Search

To figure out the influence rules of trace H2O on SF6 decomposition characteristic components under spark discharge, a series of spark discharge decomposition experiments with various H2O contents were performed using needle-plate electrode to simulate metal protrusion insulation defect. The changing rules and mechanisms of five decomposition characteristic components were achieved quantitatively, indicating that no matter how much H2O was, there exist five main decomposition components: CF4, SOF2, SO2, SOF4 and SO2F2. The contents of the five decomposition components increased with the time extended, and resulting in the contents of SF6 spark decomposition components by the order: SOF2 > SO2F2 > SOF4 > SO2 > CF4. Additionally, the higher H2O content is, the stronger promoting effect on the generation of SO2F2, SOF2, SOF4 and SO2 is. [ABSTRACT FROM AUTHOR]

We explored the thermal decomposition characteristics of SF6 with partial overthermal fault in organic solid insulating materials. Results show that when organic solid insulating materials were around the fault point, the main overthermal decomposition characteristic products of SF6 were CS2, CO2, CF4, H2S, SO2F2, SOF2, and SO2. The difference in the generating reaction and degree of reaction of the seven decomposition components resulted in the complexity of concentration and growth regularity. Surface component analysis after the experiment showed that the thermode surface contained numerous S, O, C and F. Fe existed in the form of Fe2O3 and FeF2. The organic insulating materials added new elements, such as F and S, because HF and H2S easily reacted with O in the epoxy group. [ABSTRACT FROM AUTHOR]

Sulfur hexafluoride (SF₆) gas-insulated equipment (GIE) has been widely used in extra/ultra high voltage power transmission systems. During its operation, GIE inevitably experiences partial overthermal faults caused by poor contact. In this study, the SF₆ decomposition characteristic of partial overthermal faults was used to solve problems that cannot be detected effectively in GIE. First, a large number of experiments were conducted on an SF₆ overthermal decomposition system to obtain the overthermal decomposition characteristic of SF₆ below 400 °C. Then, from the perspective of the physical significance of engineering, three feature parameters, namely, total decomposition amount, effective formation rate, and ratio of characteristic components, were proposed to reveal the deterioration degree of the gas insulation medium as well as to represent the development trend and severity of a partial overthermal fault. Results show that total decomposition amount CT, CT1, and CT2 can depict the degradation degree of the GIE insulation medium and the carbonic metal structure caused by a partial overthermal fault, which can be a good index to differentiate partial overthermal fault temperatures. The effective formation rate of each characteristic component RRMS is closely related to temperature and can reflect the development trend of a partial overthermal fault. The feature ratio CO2/(SO₂F₂+SOF₄+SOF₂+SO₂+H2S) can reveal whether a partial overthermal fault involves organic insulation materials. H2S/(SO₂F₂+SOF₄) can depict the severity of a partial overthermal fault. Log10(SOF₂+SO₂)/(SO₂F₂+SOF₄) and its effective value TCRRMS3 can represent the deterioration degree of GIE and provide excellent correlation with the severity of a partial overthermal fault, and thus, it can be used to evaluate the severity of a partial overthermal fault quantitatively. [ABSTRACT FROM PUBLISHER]

To explore the influence mechanism of trace H2O on SF6 decomposition characteristics under partial thermal fault and establish the foundation of using SF6 thermal decomposition principle to diagnose the thermal fault of SF6 electrical equipment, a series of artificial thermal fault decomposition experiments with different H2O concentrations were conducted on the designed SF6 thermal decomposition experimental system. A trace water injector was used to control the content of trace H2O accurately and gas chromatograph, chromatography-mass spectrometry as well as Fourier transform infrared spectroscopy were used to measure decomposed components. Finally, the thermal decomposition characteristic under 340 ° was achieved. The analysis results indicate no matter how much H2O content is, SF6 can decomposes into many kinds of decomposition characteristics, such as CO2, SOF2, SO2, SOF4, SO2F2, H2S, HF. The concentrations of all these decomposition characteristics increase with the time extended, but change differently with the increase of H2O content, because H2O plays different role in the formation process of each decomposition characteristic components. The variation of H2O content not only affects the production of the decomposition characteristic components, but also makes SO2 and HF gradually evolved into the main characteristic components of SF6 thermal decomposition. In addition, the higher the H2O content is, the stronger the promoting effect on SO2 and HF is. [ABSTRACT FROM AUTHOR]

SF6 decomposition characteristics under partial discharge (PD) are not only associated with insulation fault type and its severity but also closely related to the H2O content of in the equipment. This paper studies the decomposition characteristics of mixture gas SF6/H2O with six different gradients of trace H2O under the same PD energy, selects SO2F2, SOF2, CO2, and CF4 as the characteristic components, and analyzes the influence regularity of trace H2O on each of the component concentration, effective formation rate and characteristic ratio. Results show that H2O creates favorable conditions for generating SO2F2 and SOF2 owing to the capacity to capture F atom and inhibit low fluorine sulfides from recombining into SF6. As a result, the concentration and effective formation rate of SO2F2 and SOF2is positively related with H2O. Whereas H2O has no evident influence on CO2, it can consume intermediate by-products CF2 and CF3 which restrain CF4 generation. Each characteristic ratio decreases sharply and then becomes stable with increment of H2O. The defined effective characteristic ratio effectively reflects its relationship with H2O, whereas obtained mathematical expression between each effective characteristic ratio and trace H2O lays solid foundation for fault diagnosis of SF6 insulated equipment based on SF62 decomposition characteristics. [ABSTRACT FROM AUTHOR]