Search

This paper deals with the effect of supply frequency on partial discharge phenomena. Results of measurements performed on artificial and practical test objects are compared with computer simulations based on physical models. This comparative analysis points out and explains the differences in partial discharge phenomena observed in tests performed at different frequencies (from 0.1 to 300 Hz). The consequences associated to the use of different supply frequencies in practical applications are, eventually, outlined. [ABSTRACT FROM AUTHOR]

Charge accumulation on a solid insulator surface is one of the critical factors for the development of dc gas-insulated equipment since it will lead to the overstress of polymeric insulation due to local field distortion and enhancement. Therefore, it is important to study the charge accumulation phenomenon on spacer surface under dc field. For decades, researchers have made tremendous progress on this subject by measurement and simulation. However, measurement results are quite different by different researchers due to various electrode configurations and experimental conditions. Further, most researchers use potential to represent charge density, which is not rigorous in that many charge density distribution details are hidden behind the potential. As for pure numerical simulation, reports are rather academic and sometimes cannot accord with the real fact. In this paper, attempts are made to characterize the charge accumulation patterns on spacer surface in HVDC gas-insulated system. Surface charge distributions on a model GIL spacer in 0.1 MPa air under DC voltage are obtained by an advanced measurement method, from which the dominant uniform charging pattern and random charge speckles are separated. Mechanism responsible for the dominant uniform charging pattern is discussed with the aid of a simulation model. Results indicate that, in a well-cleaned system, the electric current through the spacer bulk is the principal factor, but gas conduction is not negligible due to some inevitable ion sources. Highly localized pockets of charge are also observed, which are referred to as speckles. They may originate from micro discharges due to tiny metal particles on the spacer surface or microscopic protrusions on the electrodes. [ABSTRACT FROM PUBLISHER]

The article presents the results of measurements and analysis of the flow electrification process. The research is presented with a new type of measurement instrument, in which one of the electrodes moves in an oscillating manner. The arrangement comprises two parallel plates and the liquid is relocated in one dimension. One of the electrodes is in the form of a copper wire. As a result, the liquid distribution is assumed as very simple and similar to the classic Stokes boundary layer. The electrification current measurements for different oscillation frequencies were performed in such an arrangement. The basic characteristics of the measured current and the determined process models were tested. The nonlinear approach and the linear approach were used. In the case of the nonlinear mode, the displacement of electrode was employed as an input. Hammerstein's mode with a piecewise linear input nonlinearity estimator was used for identification. In the case of the linear mode, the calculated velocity magnitude was used as an input into the system. The discrete time Output Error model and the Transfer Function model were used as a linear model. In each case, very good compliance was obtained between the simulation responses and the actual current measurements. [ABSTRACT FROM PUBLISHER]