Search

Tunneling field-effect transistors (TFETs) have gained a great deal of interest recently due to their potential to reduce power dissipation in integrated circuits. One major challenge for TFETs so far has been to achieve high drive currents, which is a prerequisite for high-performance operation. In this paper, we explore the performance potential of a 1-D TFET with a broken-gap heterojunction source injector using dissipative quantum transport simulations based on the nonequilibrium Green's function formalism, as well as the carbon nanotube band structure as the model 1-D material system. We provide detailed insights into broken-gap TFET (BG-TFET) operation and show that it can, indeed, produce less than 60 mV/dec subthreshold swing at room temperature, even in the presence of electron–phonon scattering. The 1-D geometry is recognized to be uniquely favorable due to its superior electrostatic control, reduced carrier thermalization rate, and beneficial quantum confinement effects that reduce the off-state leakage below the thermionic limit. Because of higher source injection compared to staggered-gap and homojunction geometries, BG-TFET delivers superior performance that is comparable to MOSFET's. BG-TFET even exceeds the MOSFET performance at lower supply voltages (VDD), showing promise for low-power/high-performance applications. [ABSTRACT FROM PUBLISHER]

We present a study of the effects of substrate orientation and longitudinal channel stress on the performance of extremely thin silicon-on-insulator (ETSOI) MOSFETs with gate lengths down to 25 nm. We find that short-channel electron and hole mobilities follow the long-channel mobility trends versus substrate orientation and longitudinal channel stress. We show that with respect to (100) silicon-on-insulator (SOI) substrates, short-channel ETSOI MOSFETs on (110) SOI substrates lead to 25% enhancement of the p-channel FET drive current at the expense of 12% degradation of the n-channel FET drive current at a fixed off-current of 100 \nA/\mu\m and a supply voltage of 1 V. Finally, we estimate that an ETSOI complementary metal–oxide–semiconductor (CMOS) on (110) SOI substrates should lead to 10% faster ring oscillators compared with those on (100) SOI wafers, which also implies that (100)-oriented wafers with (110) sidewalls are a better choice for fabricating nonplanar FinFETs and trigate CMOS circuits. [ABSTRACT FROM PUBLISHER]

We present a detailed study of gate length scalability and device performance of undoped-body extremely thin silicon-on-insulator (ETSOI) MOSFETs with back gates. We show that short channel control improves with the application of back bias via a decrease in the electrostatic scaling length as the subthreshold charges move toward the front gate. We demonstrate that, even for undoped ETSOI devices with ∼8-nm SOI thickness, the improvement in short channel control with the application of a back bias translates to 10% higher drive current, 10% shorter gate lengths, and, consequently, 20% lower extrinsic gate delay at a fixed OFF-state current of 100 nA/µm and a back oxide electric field of 1.5 MV/cm (0.5 MV/cm SOI field). [ABSTRACT FROM AUTHOR]

N-and p-MOSFETs have been fabricated in strained Si-on-SiGe-on-insulator (SSOI) with high (15-25%) Ge content. Wafer bonding and H-induced layer transfer techniques enabled the fabrication of the high Ge content SiGe-on-insulator (SGOI) substrates. Mobility enhancement of 50% for electrons (with 15% Ge) and 15-20% for holes (with 20-25% Ge) has been demonstrated in SSOI MOSFETs. These mobility enhancements are commensurate with those reported for FETs fabricated on strained silicon on bulk SiGe substrates. [ABSTRACT FROM AUTHOR]