Search

As natural contamination of insulators may lead to flashover, its determining factors should be studied to prevent the occurrence of pollution flashover. In this paper, the fluid mechanics models of insulators with typical shed types were established to simulate their flow field distribution and particle collision coefficient (P). At the same time, a natural contamination test lasting for 8 months was carried out in order to contrast the experimental data and simulation results. The research results have shown that: wind velocity and shed type affect the flow field near the insulators; P is affected by particle diameter and wind velocity; under certain particle diameter and wind velocity, P reaches the maximum value; rainfall has different effects on contamination of insulators with different shed types; wind causes non-uniformly distribution of pollution on the surfaces; the simulation test and the experimental test are comparable. The research method and results can provide not only reference to establishing natural contaminating model but also significant meaning for the external insulation design and selection. [ABSTRACT FROM PUBLISHER]

Charge accumulation on a solid insulator surface is one of the critical factors for the development of dc gas-insulated equipment since it will lead to the overstress of polymeric insulation due to local field distortion and enhancement. Therefore, it is important to study the charge accumulation phenomenon on spacer surface under dc field. For decades, researchers have made tremendous progress on this subject by measurement and simulation. However, measurement results are quite different by different researchers due to various electrode configurations and experimental conditions. Further, most researchers use potential to represent charge density, which is not rigorous in that many charge density distribution details are hidden behind the potential. As for pure numerical simulation, reports are rather academic and sometimes cannot accord with the real fact. In this paper, attempts are made to characterize the charge accumulation patterns on spacer surface in HVDC gas-insulated system. Surface charge distributions on a model GIL spacer in 0.1 MPa air under DC voltage are obtained by an advanced measurement method, from which the dominant uniform charging pattern and random charge speckles are separated. Mechanism responsible for the dominant uniform charging pattern is discussed with the aid of a simulation model. Results indicate that, in a well-cleaned system, the electric current through the spacer bulk is the principal factor, but gas conduction is not negligible due to some inevitable ion sources. Highly localized pockets of charge are also observed, which are referred to as speckles. They may originate from micro discharges due to tiny metal particles on the spacer surface or microscopic protrusions on the electrodes. [ABSTRACT FROM PUBLISHER]