabilities (MAP) error performance. In specific, the neural network performs as a function node in the modified factor graph to deal with the residual intersymbol interference (ISI) that is not considered by the conventional detector with a limited complexity. We modify the updating rule in the conventional sum-product algorithm so that the neural network assisted detector can be complemented to a turbo equalization receiver. Furthermore, we propose a compatible training technique to improve the detection performance of the proposed DL-SPDA with turbo equalization. In particular, the neural network is optimized in terms of the mutual information between the transmitted sequence and the extrinsic information. We also investigate the maximum-likelihood bit error rate (BER) performance of a finite length coded FTN system. Simulation results show that the error performance of the proposed algorithm approaches the MAP performance, which is consistent with the analytical BER. [ABSTRACT FROM AUTHOR]

In this paper, we investigate resource allocation for IRS-assisted green multiuser multiple-input single-output (MISO) systems. To minimize the total transmit power, both the beamforming vectors at the access point (AP) and the phase shifts at multiple IRSs are jointly optimized, while taking into account the minimum required quality-of-service (QoS) of multiple users. First, two novel algorithms, namely a penalty-based alternating minimization (AltMin) algorithm and an inner approximation (IA) algorithm, are developed to tackle the non-convexity of the formulated optimization problem when perfect channel state information (CSI) is available. Existing designs employ semidefinite relaxation in AltMin-based algorithms, which, however, cannot ensure convergence. In contrast, the proposed penalty-based AltMin and IA algorithms are guaranteed to converge to a stationary point and a Karush-Kuhn-Tucker (KKT) solution of the design problem, respectively. Second, the impact of imperfect knowledge of the CSI of the channels between the AP and the users is investigated. To this end, a non-convex robust optimization problem is formulated and the penalty-based AltMin algorithm is extended to obtain a stationary solution. Simulation results reveal a key trade-off between the speed of convergence and the achievable total transmit power for the two proposed algorithms. In addition, we show that the proposed algorithms can significantly reduce the total transmit power at the AP compared to various baseline schemes and that the optimal numbers of transmit antennas and IRS reflecting elements, which maximize the system energy efficiency of the considered system, are finite. [ABSTRACT FROM AUTHOR]

With growth in the number of smart devices and advancements in their hardware, in recent years, data-driven machine learning techniques have drawn significant attention. However, due to privacy and communication issues, it is not possible to collect this data at a centralized location. Federated learning is a machine learning setting where the centralized location trains a learning model over remote devices. Federated learning algorithms cannot be employed in the real world scenarios unless they consider unreliable and resource-constrained nature of the wireless medium. In this paper, we propose a federated learning algorithm that is suitable for cellular wireless networks. We prove its convergence, and provide a sub-optimal scheduling policy that improves the convergence rate. We also study the effect of local computation steps and communication steps on the convergence of the proposed algorithm. We prove, in practice, federated learning algorithms may solve a different problem than the one that they have been employed for if the unreliability of wireless channels is neglected. Finally, through numerous experiments on real and synthetic datasets, we demonstrate the convergence of our proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper investigates the energy efficiency (EE) optimization in downlink multi-cell massive multiple-input multiple-output (MIMO). In our research, the statistical channel state information (CSI) is exploited to reduce the signaling overhead. To maximize the minimum EE among the neighbouring cells, we design the transmit covariance matrices for each base station (BS). Specifically, optimization schemes for this max-min EE problem are developed, in the centralized and distributed ways, respectively. To obtain the transmit covariance matrices, we first find out the closed-form optimal transmit eigenmatrices for the BS in each cell, and convert the original transmit covariance matrices designing problem into a power allocation one. Then, to lower the computational complexity, we utilize an asymptotic approximation expression for the problem objective. Moreover, for the power allocation design, we adopt the minorization maximization method to address the non-convexity of the ergodic rate, and use Dinkelbach’s transform to convert the max-min fractional problem into a series of convex optimization subproblems. To tackle the transformed subproblems, we propose a centralized iterative water-filling scheme. For reducing the backhaul burden, we further develop a distributed algorithm for the power allocation problem, which requires limited inter-cell information sharing. Finally, the performance of the proposed algorithms are demonstrated by extensive numerical results. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new method to design low-density parity-check Hadamard (LDPC-Hadamard) codes — a type of ultimate-Shannon-limit approaching channel codes. The technique is based on applying Hadamard constraints to the check nodes in a generalized protograph-based LDPC code, followed by lifting the generalized protograph. We name the codes formed protograph-based LDPC Hadamard (PLDPC-Hadamard) codes. We also propose a modified Protograph Extrinsic Information Transfer (PEXIT) algorithm for analyzing and optimizing PLDPC-Hadamard code designs. The proposed algorithm further allows the analysis of PLDPC-Hadamard codes with degree- 1 and/or punctured nodes. We find codes with decoding thresholds ranging from −1.53 dB to −1.42 dB. At a BER of 10−5, the gaps of our codes to the ultimate-Shannon-limit range from 0.40 dB (for rate = 0.0494) to 0.16 dB (for rate = 0.003). Moreover, the error performance of our codes is comparable to that of the traditional LDPC-Hadamard codes. Finally, the BER performances of our codes after puncturing are simulated and compared. [ABSTRACT FROM AUTHOR]

This paper investigates the security problem of a multi-eavesdrop multiple-input-single-output (MISO) wiretap channel, where an N-antenna transmitter communicates with a single-antenna legitimate user in the presence of multiple single-antenna smart eavesdroppers. To overcome the security risk of the traditional secure constructive interference-based (CI-based) scheme when facing the smart eavesdroppers, we propose a novel deception scheme (DS) via a random transmission strategy, where the eavesdroppers are expected to decode the deception symbols correctly but unable to distinguish the authenticity of the decoded symbol. Then, an efficient algorithm is proposed for the deception signal-to interference-plus-noise (SINR)-balancing problem when perfect channel state information (CSI) is assumed. Furthermore, we consider a practical scenario where only imperfect CSI is available, and explore two different methods for the deception optimization problem, i.e., convexification relaxation approach (CRA) and Lagrangian relaxation approach (LRA), respectively. For both CSI cases, a closed-form solution to the considered CI-based deception scheme is obtained. Simulation results validate the superiority of the proposed approach over traditional secure precoding schemes, and also demonstrate the significant computation efficiency improvements for the proposed algorithms. [ABSTRACT FROM AUTHOR]

Hardware distortions (HWDs) render drastic effects on the performance of communication systems. They are recently proven to bear asymmetric signatures; and hence can be efficiently mitigated using improper Gaussian signaling (IGS), thanks to its additional design degrees of freedom. Discrete asymmetric signaling (AS) can practically realize the IGS by shaping the signals’ geometry or probability. In this paper, we adopt the probabilistic shaping (PS) instead of uniform symbols to mitigate the impact of HWDs and derive the optimal maximum a posterior detector. Then, we design the symbols’ probabilities to minimize the error rate performance while accommodating the improper nature of HWD. Although the design problem is a non-convex optimization problem, we simplified it using successive convex programming and propose an iterative algorithm. We further present a hybrid shaping (HS) design to gain the combined benefits of both PS and geometric shaping (GS). Finally, extensive numerical results and Monte Carlo (MC) simulations highlight the superiority of the proposed PS over conventional uniform constellation and GS. Both PS and HS achieve substantial improvements over the traditional uniform constellation and GS with up to one order magnitude in error probability and throughput. [ABSTRACT FROM AUTHOR]

This paper studies an intelligent reflecting surface (IRS) aided wireless powered sensor network (WPSN). Specifically, a power station (PS) provides wireless energy to multiple internet of thing (IoT) devices which supports them to deliver their own messages to an access point (AP). Moreover, we deploy an IRS to enhance the performance of the WPSN by intelligently adjusting the phase shift of each reflecting element. To evaluate the performance of the IRS assisted WPSN, we maximize its sum throughput to jointly optimize the phase shift matrices and the transmission time allocations. Due to the non-convexity of the formulated optimization problem, we first derive the optimal phase shifts of the wireless information transfer (WIT) in closed-form. Consequently, a semi-definite programming (SDP) relaxed approach is considered to jointly design the phase shift matrix of the wireless energy transfer (WET) and the transmission time allocations. In addition, we propose a low complexity scheme to gain insights and reduce the computational complexity incurred by the SDP relaxed scheme. Specifically, the optimal solutions of the phase shifts and the transmission time allocation are derived in closed-form by the Majorization-Minimization (MM) algorithm, the Lagrange dual method and the Karush-Kuhn-Tucker (KKT) conditions. Finally, numerical results are presented to validate the proposed schemes and confirm the beneficial role of the IRS in comparison to the benchmark schemes, where the proposed IRS assisted scheme achieves almost 100% higher sum throughput, in comparison to the counterpart without IRS. [ABSTRACT FROM AUTHOR]

A decoding algorithm for polar (sub)codes with binary 2t × 2t polarization kernels is presented. It is based on the window processing (WP) method, which exploits the linear relationship of the polarization kernels and the Arikan matrix. This relationship enables one to compute the kernel input symbols probabilities by computing the probabilities of several paths in Arikan successive cancellation (SC) decoder. In this paper we propose an improved version of WP, which has significantly lower arithmetic complexity and operates in log-likelihood ratios (LLRs) domain. The algorithm identifies and reuses common subexpressions arising in computation of Arikan SC path scores. The proposed algorithm is applied to kernels of size 16 and 32 with improved polarization properties. It enables polar (sub)codes with the considered kernels to simultaneously provide better performance and lower decoding complexity compared with polar (sub)codes with Arikan kernel. [ABSTRACT FROM AUTHOR]

In this paper, an intelligent reflecting surface (IRS) assisted spectrum sharing underlay cognitive radio (CR) wiretap channel (WTC) is studied, and we aim at enhancing the secrecy rate of secondary user in this channel subject to total power constraint at secondary transmitter (ST), interference power constraint (IPC) at primary receiver (PR) as well as unit modulus constraint at IRS. Due to extra IPC and eavesdropper (Eve) are considered, all the existing solutions for enhancing secrecy rate of IRS-assisted non-CR WTC as well as enhancing transmission rate in IRS-assisted CR channel without eavesdropper fail in this work. Therefore, we propose new numerical solutions to optimize the secrecy rate of this channel under full primary, secondary users’ channel state information (CSI) and three different cases of Eve’s CSI: full CSI, imperfect CSI with bounded estimation error, and no CSI. To solve the difficult non-convex optimization problem, an efficient alternating optimization (AO) algorithm is proposed to jointly optimize the beamformer at ST and phase shift coefficients at IRS. In particular, when optimizing the phase shift coefficients during each iteration of AO, a Dinkelbach based solution in combination with successive approximation and penalty based solution is proposed under full CSI and a penalty convex-concave procedure solution is proposed under imperfect Eve’s CSI. For no Eve’s CSI case, artificial noise (AN) aided approach is adopted to help enhancing the secrecy rate. Simulation results show that our proposed solutions for the IRS-assisted design greatly enhance the secrecy performance compared with the existing numerical solutions with and without IRS under full and imperfect Eve’s CSI. And positive secrecy rate can be achieved by our proposed AN aided approach given most channel realizations under no Eve’s CSI case so that secure communication also can be guaranteed. All of the proposed AO algorithms are guaranteed to monotonic convergence. [ABSTRACT FROM AUTHOR]

In this paper, a novel reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) symbiotic radio (SR) system is proposed, in which an RIS, operating as a secondary transmitter (STx), sends messages to a multi-antenna secondary receiver (SRx) by using cognitive backscattering communication, and simultaneously, it enhances the primary transmission from a multi-antenna primary transmitter (PTx) to a multi-antenna primary receiver (PRx) by intelligently reconfiguring the wireless environment. We are interested in the joint design of active transmit beamformer at the PTx and passive reflecting beamformer at the STx to minimize the total transmit power at the PTx, subject to the signal-to-noise-ratio (SNR) constraint for the secondary transmission and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, we decouple the original problem into a series of subproblems using the alternating optimization method and then iteratively solve them. The convergence performance and computational complexity of the proposed algorithm are analyzed. Furthermore, we develop a low-complexity algorithm to design the reflecting beamformer by solving a backscatter link enhancement problem through the semi-definite relaxation (SDR) technique. Then, theoretical analysis is performed to reveal the insights of the proposed system. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system. [ABSTRACT FROM AUTHOR]

To enhance spectrum efficiency for the future Internet-of-Things, in this paper, we investigate the joint subcarrier and power allocation problem for a full-duplex network with machine-to-machine nodes and cellular nodes. We aim to maximize the network spectral efficiency while achieving individual quality-of-service (QoS) requirements, considering imperfect and partial channel state information. The spectral efficiency maximization problem is formulated as a mixed-integer nonlinear programming problem and proved to be NP-hard. To make it more tractable, we first solve the coupling between subcarrier assignment and power allocation variables by replacing the product of two variables with one auxiliary variable. We then relax the binary subcarrier assignment variables to integer variables and introduce penalty terms to penalize the objective function. Majorization minimization method is adopted to further handle the coupling between uplink and downlink due to full-duplex transmission. We prove that the proposed joint resource allocation scheme converges to local optimal solution. Simulation results demonstrate the impact of channel estimation error on spectral efficiency and the superiority of the proposed algorithm. [ABSTRACT FROM AUTHOR]

In recent years, unmanned aerial vehicles (UAVs) have unlocked numerous sensing applications, which are expected to add billions of dollars to the world economy in the next decade. To further improve the Quality-of-Service in these applications, the 3rd Generation Partnership Project has considered the use of terrestrial cellular networks to support UAV sensing services, also known as the cellular Internet of UAVs. In this paper, we consider a cellular Internet of UAVs, where the sensory data can be transmitted either to the base station via cellular links, or to the mobile devices by underlay UAV-to-Device (U2D) communications. To evaluate the freshness of the sensory data, the concept of age of information (AoI) is adopted, in which a lower AoI implies fresher data. Since UAVs’ AoIs are determined by their trajectories during sensing and transmission, we investigate the AoI minimization problem for UAVs by designing their trajectories. This problem is a Markov decision problem with an infinite state-action space, and thus we utilize multi-agent deep reinforcement learning to approximate the state-action space. Then, we propose a multi-UAV trajectory design algorithm to solve this problem. Simulation results show that our proposed algorithm can achieve a lower AoI than a greedy algorithm, policy gradient algorithm, and overlay U2D scheme. [ABSTRACT FROM AUTHOR]

We propose a holographic version of a reconfigurable intelligent surface (RIS) and investigate its application to terahertz (THz) massive multiple-input multiple-output systems. Capitalizing on the miniaturization of THz electronic components, RISs can be implemented by densely packing sub-wavelength unit cells, so as to realize continuous or quasi-continuous apertures and to enable holographic communications. In this paper, in particular, we derive the beam pattern of a holographic RIS. Our analysis reveals that the beam pattern of an ideal holographic RIS can be well approximated by that of an ultra-dense RIS, which has a more practical hardware architecture. In addition, we propose a closed-loop channel estimation (CE) scheme to effectively estimate the broadband channels that characterize THz massive MIMO systems aided by holographic RISs. The proposed CE scheme includes a downlink coarse CE stage and an uplink finer-grained CE stage. The uplink pilot signals are judiciously designed for obtaining good CE performance. Moreover, to reduce the pilot overhead, we introduce a compressive sensing-based CE algorithm, which exploits the dual sparsity of THz MIMO channels in both the angular domain and delay domain. Simulation results demonstrate the superiority of holographic RISs over the non-holographic ones, and the effectiveness of the proposed CE scheme. [ABSTRACT FROM AUTHOR]

In this paper, we explore optimization-based and data-driven solutions in a reconfigurable intelligent surface (RIS)-aided multi-user mobile edge computing (MEC) system, where the user equipment (UEs) can partially offload their computation tasks to the access point (AP). We aim at maximizing the total completed task-input bits (TCTB) of all UEs with limited energy budgets during a given time slot, through jointly optimizing the RIS reflecting coefficients, the AP’s receive beamforming vectors, and the UEs’ energy partition strategies for local computing and offloading. A three-step block coordinate descending (BCD) algorithm is first proposed to effectively solve the non-convex TCTB maximization problem with guaranteed convergence. In order to reduce the computational complexity and facilitate lightweight online implementation of the optimization algorithm, we further construct two deep learning architectures. The first one takes channel state information (CSI) as input, while the second one exploits the UEs’ locations only for online inference. The two data-driven approaches are trained using data samples generated by the BCD algorithm via supervised learning. Our simulation results reveal a close match between the performance of the optimization-based BCD algorithm and the low-complexity learning-based architectures, all with superior performance to existing schemes in both cases with perfect and imperfect input features. Importantly, the location-only deep learning method is shown to offer a particularly practical and robust solution alleviating the need for CSI estimation and feedback when line-of-sight (LoS) direct links exist between UEs and the AP. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) is a promising new paradigm to achieve high spectral and energy efficiency for future wireless networks by reconfiguring the wireless signal propagation via passive reflection. To reap the promising gains of IRS, channel state information (CSI) is essential, whereas channel estimation errors are inevitable in practice due to limited channel training resources. In this paper, in order to optimize the performance of IRS-aided multiuser communications with imperfect CSI, we propose to jointly design the active transmit precoding at the access point (AP) and passive reflection coefficients of the IRS, each consisting of not only the conventional phase shift and also the newly exploited amplitude variation. First, the achievable rate of each user is derived assuming a practical IRS channel estimation method, which shows that the interference due to CSI errors is intricately related to the AP transmit precoders, the channel training power and the IRS reflection coefficients during both channel training and data transmission. Next, for the single-user case, by combining the benefits of the penalty method, Dinkelbach method and block successive upper-bound minimization (BSUM) method, a new penalized Dinkelbach-BSUM algorithm is proposed to optimize the IRS reflection coefficients for maximizing the achievable data transmission rate subjected to CSI errors; while for the multiuser case, a new penalty dual decomposition (PDD)-based algorithm is proposed to maximize the users’ weighted sum-rate. Finally, simulation results are presented to validate the effectiveness of our proposed algorithms as compared to benchmark schemes. In particular, useful insights are drawn to characterize the effect of IRS reflection amplitude control (with/without the conventional phase-shift control) on the system performance under imperfect CSI. [ABSTRACT FROM AUTHOR]

Alternating direction method of multipliers (ADMM) is an efficient implementation of linear programming (LP) decoding for low-density parity-check (LDPC) codes. By adding penalty terms to the objective function of the LP decoding model, ADMM variable node (VN) penalized decoding can suppress the non-integral solutions and improve the frame error rate (FER) performance in the low signal-to-noise ratio (SNR) region. In this paper, we propose a novel ADMM check node (CN) penalized decoding algorithm. Codeword solutions which satisfy all parity-check equations will have smaller penalty values than non-codeword solutions, including the non-integral solutions. We discuss the required properties of CN-penalty functions, propose a few functions that satisfy those properties, and study their performance/complexity trade-offs. We also investigate the convergence properties of the proposed algorithm and prove that its performance is independent of the transmitted codeword. Using Monte Carlo simulations and instanton analysis, we then demonstrate that the proposed CN-penalized decoder outperforms ADMM VN penalized decoders in both waterfall and error floor regions. This comes at the expense of some increase in the decoding complexity. [ABSTRACT FROM AUTHOR]

In Vehicle-to-Everything (V2X) networks, where all vehicles and infrastructures are interconnected for information sharing, data dissemination is increasingly playing a significant role in superior and pluralistic communication services. To empower the efficiency of data dissemination, in this paper, we propose a novel unmanned aerial vehicle (UAV)-enabled scheduling protocol consisting of a proactive caching policy and a file sharing strategy in V2X networks. In the proactive caching process, we deploy UAVs as flying base stations (BSs) with caching capability, where we propose a UAV dynamic trajectory scheduling (DTS) algorithm to optimize the caching duration. Whereas in the file sharing strategy, based on the previous vehicular caching status, we provide a framework of file sharing cycle for data dissemination scheduling and employ a channel prediction algorithm to alleviate communication overhead. Moreover, we propose a relay ordering algorithm to effectively improve the file sharing process. Simulation results demonstrate that, our proposed scheduling protocol can enhance the efficiency of data dissemination and achieve an improved network performance in terms of caching process, system throughput, and file sharing latency in V2X networks. [ABSTRACT FROM AUTHOR]

Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communication systems and propose a channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model. We present two iterative estimation algorithms for the channels between the base station and RIS, as well as the channels between RIS and users. One is based on alternating least squares (ALS), while the other uses vector approximate message passing to iteratively reconstruct two unknown channels from the estimated vectors. To theoretically assess the performance of the ALS-based algorithm, we derived its estimation Cramér-Rao Bound (CRB). We also discuss the downlink achievable sum rate computation with estimated channels and different precoding schemes for the base station. Our extensive simulation results show that our algorithms outperform benchmark schemes and that the ALS technique achieves the CRB. It is also demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms. [ABSTRACT FROM AUTHOR]

Underwater environments create a challenging channel for communications. In this paper, we design a novel receiver system by exploring the machine learning technique–Deep Belief Network (DBN) – to combat the signal distortion caused by the Doppler effect and multi-path propagation. We evaluate the performance of the proposed receiver system in both simulation experiments and sea trials. Our proposed receiver system comprises of DBN based de-noising and classification of the received signal. First, the received signal is segmented into frames before the each of these frames is individually pre-processed using a novel pixelization algorithm. Then, using the DBN based de-noising algorithm, features are extracted from these frames and used to reconstruct the received signal. Finally, DBN based classification of the reconstructed signal occurs. Our proposed DBN based receiver system does show better performance in channels influenced by the Doppler effect and multi-path propagation with a performance improvement of 13.2dB at 10−3 Bit Error Rate (BER). [ABSTRACT FROM AUTHOR]

This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square M-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols are independent of each other; a pair of delay schemes with delayed coded bits having identical bit-channel capacity lead to equivalent DBICM capacity. Using these two properties, we efficiently optimize the delay scheme for any uniform Gray-QAM systems. Furthermore, these two properties enable efficient LDPC code designs regarding unequal error protection via bit-channel type classifications. Moreover, we use protograph-based extrinsic information transfer charts to jointly optimize degree distributions and channel assignments of LDPC codes and propose a constrained progressive edge growth like algorithm to jointly construct LDPC codes and bit-interleavers for DBICM, taking distinctive bit-channel’s capacity into account. Simulation results demonstrate that the designed LDPC coded DBICM systems significantly outperform LDPC coded BICM systems. [ABSTRACT FROM AUTHOR]

Grant-access based legacy networks are unable to deliver Uplink (UL) dominated sporadic transmission of short packets with low signalling overhead, which are the requirements of Massive Machine Type Communication (mMTC). Hence, grant-free Non-Orthogonal Multiple Access (NOMA) techniques are more suited for mMTC. Due to the inherent sparsity in the user activity pattern in an mMTC system, the existing literature revolves around Compressive Sensing based Multi User Detection (CS-MUD) algorithms, which employ random or Zadoff-Chu spreading sequences for NOMA. In this paper we explore the utility of sinusoidal spreading sequences, which allow some non-iterative algorithms to be employed in the context of active user detection, channel estimation and data detection in a UL grant-free mMTC system. These algorithms do not need prior knowledge about the user behaviour statistics, noise statistics, and the level of sparsity in the user activity, which might be difficult to obtain at the Base Station (BS). We present a comprehensive performance and complexity analysis to assess the feasibility of our proposal. Extensive numerical trials demonstrate the utility of sinusoidal codes for mMTC. [ABSTRACT FROM AUTHOR]

Cache optimization, i.e., determining the optimal content placement and routing paths, is essential for obtaining high performance of cache-enabled networks. This paper studies the problem of optimizing system throughput and content delivery cost over cache networks with lossy links (i.e., ICN-based wireless IoT systems), where content is divided into packet-level chunks, and packets may be lost in transmission. We first propose a new performance metric – the expected overall content routing cost for satisfied requests (RCS), for better characterizing content delivery cost under packet losses. RCS at the same time possesses the attractive mathematical property of super-modularity. We then formulate an optimization problem for the task through jointly optimizing content caching and request routing, and analyze it under fixed-routing scenario. The formulated problem is NP-hard and we prove it is reducible to the one of minimizing content routing cost without packet losses. We establish rules for the reduction, and leverage existing efficient algorithm to solve the problem. We also propose a potential-based online algorithm that is simple and adaptive to traffic changes and packet losses. The effectiveness of our mechanism is validated through extensive simulations over a wide array of network topologies. [ABSTRACT FROM AUTHOR]

MmWave cell-free systems where multiple base stations (BSs) cooperatively serve user using the mmWave band signal have gained much attention recently due to its capability to dramatically improve the system capacity. One potential drawback of mmWave cell-free systems is that an intensive deployment of BSs increases the energy consumption of network substantially. To improve the energy efficiency, acquisition of accurate downlink channel state information (CSI) at the BSs is essential. However, this task is not easy since the CSI feedback overhead scales linearly with the number of antennas as well as the number of BSs. In this paper, we propose an approach to maximize the energy efficiency of mmWave cell-free systems under the limited feedback. Key idea of the proposed energy-efficient dominating path selection (EE-DPS) algorithm is to choose a small number of paths in the angular domain channel and then exploit the channel information of chosen paths in the data precoding and power allocation. By choosing the dominating paths maximizing the energy efficiency and then feeding back the components of chosen paths, we achieve a considerable reduction in the feedback overhead. Numerical results demonstrate that EE-DPS achieves more than 80% energy efficiency improvement over the conventional CSI feedback-based schemes. [ABSTRACT FROM AUTHOR]

Fog radio access network (Fog-RAN), which pushes caching and computing capabilities to the network edge, is capable of efficiently delivering content to users by using carefully designed caching placement and content replacement algorithms. In this paper, the transmission scheme design and coding parameter optimization will be considered for coded caching in Fog-RAN, where the reliability of content delivery, i.e., content outage probability, is used as the performance metric. The problem will be formulated as a complicated multi-objective probabilistic combinatorial optimization. A novel maximum $b$ -matching approach will then be proposed to obtain the Pareto optimal solution with fairness constraint. Based on the fast message passing approach, a distributed algorithm with a low memory usage of $O(M+N)$ is also proposed, where $M$ is the number of users and $N$ is the number of fog access points (Fog-APs). Although it is usually very difficult to derive the closed-form formulas for the optimal solution, the approximation formulas of the content outage probability will also be obtained as a function of coding parameters. The asymptotic optimal coding parameters can then be obtained by defining and deriving the outage exponent region and diversity-multiplexing region. Simulation results will illustrate the accuracy of the theoretical derivations, and verify the outage performance of the proposed approach. Therefore, this paper not only proposes a practical distributed Fog-AP selection algorithm for coded caching but also provides a systematic way to evaluate and optimize the performance of Fog-RANs. [ABSTRACT FROM AUTHOR]

This paper investigates the dynamic access point (AP) clustering and precoding problem in the downlink of user-centric virtual cell networks. The goal is to maximize the weighted sum spectral efficiency (SE) while satisfying the power constraints and AP clustering constraints in adjacent time slots (TSs). By adopting the random walk mobility to model the mobile user equipments’ movement behaviors, we consider dynamic and time-varying channel conditions. Therefore, the weighted sum SE maximization programming takes the form of discrete-time sequence of mixed-integer non-convex optimization problems. In this paper, we propose to solve this sequential problem in two stages. In the first stage, a dynamic AP clustering approach based on discrete particle swarm optimization is developed. This approach takes the advantage of the channel correlation by exploiting the relationship between AP clustering solutions in adjacent TSs to improve the SE performance and reduce complexity. In the second stage, given the AP clustering solution obtained in the first stage, a distributed precoding algorithm is devised via applying the weighted minimum mean square error method. By combining these two stages, we propose a novel dynamic AP clustering and precoding algorithm (DAPC-Pre). The effectiveness of the proposed DAPC-Pre algorithm is verified by the simulation results. In particular, the proposed algorithm converges fast and significantly outperforms benchmark algorithms in terms of sum SE under different dynamic environments. [ABSTRACT FROM AUTHOR]

In one of the several manifestations, the future cellular networks are required to accommodate a massive number of devices, several orders of magnitude compared to today’s networks. At the same time, the future cellular networks will have to fulfill stringent latency constraints. To that end, one problem that is posed as a potential showstopper is extreme congestion for requesting uplink scheduling over the physical random access channel (PRACH). Indeed, such congestion drags along scheduling delay problems. In this paper, the use of self-organized device-to-device (D2D) clustering is advocated for mitigating PRACH congestion. To this end, this paper proposes two D2D clustering schemes, namely, random-based clustering and channel-gain-based clustering. Accordingly, this paper sheds light on random access within the proposed D2D clustering schemes and presents a case study based on a stochastic geometry framework. For the sake of objective evaluation, the D2D clustering is benchmarked by the conventional scheduling request procedure. Accordingly, this paper offers insights into useful scenarios that minimize the scheduling delay for each clustering scheme. Finally, this paper discusses the implementation algorithm and some potential implementation issues and remedies. [ABSTRACT FROM AUTHOR]

In this paper, the joint spectrum sensing and resource allocation problem is investigated in a multi-band-multi-user cognitive radio (CR) network. Assuming imperfect spectrum sensing information, our goal is to jointly optimize the sensing threshold and power allocation strategy such that the average total throughput of secondary users (SUs) is maximized. In Addition, the power of SUs is constrained to keep the interference introduced to primary users under certain limit, which gives rise to a nonconvex mixed integer non-linear programming (MINLP) optimization problem. Our contribution in this paper is threefold. First, it is illustrated that the dimension of the nonconvex MINLP problem can be significantly reduced, which helps to re-formulate the optimization problem without resorting to integer variables. Second, it is demonstrated that the simplified formulation admits the canonical form of a monotonic optimization, and an $\epsilon $ -optimal solution can be achieved using the polyblock outer approximation algorithm. Third, a practical low-complexity spectrum sensing and resource allocation algorithm is developed to reduce the computational cost. Finally, the effectiveness of proposed algorithms is verified by simulations. [ABSTRACT FROM AUTHOR]

Piggybacking is an efficient framework to reduce the repair bandwidth of distributed storage systems, especially, when the systems meet the settings–maximum distance separable (MDS), high code rate, and a small number of substripes. Through an analysis on the repair ratio of a piggybacking construction, this paper reveals that the proportion $p_{p}$ of piggybacking protected stripes is the key to significantly decrease the repair bandwidth. Based on this analysis, this paper proposes a repair efficient coding under piggybacking framework (REPB) by considering various piggybacking protected stripes and MDS only protected stripes. The repair ratio of REPB tends to 0 and is close to theoretical cut-set bound, as the proportion $p_{p}$ is no longer fixed at 1/2. Furthermore, the proposed REPB codes enjoy low computational complexity in repair operation. [ABSTRACT FROM AUTHOR]

It is of central interest in information theory to determine whether a given vector in the entropy space is an almost entropic vector. This problem can be answered if all the information inequalities are known, but this is an extremely challenging problem. On the other hand, we can establish that a given vector is an entropy vector if we can show the existence of distribution such that the corresponding entropy vector is the same as the given vector. However, there is no known algorithm to solve this problem. Only for the simplest case of binary entropy vectors, an algorithm is known to solve this problem. In this paper, we present a recursive algorithm to determine whether a given vector is a quasi-uniform entropy vector and, if it is, to return a consistent quasi-uniform distribution. We also present two applications of the recursive procedure: (i) to generate all quasi-uniform distributions motivated by the problem of finding the smallest quasi-uniform distribution such that its entropy vector violates the well known Ingleton inequality and (ii) to obtain an entropy vector (not necessarily quasi-uniform) near to a target vector in the entropy space for random variables with given alphabet size. [ABSTRACT FROM AUTHOR]

In this paper, we consider the downlink transmission of URLLC packets requiring very low latency and ultra-reliability. Because of the low latency constraint, the Base Station may not have enough time to acquire the instantaneous Channel State Information (CSI) of the corresponding device and has then to transmit urgent packets immediately in the absence of CSI. To enhance reliability, we explore frequency diversity where a packet can be simultaneously sent over multiple channels. Using a Markov Decision Process framework, we address the problem of dynamic channel allocation to the URLLC devices in absence of instantaneous CSI. More precisely, we define a multi-agent MDP wherein the state of each device is the packet loss rate experienced in the previous time slots and the decision variable is how to split the available orthogonal channels across the devices. We design a new low-complexity algorithm which avoids the exhaustive enumeration of all possible resource allocations and enables significant computational savings compared to the Value Iteration algorithm. We investigate the gap between our proposed low complexity algorithm and the Value Iteration policy. We provide numerical performance results and show that our algorithm can achieve more than 80% of the optimal reward with substantial computational complexity reduction. [ABSTRACT FROM AUTHOR]

Multi-user spatial modulation (SM) assisted by sparse code multiple access (SCMA) has been recently proposed to provide uplink high spectral efficiency transmission. The message passing algorithm (MPA) is employed to detect the transmitted signals, which suffers from high complexity. This paper proposes three low-complexity algorithms for the first time to the SM-SCMA. The first algorithm is referred to as successive user detection (SUD), while the second algorithm is the modified version of SUD, namely modified SUD (MSUD). Then, for the first time, the tree-search of the SM-SCMA is constructed. Based on that tree-search, another variant of the sphere decoder (SD) is proposed for the SM-SCMA, referred to as fixed-complexity SD (FCSD). SUD provides a benchmark for decoding complexity at the expense of bit-error-rate (BER) performance. Further, MSUD slightly increases the complexity of SUD with a significant improvement in BER performance. Finally, FCSD provides a near-optimum BER with a considerable reduction of the complexity compared to the MPA decoder and also supports parallel hardware implementation. The proposed algorithms provide flexible design choices for practical implementation based on system design demands. The complexity analysis and Monte-Carlo simulations of the BER are provided for the proposed algorithms. [ABSTRACT FROM AUTHOR]

Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable the multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in the literature. In this paper, we first establish a mathematical model for an F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, and so on), the analytical expressions for inter-symbol interference, inter-carrier interference, and adjacent-carrier interference are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of this paper is that we propose a multi-rate F-OFDM system to enable low-complexity low-cost communication scenarios, such as narrow-band Internet of Things, at the cost of generating inter-subband interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance loss. [ABSTRACT FROM PUBLISHER]

The distributed power control algorithms available in this paper assume perfect estimation of interference power at the receivers and often, the availability of perfect local channel state information (CSI). However, perfect estimation of interference power or acquisition of channel information is impractical. In this paper, we consider a generic class of distributed power control algorithms and analyze the resulting performance loss when faced with errors in CSI and/or interference level estimation. We approximate such power control algorithms with linearized state space dynamics wherein the errors in the estimation of received interference or the CSI, can be modeled as additive observation noise. Based on the proposed model, we derive lower bounds on the norm of the errors in the transmit power vector and receive signal-to-interference-plus-noise ratio (SINR) vector. Our analysis suggests that when the target SINR vector approaches the Pareto-optimal bound, the errors in the transmit vectors could grow without bound. As a consequence, to maintain a performance loss within an acceptable range, either much longer estimation times or lower target SINRs are required. Our numerical results confirm the validity of our analysis and the validity of the proposed bounds. [ABSTRACT FROM PUBLISHER]

This paper studies robust energy optimization for the cloud radio access network (C-RAN). The objective of this paper is to jointly minimize network power consumption through optimizing the base station (BS) mode, multi-user (MU)-BS association, and beamforming vectors given imperfect channel state information (CSI). To solve this non-trivial problem, we first transform the problem to a semi-definite programming (SDP) one using the S-lemma with the aid of the semi-definite relaxation technique, and then propose a SDP-based group sparse beamforming approach to solve it iteratively. Since the computational complexity of solving SDP problems is intractable, we propose to translate the uncertainty in the CSI to the uncertainty in its covariance matrix, and then recast the original problem as a mixed-integer second-order cone programming problem. We further propose a two-stage rank selection framework to determine the BS mode and MU-BS association separately and successively. Simulation results demonstrate the convergence of our proposed algorithms, and validate the effectiveness of the proposed algorithms in minimizing the network power consumption of the C-RAN. [ABSTRACT FROM PUBLISHER]

This paper presents a novel model-driven deep learning (DL) architecture, called TurboNet, for turbo decoding that integrates DL into the traditional max-log-maximum a posteriori (MAP) algorithm. The TurboNet inherits the superiority of the max-log-MAP algorithm and DL tools and thus presents excellent error-correction capability with low training cost. To design the TurboNet, the original iterative structure is unfolded as deep neural network (DNN) decoding units, where trainable weights are introduced to the max-log-MAP algorithm and optimized through supervised learning. To efficiently train the TurboNet, a loss function is carefully designed to prevent tricky gradient vanishing issue. To further reduce the computational complexity and training cost of the TurboNet, we can prune it into TurboNet+. Compared with the existing black-box DL approaches, the TurboNet+ has considerable advantage in computational complexity and is conducive to significantly reducing the decoding overhead. Furthermore, we also present a simple training strategy to address the overfitting issue, which enable efficient training of the proposed TurboNet+. Simulation results demonstrate TurboNet+’s superiority in error-correction ability, signal-to-noise ratio generalization, and computational overhead. In addition, an experimental system is established for an over-the-air (OTA) test with the help of a 5G rapid prototyping system and demonstrates TurboNet’s strong learning ability and great robustness to various scenarios. [ABSTRACT FROM AUTHOR]

In this paper, we propose an efficient beam training technique for millimeter-wave (mmWave) communications. Beam training should be performed frequently when some mobile users are under high mobility to ensure the accurate acquisition of the channel state information. To reduce the resource overhead caused by frequent beam training, we introduce a dedicated beam training strategy which sends the training beams separately to a specific high mobility user (called a target user) without changing the periodicity of the conventional beam training. The dedicated beam training requires a small amount of resources because the training beams can be optimized for the target user. To satisfy the performance requirement with a low training overhead, we propose the optimal training beam selection strategy which finds the best beamforming vectors yielding the lowest channel estimation error based on the target user’s probabilistic channel information. This dedicated beam training is combined with the greedy channel estimation algorithm that accounts for sparse characteristics and temporal dynamics of the target user’s channel. Our numerical evaluation demonstrates that the proposed scheme can maintain good channel estimation performance with significantly less training overhead compared to the conventional beam training protocols. [ABSTRACT FROM AUTHOR]

As a promising candidate for future Internet architecture, Named Data Networking (NDN) can achieve significant potential advantages over current TCP/IP based Internet in content distribution and mobility support, etc. However, the communication mode in NDN that one Interest packet for pulling one data packet is likely to incur Interest packets flooding and to cause extremely large-scale Pending Interest Table (PIT) of the NDN router, which may substantially degrade the performance of NDN. Moreover, the absence of predefined connections also induces another challenge for NDN to manage the successive and concurrent requests from consumers efficiently. In this paper, we propose flow-based NDN ($f$ -NDN) architecture capable of supporting flow transmission mode for addressing the aforementioned challenges. In the context of $f$ -NDN, a data flow is defined as an aggregate of data packets with the same name prefix, and a flow Interest packet is introduced to pull a data flow rather than a single data packet. The PIT, CS, and FIB are re-designed to enable $f$ -NDN to operate at the granularity of flows. Bitmap structure aided error handling mechanism is further presented for $f$ -NDN to deal with the flow transmission’s uncertain failures. The built-in flow support in $f$ -NDN allows us to conceive a flow-level multi-path transmission regime for balancing the traffic in NDN network and reducing the time consumed for pulling the entire content. Weight-based flow Interest splitting algorithm and optimal rate control algorithm are both proposed for optimizing multi-path transmission. We illustrate the capability of the proposed architecture in supporting flow transmission and multi-path by implementing it in both simulator and prototype systems. The evaluation results are also presented to show its achievable performance. [ABSTRACT FROM AUTHOR]

The technology of static user-centric virtual cell (VC) has been designed in the fifth-generation (5G) ultra-dense networks (UDNs) for alleviating both frequent handover and inter-cell interference. However, to provide the user-centric services, the fairness of resource management must be involved when the common vehicular-to-X (V2X) messages are multicast to the vehicle groups. In this paper, a dynamic user-centric virtual cell (DUVC) scheme is proposed for updating adaptively the VC through the mobile tracking of the vehicles. Furthermore, an approximation algorithm is proposed for solving the max-min-fair problem of resource management in V2X communication in order to better support V2X services throughout the service VC. Numerical results are provided for demonstrating that the proposed DUVC scheme is suitable for implementing in the V2X communication. Finally, the proposed algorithm is shown to outperform three other existing algorithms in terms of fairness of resource management. [ABSTRACT FROM AUTHOR]