Search

In this paper, the transition rate (TR) from the high-resistance state to the low-resistance state of a HfO2-based resistive random access memory (RRAM) is investigated. The TR is statistically characterized by applying constant voltage stresses in the range from 0.45 to 0.65 V. It is found that TR follows a voltage dependence which closely resembles the one exhibited by metal-insulator-semiconductor / metal-insulator-metal structures when subjected to constant voltage stress, but with remarkably different fitting parameters. This result suggests a common underlying mechanism in both evolutionary behaviors. Furthermore, the investigation provides additional evidence supporting the micro-structural changes in the oxide after the forming step as well as the role played by the atomic species during the SET event. [ABSTRACT FROM AUTHOR]

3-D integrations are unavoidable task for new emerging memories, including resistive switching random-access memory (RRAM), in order to overcome the market-leading nand flash. However, an RRAM crossbar array (CBA) suffers severe read margin degradation due to the sneak current, which becomes even more critical as the memory density increases with the 3-D integration. In this paper, we extend the two-port readout scheme for a 2-D CBA, proposed in our previous work, to the 3-D vertical structure. A closed-form expression of the operating principle is derived, and HSPICE simulation using a $32\times 32\times8$ vertical RRAM CBA considering practical circuit parameters verifies feasibility of the two-port scheme to the 3-D CBA. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the random telegraph noise (RTN) in hafnium-oxide resistive random access memories in high resistive state (HRS). The current fluctuations are analyzed by decomposing the multilevel RTN signal into two-level RTN traces using a factorial hidden Markov model approach, which allows extracting the properties of the traps originating the RTN. The current fluctuations, statistically analyzed on devices with a different stack reset at different voltages, are attributed to the activation and deactivation of defects in the oxidized tip of the conductive filament, assisting the trap-assisted tunneling transport in HRS. The physical mechanisms responsible for the defect activation are discussed. We find that RTN current fluctuations can be due to either the coulomb interaction between oxygen vacancies (normally assisting the charge transport) and the electron charge trapped at interstitial oxygen defects, or the metastable defect configuration of oxygen vacancies assisting the electron transport in HRS. A consistent microscopic description of the phenomenon is proposed, linking the material properties to the device performance. [ABSTRACT FROM AUTHOR]

A key concern for resistive-switching random access memory (RRAM) is the read noise, due to the structural, chemical, and electrical modifications taking place at the localized current path, or conductive filament (CF). Read noise typically appears as a random telegraph noise (RTN), where the current randomly fluctuates between ON and OFF levels. This paper addresses RTN in RRAM, providing physical interpretations and models for the dependence on the programming and read conditions. First, we explain the RTN dependence on the compliance current during set transition in terms of the size-dependent depletion of carriers within the CF. Then, we discuss the bias dependence of the RTN switching times and amplitude, which can be explained by Joule heating and Poole-Frenkel barrier modifications arising from the electrostatics of the RTN fluctuating center. [ABSTRACT FROM AUTHOR]