Search

We consider performance enhancement of asymmetrically-clipped optical orthogonal frequency division multiplexing (ACO-OFDM) and related optical OFDM schemes, which are variations of OFDM in intensity-modulated optical wireless communications. Unlike most existing studies on specific designs of improved receivers, this paper investigates information theoretic limits of all possible receivers. For independent and identically distributed (IID) complex Gaussian inputs, we obtain an exact characterization of information rate of ACO-OFDM with improved receivers for all SNRs. It is proved that the high-SNR gain of improved receivers asymptotically achieve 1/4 bits per channel use, which is equivalent to 3 dB in electrical SNR or 1.5 dB in optical SNR; as the SNR decreases, the maximum achievable SNR gain of improved receivers decreases monotonically to a non-zero low-SNR limit, corresponding to an information rate gain of 36.3%. For practically used constellations, we derive an upper bound on the gain of improved receivers. Numerical results demonstrate that the upper bound can be approached to within 1 dB in optical SNR by combining existing improved receivers and coded modulation. We also show that our information theoretic analyses can be extended to Flip-OFDM and PAM-DMT. Our results imply that, for the considered schemes, improved receivers may reduce the gap to channel capacity significantly at low-to-moderate SNR. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the performance of an RIS-aided wireless communication system subject to outdated channel state information that may operate in both the near- and far-field regions. In particular, we take two RIS deployment strategies into consideration: (i) the centralized deployment, where all the reflecting elements are installed on a single RIS and (ii) the distributed deployment, where the same number of reflecting elements are placed on multiple RISs. For both deployment strategies, we derive accurate closed-form approximations for the ergodic capacity, and we introduce tight upper and lower bounds for the ergodic capacity to obtain useful design insights. From this analysis, we unveil that an increase of the transmit power, the Rician- $K$ factor, the accuracy of the channel state information and the number of reflecting elements help improve the system performance. Moreover, we prove that the centralized RIS-aided deployment may achieve a higher ergodic capacity as compared with the distributed RIS-aided deployment when the RIS is located near the base station or near the user. In different setups, on the other hand, we prove that the distributed deployment outperforms the centralized deployment. Finally, the analytical results are verified by using Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

Ultra-Reliable and Low-Latency Communications (URLLC) has attracted considerable attention because of its potential applications in factory automation, automated driving, and telesurgery anticipated for the era of the sixth-Generation (6G) networks. In URLLC with random channel gains and a hard delay constraint, the scheduling of backlogged queues and finite blocklength coding in the physical layer will make it very challenging to specify its performance limits. In this paper, we focus our attention on the asymptotic cross-layer analysis of URLLC when the Signal-to-Noise Ratio (SNR) is sufficiently high. More specifically, we find that a fundamental tradeoff exists among the service capability, latency, and error probability in the high SNR regime, which is characterized by a gain conservation equation. The main result of this work reveals that the sum of our defined service rate gain, real-time gain, and reliability gain is equal to one under the optimal policy. Numerical simulations are also exploited to validate that the derived gain conservation equation holds even with bounded random arrival. [ABSTRACT FROM AUTHOR]

Channel estimation is challenging for the reconfigurable intelligent surface (RIS)-aided wireless communications. Since the number of coefficients of the cascaded channel among the base station (BS), the RIS, and the user equipment (UE), is the product of the number of BS antennas, the number of RIS elements, and the number of UEs, the pilot overhead can be prohibitively high. In this paper, we propose a two-timescale channel estimation framework to exploit the property that the BS-RIS channel is high-dimensional but quasi-static, while the RIS-UE channel is mobile but low-dimensional. Specifically, to estimate the quasi-static BS-RIS channel, we propose a dual-link pilot transmission scheme, where the BS transmits downlink pilots and receives uplink pilots reflected by the RIS. Then, we propose a coordinate descent-based algorithm to recover the BS-RIS channel. Since the quasi-static BS-RIS channel is estimated less frequently than the mobile channel is, the average pilot overhead can be reduced from a long-term perspective. Although the mobile RIS-UE channel has to be frequently estimated in a small timescale, the associated pilot overhead is low thanks to its low dimension. Simulation results show that the proposed two-timescale channel estimation framework can achieve accurate channel estimation with low pilot overhead. [ABSTRACT FROM AUTHOR]

In order to satisfy the requirement of extremely high data rate in traffic hotspot regions, millimeter wave (mmWave) has attracted significant attention in wireless communication networks. While the coverage performance of mmWave networks based on the distribution of signal-to-interference-plus-noise ratio (SINR) has been widely studied, it provides only very limited information on the link reliability. In this paper, we provide a fine-grained performance analysis of the mmWave networks with hotspots. Specifically, we first establish a general and tractable framework to investigate the performance of mmWave networks using the Poisson cluster process integrated with several features of the mmWave band. Both open and closed association strategies are considered. To show what fraction of users in the networks achieves target reliability when the SINR is given, we derive the tier association probability and the moments of the conditional SINR distribution, based on which the exact meta distributions of SINR are given. Interestingly, in clustered mmWave networks, the widely used standard and generalized beta approximations do not work well when the blockage effect is severe. To resolve this issue, we provide a modified approximation by scaling the standard beta distribution, which is shown to be closer to the exact results. We conduct extensive simulations to study the impact of mmWave and deployment features on the performance of clustered mmWave networks. Numerical results reveal that the optimal scattering variance of mmWave base stations scales with the cluster size to maximize the number of concurrent reliable links, and increasing the antenna directivity results in more reliable communications than elevating the transmit power of mmWave base stations. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) is deemed as a promising solution to improve the spectral and energy efficiency of wireless communications cost-effectively. In this paper, we consider a wireless network where multiple base stations (BSs) serve their respective users with the aid of distributed IRSs in the downlink communication. Specifically, each IRS assists in the transmission from its associated BS to user via passive beamforming, while in the meantime, it also randomly scatters the signals from other co-channel BSs, thus resulting in additional signal as well as interference paths in the network. As such, a new IRS-user/BS association problem arises pertaining to optimally balance the passive beamforming gains from all IRSs among different BS-user communication links. To address this new problem, we first derive a tractable lower bound of the average signal-to-interference-plus-noise ratio (SINR) at the receiver of each user, termed average-signal-to-average-interference-plus-noise ratio (ASAINR), based on which two ASAINR balancing problems are formulated to maximize the minimum ASAINR among all users by optimizing the IRS-user associations without and with BS transmit power control, respectively. We also characterize the scaling behavior of user ASAINRs with the increasing number of IRS reflecting elements to investigate the different effects of IRS-reflected signal versus interference power. Moreover, to solve the two ASAINR balancing problems that are both non-convex optimization problems, we propose an optimal solution to the problem without BS power control and low-complexity suboptimal solutions to both problems by applying the branch-and-bound method and exploiting new properties of the IRS-user associations, respectively. Numerical results verify our performance analysis and also demonstrate significant performance gains of the proposed solutions over benchmark schemes. [ABSTRACT FROM AUTHOR]

We consider two users A and B wanting to exchange their messages MA and MB via a relay in a wireless communication network. To this aim, we have two methods: direct forward (DF) and computation and forward (CAF). In the first method, after an orthogonal multiple access (OMA) or non-orthogonal multiple access (NOMA) phase, the receiver decodes the two messages. In the second method, after a NOMA phase, the receiver decodes only the (modulo) sum. In the latter case the capacity region (computation region) is not known. This paper compares the two methods. To such aim, we propose a unified coding framework and identify a lower bound of achievable computation rates. We consider three constellations for the symmetric two-user Gaussian channel with Eisenstein constellation showing highest performance. We also show that a minimum signal-to-noise ratio is required for our CAF method to outperform DF, and we obtain the numerical values of such minimum ratios for the three constellations. Finally, we show achievability of our bounds, which is proved to require affine codes for computation, which has not been proved before. Overall, our results are useful for communication system designers towards practical implementation of multiple access methods in integrated wireless systems. [ABSTRACT FROM AUTHOR]