Search

Researchers and designers of insulation systems are facing new challenges due to the ubiquitous presence of power electronics devices in power conversion applications across various voltage levels. The stresses applied to insulation systems by power electronic devices require new approaches for evaluating the intensity and frequency content of working electric field strength and degradation processes. Typically these parameters are assessed through the analysis of partial discharges. Multilevel converters are increasingly being implemented in industrial applications due to the advantages they offer for example in efficiency, harmonic distortion and filtering strategies. This paper presents an analysis of partial discharges in a magnet twisted-pair wires subjected to high voltage pulse-width-modulated pulses obtained from a multilevel converter. A comparison between the number of levels and modulation frequencies on partial discharge inception and intensity are presented. As an assessment criterion, the voltage-time product above partial discharge inception level was compared. [ABSTRACT FROM AUTHOR]

This paper presents a capacitor charging power supply (CCPS) using high-voltage dc/dc converter for pulsed power applications. For the main converter, it used full-bridge phase-shifted (FBPS) pulse-width modulation (PWM) converter. The proposed CCPS has modularity concept, and the output voltage was boosted by a high-voltage high-frequency (HVHF) transformer included in FBPS PWM converter. The control method is used a phase-shifted PWM to reduce the losses caused by switching. To solve the voltage unbalancing problem of the output capacitors, synchronization algorithm is selected. Also Thermal characteristics are analyzed by theoretical calculation and simulation. Experimental results of the single module and CCPS are provided to validate the effectiveness of the proposed system and it was carried out the 20-kV 160-kW prototype. [ABSTRACT FROM PUBLISHER]

Capacitor charging power supply (CCPS) is a developed technology that utilizes resonant converters topology for high power applications. This paper proposes new a capacitor charging power supply using leg-rotation control method within a phase-shifted PWM full-bridge dc/dc converter. The capacitor charging power supply was connected in series to increase output voltage. Also, the proposed system is designed with soft switching techniques in order to achieve high efficiency, and a leg-rotation control method was used to reduce the heat generated from the IGBTs. The operation of the converter and design methodology will be described. A simplified model of a high-voltage high-frequency transformer is given and the structure is designed to decrease high-voltage stress. The validity of the proposed system is then verified by experimental results. The performance test of the capacitor charging power supply was carried out with a 2 μF capacitive load with a 20 kV output voltage. [ABSTRACT FROM AUTHOR]

This paper describes the design of a compact and highly repetitive pulsed power modulator based on semiconductor switches. Output specifications of the proposed modulator are as follows: variable output pulse voltage, 1-10 kV; width, 1-10 μs; pulse repetition rate (PRR), 1-50,000 pps; and average output power, 10 kW. The proposed solid-state pulsed power modulator has two main parts: an IGBT stack that hasa gate drive circuit for the pulse output with a variable pulse width and repetition rate, and a capacitor charger that has a controllable output voltage. To connect all the storage capacitors in a series for high voltage pulses, a simple and reliable IGBT stack structure was proposed based on the Marx generator. In addition, the gate driver circuit, which supplies power and signals to all the IGBTs simultaneously, was introduced. This providesa superior protection function against the arc and the short. To charge the storage capacitors, a novel 10 kW (10 kV, 1 A) high voltage capacitor charger with the combined advantageof a series-loaded resonant converter and a ZVS (zero-voltage-switching) full-bridge pulse width modulation (PWM) converter was proposed and designed especially for the solid-state pulsed power modulator. Theexperiment results verified that the proposed scheme and structure can be used effectively for a high voltage pulsed power modulator that requires variable voltage, repetition rate, and pulse width, depending on the process of the applications. [ABSTRACT FROM AUTHOR]