Search

Capacitor charging power supply (CCPS) is a developed technology that utilizes resonant converters topology for high power applications. This paper proposes new a capacitor charging power supply using leg-rotation control method within a phase-shifted PWM full-bridge dc/dc converter. The capacitor charging power supply was connected in series to increase output voltage. Also, the proposed system is designed with soft switching techniques in order to achieve high efficiency, and a leg-rotation control method was used to reduce the heat generated from the IGBTs. The operation of the converter and design methodology will be described. A simplified model of a high-voltage high-frequency transformer is given and the structure is designed to decrease high-voltage stress. The validity of the proposed system is then verified by experimental results. The performance test of the capacitor charging power supply was carried out with a 2 μF capacitive load with a 20 kV output voltage. [ABSTRACT FROM AUTHOR]

This paper presents a novel topology for the generation of high voltage pulses that uses both slow and fast solid-state power switches. This topology includes diode-capacitor units in parallel with commutation circuits connected to a positive buck-boost converter. This enables the generation of a range of high output voltages with a given number of capacitors. The advantages of this topology are the use of slow switches and a reduced number of diodes in comparison with conventional Marx generator. Simulations performed for single and repetitive pulse generation and experimental tests of a prototype hardware verify the proposed topology. [ABSTRACT FROM AUTHOR]

This paper presents operational data and parameters of the newest generation of polyphase resonant high voltage converter modulator (HVCM) as developed and delivered to the KAERI 100 MeV "PEFP" accelerator. The KAERI design realizes improvements from the SNS and SLAC designs. The present KAERI system operates two parallel THALES TH2089F 350 MHz klystrons with total power draw of 50 amperes at 105 kV. An additional 3 klystron system operating at 105 kV and 75 A is also being considered for the high energy sections of this accelerator. In these systems, to improve the IGBT switching performance, the HVCMs will be fitted with artificial zero-voltage-switching (ZVS) networks at turn-off. This new method of artificial ZVS should result in a 6 fold reduction of IGBT switching losses. This will improve the HCVM conversion efficiency to better than 95% at full average power, which is 500 kW for the 2 klystron system and 750 kW for the 3 klystron system. The artificial ZVS is accomplished by placing a soft switching capacitor network across the resonant boost transformer primary winding. This low loss snubber circuit reduces the dv/dt across the IGBTs at turn-off. As the transformer input busswork is extremely low inductance (<10 nH), the single network acts like it is across each IGBT collector-emitter terminal of the 4 transistor H-bridge switching network. We will review these topological improvements and the overall system as delivered to the KAERI accelerator with details of the installed operational results. [ABSTRACT FROM AUTHOR]