Search

This paper presents a capacitor charging power supply (CCPS) using high-voltage dc/dc converter for pulsed power applications. For the main converter, it used full-bridge phase-shifted (FBPS) pulse-width modulation (PWM) converter. The proposed CCPS has modularity concept, and the output voltage was boosted by a high-voltage high-frequency (HVHF) transformer included in FBPS PWM converter. The control method is used a phase-shifted PWM to reduce the losses caused by switching. To solve the voltage unbalancing problem of the output capacitors, synchronization algorithm is selected. Also Thermal characteristics are analyzed by theoretical calculation and simulation. Experimental results of the single module and CCPS are provided to validate the effectiveness of the proposed system and it was carried out the 20-kV 160-kW prototype. [ABSTRACT FROM PUBLISHER]

This paper describes the implementation of a load voltage observer into the control algorithms of a Rapid Capacitor Charger controlled by a digital signal controller (DSC) with a fast DSP core. A hybrid peak current mode control algorithm with digital control of the PWM signal and high speed analog current sensing is used to control the inverter of the charger. The DSC controller keeps the current loop stable using adaptive slope compensation. In addition to providing fast adaptive digital control of the current loop, the DSC can perform additional functions such as estimation of the voltage level of the load capacitor. This avoids the cost, bandwidth limitations and insulation challenges of a conventional HV-sensor. To evaluate the performance of the load voltage observer, we measured the output voltage with a laboratory grade HV probe to establish a reference to test the results of the digital algorithm. [ABSTRACT FROM PUBLISHER]

The High Voltage Convertor Modulators are used to power the RF klystrons used throughout the linear accelerator at the Spallation Neutron Source. The output voltage of the modulator has significant voltage droop and ripple which, combined with low level RF system limitations, affect performance and stability of the accelerator cavities. In conjunction with the progress in the development of the new controller, different modulation techniques were implemented and studied on the test modulator rated at 75 kV, 125 A. This paper presents experimental results from implementation of frequency sweep, phase sweep and combined phase and frequency sweep modulation on the modulator output voltage pulse. Thermal measurements were carried out to determine the effect of these modulations schemes on long term reliability of the modulator. Future plans are also discussed. [ABSTRACT FROM AUTHOR]

This paper describes the design of a compact and highly repetitive pulsed power modulator based on semiconductor switches. Output specifications of the proposed modulator are as follows: variable output pulse voltage, 1-10 kV; width, 1-10 μs; pulse repetition rate (PRR), 1-50,000 pps; and average output power, 10 kW. The proposed solid-state pulsed power modulator has two main parts: an IGBT stack that hasa gate drive circuit for the pulse output with a variable pulse width and repetition rate, and a capacitor charger that has a controllable output voltage. To connect all the storage capacitors in a series for high voltage pulses, a simple and reliable IGBT stack structure was proposed based on the Marx generator. In addition, the gate driver circuit, which supplies power and signals to all the IGBTs simultaneously, was introduced. This providesa superior protection function against the arc and the short. To charge the storage capacitors, a novel 10 kW (10 kV, 1 A) high voltage capacitor charger with the combined advantageof a series-loaded resonant converter and a ZVS (zero-voltage-switching) full-bridge pulse width modulation (PWM) converter was proposed and designed especially for the solid-state pulsed power modulator. Theexperiment results verified that the proposed scheme and structure can be used effectively for a high voltage pulsed power modulator that requires variable voltage, repetition rate, and pulse width, depending on the process of the applications. [ABSTRACT FROM AUTHOR]