Search

The objective of this paper is to investigate the effect of a high-frequency high-voltage impulse conditioning technique on the inrush current interruption phenomena. In this paper, the inrush current interruption phenomena referred to the actual interruption and the currentless period following interruption. First, Six 7.2 kV vacuum interrupters (VIs) were conditioned by 400 batches of voltage impulses. The duration of each batch were set to 0.1 s. The peak value of each impulse could reach up to 100 kV. The repetition frequency of the impulse was set to 1000 Hz. The contact gap was 0.8 mm. The VIs were tested for the inrush current interruption performance with inrush current set to 2 kA and 5 kA, with a frequency of about 3800 Hz. The experimental results showed that there were two different types of inrush current interruption depending on high-frequency high-voltage impulse conditioning. The inrush current interruption type I referred to the inrush current interruption during the prestrike process before the contacts touched. This type inrush current interruption could be caused by the erosion of prestrike arc. Moreover, the high frequency voltage impulse conditioning influenced the occurrence frequency, the number of interruptions and the duration of the inrush current interruption type I. The inrush current interruption type II referred to the inrush current interruption during the contact bouncing process after the contacts touched. The inrush current interruption type II occurred only in the case of the VIs after conditioning. Furthermore, the occurrence frequency of the inrush current type II decreased with increasing inrush current. [ABSTRACT FROM AUTHOR]

The objective of this paper is to investigate an impact of the inrush current on the prestrike and restrike characteristics of vacuum interrupters (VIs) during capacitive current switching duty. Eleven 7.2 kV VIs are used. Their contact parameters are contact gap 4 mm and contact material CuCr25 (25%weight of Cr). A series of 80 CO operations are executed for each test VI. The amplitude of inrush current Iinrush (3800 Hz) is set to 0 kA, 2 kA, 5 kA and 10 kA, respectively. The switching current is less than 1 A rms. The (1-cosωt) shape of the recovery voltage with a peak of 15 kV is applied to the test VI. The experimental results show that the prestrike and restrike phenomena are significantly influenced by the contact surface conditions damaged by the inrush current. The cumulative probability of the prestrike gap dpre follows a 3- parameter Weibull distribution. When Iinrush increases from 2 kA to 5 kA, the prestrike gap increases accordingly. The 10% dpre increases from 0.5 mm to 0.7 mm. The 50% dpre increases from 0.7 mm to 1.0 mm. The 90% dpre increases from 1.0 mm to 1.5 mm. The scale in the Weibull distribution, which can describe the scattering of dpre, is 0.2 mm and 0.6 mm in the case of Iinrush = 2 kA and Iinrush = 5 kA, respectively. It is found that the occurrence frequency of the inrush current interruption increases from 37.9% to 68.3% with the increase of Iinrush from 2 kA to 5 kA. Moreover, the inrush current also has an impact on the restrike types, which are classified into three types according to the waveform features. The average restrike probability increases from 4.6% to 17.9% and further to 30.4% with the increase of the inrush current from 0 kA to 2 kA and 5 kA, respectively. In addition, the higher the inrush current, the restrike tends to occur earlier during the recovery voltage period. [ABSTRACT FROM AUTHOR]

Capacitor charging power supply (CCPS) is one of the most important components of a pulsed power system. The CCPS studied in this paper is used in power conditioning systems for Laser Nuclear Fusion. With a view to enabling multiple CCPSs to work concurrently in an environment of high voltage, high power and strong electromagnetism, this paper carries out a profound and systematic research into the characteristics of a capacitor charging power supply, including charging rate, harmonic features, efficiency and voltage precision, etc. Furthermore, some measures to improve the characteristics of CCPS are put forward. The advantages of high charging rate, low harmonic, high efficiency and accurate charging voltage are proved by the results of experiments and the performance in practical operation on a 23.5 kV, 50 kW, 4400 μF CCPS. [ABSTRACT FROM AUTHOR]

In this paper athree-stage pulse generator architecture capable of generating high voltage, high current pulses is reported and system issues are presented. Design choices and system dynamics are explained both qualitatively and quantitatively with discussion sections followed by the presentation of closed-form expressions and numerical analysis that provide insight into the system?s operation. Analysis targeted at optimizing performance focuses on diode opening switch pumping, energy efficiency, and compensation of parasitic reactances. A compact system based on these design guidelines has been built to output 8 kV, 5 ns pulses into 50 ?. Output risetimes below 1 ns have been achieved using two different compression techniques. At only 1.5 kg, this light and compact system shows promise for a variety of pulsed power applications requiring the long lifetime, low jitter performance of a solid state pulse generator that can produce fast, high voltage pulses at high repetition rates. [ABSTRACT FROM AUTHOR]

This paper presents a novel topology for the generation of high voltage pulses that uses both slow and fast solid-state power switches. This topology includes diode-capacitor units in parallel with commutation circuits connected to a positive buck-boost converter. This enables the generation of a range of high output voltages with a given number of capacitors. The advantages of this topology are the use of slow switches and a reduced number of diodes in comparison with conventional Marx generator. Simulations performed for single and repetitive pulse generation and experimental tests of a prototype hardware verify the proposed topology. [ABSTRACT FROM AUTHOR]

This paper describes the operation of a solid-state series stacked topology used as a serial and parallel switch in pulsed power applications. The proposed circuit, developed from the Marx generator concept, balances the voltage stress on each series stacked semiconductor, distributing the total voltage evenly. Experimental results from a 10 kV laboratory series stacked switch, using 1200 V semiconductors in a ten stages solid-state series stacked circuit, are reported and discussed, considering resistive, capacitive and inductive type loads for high and low duty factor voltage pulse operation. [ABSTRACT FROM AUTHOR]