Search

This paper presents a capacitor charging power supply (CCPS) using high-voltage dc/dc converter for pulsed power applications. For the main converter, it used full-bridge phase-shifted (FBPS) pulse-width modulation (PWM) converter. The proposed CCPS has modularity concept, and the output voltage was boosted by a high-voltage high-frequency (HVHF) transformer included in FBPS PWM converter. The control method is used a phase-shifted PWM to reduce the losses caused by switching. To solve the voltage unbalancing problem of the output capacitors, synchronization algorithm is selected. Also Thermal characteristics are analyzed by theoretical calculation and simulation. Experimental results of the single module and CCPS are provided to validate the effectiveness of the proposed system and it was carried out the 20-kV 160-kW prototype. [ABSTRACT FROM PUBLISHER]

This paper describes the design of a compact and highly repetitive pulsed power modulator based on semiconductor switches. Output specifications of the proposed modulator are as follows: variable output pulse voltage, 1-10 kV; width, 1-10 μs; pulse repetition rate (PRR), 1-50,000 pps; and average output power, 10 kW. The proposed solid-state pulsed power modulator has two main parts: an IGBT stack that hasa gate drive circuit for the pulse output with a variable pulse width and repetition rate, and a capacitor charger that has a controllable output voltage. To connect all the storage capacitors in a series for high voltage pulses, a simple and reliable IGBT stack structure was proposed based on the Marx generator. In addition, the gate driver circuit, which supplies power and signals to all the IGBTs simultaneously, was introduced. This providesa superior protection function against the arc and the short. To charge the storage capacitors, a novel 10 kW (10 kV, 1 A) high voltage capacitor charger with the combined advantageof a series-loaded resonant converter and a ZVS (zero-voltage-switching) full-bridge pulse width modulation (PWM) converter was proposed and designed especially for the solid-state pulsed power modulator. Theexperiment results verified that the proposed scheme and structure can be used effectively for a high voltage pulsed power modulator that requires variable voltage, repetition rate, and pulse width, depending on the process of the applications. [ABSTRACT FROM AUTHOR]