Search

In this paper, we propose and design a novel generator for the high voltage square pulses with the changeable polarities in order to reach the requirements and the needs for the intended experiments on sterilization of microorganism. The major component of our circuits is a non-trivial combination between a half bridge Marx generator and an H bridge in series, combining with the DSP control unit, which can adjust the voltages, frequencies, pulse widths and polarities, and also tolerate various loads. More precisely, we illustrate the design and operation principles for each module in the constructed circuit and analyze the system performance with various loads. The effectiveness and correctness of our proposed circuit and methodologies have been verified and demonstrated by both PSIM simulation results and our own prototype. In this paper, we also show the stability and reliability of the pulse generator we proposed in terms of various load conditions and operation safety respectively. Furthermore, we also observe that the key parameters based on our constructed pulse generator can be easily adjusted which include voltages, frequencies, pulse widths and polarities. We hope that our work will stimulate the further investigations on design and analysis of pulse generators with a focus on modularization and miniaturization. [ABSTRACT FROM PUBLISHER]

Recently, the pulsed power systems have found wide applications. For this reason, using the pulsed power generators that in addition to responding to the needs of the user, are providing the advantages of compactness, high flexibility, high repetition rate and cost efficiency is inevitable. This paper proposes a converter which is a combination of Marx topologies and solid state voltage multipliers. It is capable of producing high voltage pulses with varying amplitudes at different frequencies where is modular and flexible. The resonant circuit used in this structure can reduce the stress on switching element and increase the output voltage while providing a zero current switching for the full bridge converter. Its analytical design is described and its verification is proved by the simulation results in MATLAB\SIMULINK. As a proof of concept, the measurement results taken from the experimental prototype, are presented as well. [ABSTRACT FROM AUTHOR]

Pulsed electric field (PEF) can be used effectively in water treatment applications by passing infected water through two electrodes excited from a high voltage pulsed power supply which guarantees killing the harmful germs. In this paper, a new high-voltage pulse-generator with closed loop control of its output voltage is presented for treating water via underwater pulsed streamer corona discharge. The proposed generator is fed from a low AC voltage source (utility mains 220 V, 50 Hz) which makes it suitable for domestic applications. The proposed topology provides transformer-less operation which reduces the system size and enhances the overall efficiency. The proposed topology is based on capacitor-diode voltage multiplier (CDVM) circuits in conjunction with DC-DC converters (Boost and Buck-Boost converters). The simulation and experimental results elucidate the proposed configuration. [ABSTRACT FROM AUTHOR]

Many research fields need special high-voltage pulses in pulsed power applications, which are different from typical rectangular pulses. In this paper, a high-voltage waveform modulator of two methods using a solid-state Marx generator has been developed and tested. Instead of manufacturing a generator with a specialized structure, the modulator can control a general Marx generator by low-voltage programmable logic devices to produce an irregular but controllable high-voltage triangular pulse with pulse length of ~4.5 μs and peak voltage of ~123 kV. [ABSTRACT FROM PUBLISHER]

The electromagnetic radiation effect of high-voltage, subnanosecond pulsed electric fields attracts strong interest from researchers because of its significant development potential in biological treatments, particularly in noninvasive diagnosis and treatment. But up to now, high-voltage subnanosecond pulse generators are widely used for national defense and military, and they are difficult to implement successfully in the civil medical field. A compact, self-contained, repetitive frequency, high-voltage subnanosecond pulsed power source is proposed in this paper. It was designed, built, and tested successfully. Based on a four-stage, low-inductance Marx generator, the pulsed source produces subnanosecond rise-time pulses. A chopping switch was designed to cut off unformed signals and generate subnanosecond pulses. A measurement device, based on the principle of a capacitive voltage divider, was also constructed to determine both the amplitude and the rise-time of the pulse delivered by the source. Preliminary tests show that the source can produce repetitive frequency pulses with a peak value that exceeds 30 kV, as well as rise-time and pulse width (full wave at half maximum) within 1 ns under atmospheric pressure conditions. The pulse amplitude may be extended to hundreds of kilovolts by filling the switch system with an inert gas. The rise-time would be shortened as well. The pulsed power source shows optimistic prospects in the biological fields. [ABSTRACT FROM PUBLISHER]

This paper presents a novel topology for the generation of high voltage pulses that uses both slow and fast solid-state power switches. This topology includes diode-capacitor units in parallel with commutation circuits connected to a positive buck-boost converter. This enables the generation of a range of high output voltages with a given number of capacitors. The advantages of this topology are the use of slow switches and a reduced number of diodes in comparison with conventional Marx generator. Simulations performed for single and repetitive pulse generation and experimental tests of a prototype hardware verify the proposed topology. [ABSTRACT FROM AUTHOR]