Search

Resistive random access memory (ReRAM), a new emerging nonvolatile memory technology based on changes in electrical resistivity of a dielectric film, offers promising advantages such as scalability, fast switching, and low operation voltage. However, for ReRAM to become a successful technology, it is necessary to accurately control the stochastic nature of the conductive nanoscale filaments (CNFs) that governs the resistive switching (RS) behavior of the device and limits its long-term stability and reliability. In this paper, we developed a highly scalable nanostructured/textured electrode that is composed of an array of Al nanotips based on an anodic aluminum oxide template. The nanotips improve the RS characteristics by intensifying the electric field at the apex of each nanotip which is demonstrated using numerical simulations. The localized electric field induces the repetitive nucleation/ formation/rupture of the CNFs in a more controlled fashion compared to a flat Al electrode. As a result, the nanotip sample exhibits uniform and reduced forming/reset voltages as low as 4.70 ± 0.98V/1.00 ± 0.19 V, stable endurance, and long-term retention. As a result, we were able to achieve ultralow-power and error-free operation of 100 cells covering a large area, significantly demonstrating improved uniformity and reliability compared to devices made using flat Al electrodes. This universal bottom-up strategy of self-organized nanostructured-electrodes provides a pathway toward large-scale, highly reliable, and RS memory devices. [ABSTRACT FROM AUTHOR]

In the study of resistive random access memory using GeTeOx film as the switching layer, the device performed excellent property of bipolar resistive switching (BRS), which could be gradually transformed to the complementary resistive switching (CRS) by varying SET process current compliance. The conductive filament conduction mechanism of BRS could be verified by electrical characteristics and reliable data fitting. Through increasing current compliance of the SET process, CRS could be achieved due to higher activity of oxygen vacancies originated from the intensified thermal effect. This paper was beneficial to understand the switching mechanisms of BRS and CRS and provide a method to realize interconversion. Moreover, it was also a potential and promising device to be applied in the neurosynaptic biomimetic field. [ABSTRACT FROM AUTHOR]

In this paper, we demonstrate the linear conductance-change characteristics of a conductive-bridging RAM (CBRAM) to be employed as an artificial synapse device in neuromorphic systems. The CBRAM with a bilayer electrolyte structure (${\mathrm {Cu/Cu}}_{{2}-{x}}\text{S}$ / $\mathrm {WO}_{{3}-{x}}$ /W) exhibits analog switching behavior during the depression process due to the well-controlled dissolution of the conductive filament. To analyze the origin of this motion, we investigate the effective voltage applied to $\mathrm {Cu}_{{2}-{x}}\text{S}$ and $\mathrm {WO}_{{3}-{x}}$. Our findings reveal that $\mathrm {Cu}_{{2}-{x}}\text{S}$ , acting as a voltage divider, helps in suppressing the large voltage drop in $\mathrm {WO}_{{3}-{x}}$ , where the formation/dissolution of filament occurs. Furthermore, due to the diode-like characteristics of $\mathrm {Cu}_{{2}-{x}}\text{S}$ and the division of voltage drop between $\mathrm {WO}_{{3}-{x}}$ and $\mathrm {Cu}_{{2}-{x}}\text{S}$ , an optimum programming energy is applied to $\mathrm {WO}_{{3}-{x}}$ during the depression process. This leads to linear conductance-change characteristics under identical pulses. However, abrupt conductance-change characteristics are observed during the potentiation process. Thus, we use only the device characteristics of the depression part for the neuromorphic system. An excellent classification accuracy is achieved due to the linear conductance-change characteristics and optimized pulse conditions. [ABSTRACT FROM AUTHOR]

Vertical alignment liquid crystal (LC) cell driven by in-plane field with 3-D polymer network exhibited no pooling mura under an external mechanical pressure; however, the operating voltage of the device was increased, because the polymer network hinders field-induced reorientation of LC. In this paper, we adopted a modified cell structure in which a counter electrode on top substrate of the conventional mode is existed, to improve upon this drawback. The proposed device in which the polymer network is formed in bulk of vertically aligned LC layer shows a very fast response time of 2 ms (rise + decay), 57% reduction in operating voltage, and also keeps image quality although the cell is curved. [ABSTRACT FROM AUTHOR]

In this paper, indium-tin-oxide (ITO) was used to act as both insulator and top electrode in resistive random access memory (RRAM) on identical bottom substrates. This is achieved by cosputtering an ITO target with nitride (N2) or oxygen (O2) gas as the insulator; then capping by an ITO electrode, such that both the rectifier and RRAM characteristics can be achieved before and after a forming process, respectively. In contrast, using pure ITO as an insulator does not exhibit RRAM behavior. To verify the rectifier and RRAM characteristics, material analyses and electrical measurements at various temperatures were conducted. Reliability tests including retention and endurance were also applied to verify the resistance switching stability. Finally, the rectifier and RRAM conduction models were proposed to examine the resistance switching behaviors. By applying the ITO material as both electrode and insulator, the resistance switching characteristic with high reliability is thus obtained. [ABSTRACT FROM AUTHOR]

There has been a strong demand for developing an ultradense and low-power nonvolatile memory technology. In this paper, we present a carbon-based resistive random access memory device with a carbon nanotube (CNT) electrode. An amorphous carbon layer is sandwiched between the fast-diffusing top metal electrode and the bottom CNT electrode, exhibiting a bipolar switching behavior. The use of the CNT electrode can substantially reduce the size of the active device area. We also demonstrate a carbon-based complementary resistive switch (CRS) consisting of two back-to-back connected memory cells, providing a route to reduce the sneak current in the cross-point memory. The bit information of the CRS cell is stored in a high-resistance state, thus reducing the power consumption of the CRS memory cell. This paper provides valuable early data on the effect of electrode size scaling down to nanometer size. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate the influence of the drain electrode on the dynamic switching behavior of AlGaN/GaN high-electron-mobility transistors on Si substrate. By adding a field plate to the drain electrode, a dramatic increase in the dynamic ON-resistance dynR \mathrm{\scriptscriptstyle ON} was identified. The dispersion effect is correlated with the high electric field below the drain field plate (DFP), the onset of which is caused by the full electron depletion from both the channel and the GaN cap layer. We show that the electron distribution is modified by the passivation method, backside bias, or surface charges and, hence, shifts the onset voltage of the trapping effect. Trapped electrons underneath the DFP are thought to be responsible for the measured rise of the dynR \mathrm{\scriptscriptstyle ON} . With the introduction of an extended ohmic drain contact, the influence of a metallization overhang at the drain edge can be suppressed. The detrapping energies associated with the surface defects were determined to 0.2, 0.3, and 0.7 eV, respectively. Simulations and measurements indicate that charges inside the passivation below the DFP worsen the switching behavior. [ABSTRACT FROM AUTHOR]

A compact microelectromechanical (MEM) switch design and associated family of logic gates, memory cells, and other basic very-large-scale integration (VLSI) digital circuit sub blocks are proposed to ensure zero crowbar current in addition to zero leakage current while minimizing mechanical delay. The circuit design methodology introduced in this paper also provides for lower device count and hence lower operating power consumption. A prototype of the MEM switch design is demonstrated. [ABSTRACT FROM PUBLISHER]

A highly transparent resistive random access memory with a configuration of multilayer graphene (MLG)/ Dy2O3 /indium tin oxide (ITO) structure is demonstrated in this paper. The fabricated device is transparent, with 80% transmittance at 550 nm. The MLG/ Dy2O3 /ITO device shows unipolar resistance switching with a low operation current (<100~\muA) , low operation voltage (<1~V) , low power consumption (<100~\muW) , high resistance ratio (>10^4) , fast switching speed (<60~ns) , reliable data retention, and promising cycle endurance properties (>200~cycles) , which makes a step toward the realization of low-power transparent electronics for next-generation nonvolatile memory application. The MLG/ Dy2O3 /ITO device exhibited typical filamentary-conduction-type resistive random access memory behavior and no forming process is required. High resistance state (HRS) increases with a reduced device area while low resistance state (LRS) is insensitive to the device sizes. Moreover, Raman spectra obtained in pristine state, HRS, and LRS indicate that the lower power consumption of MLG/ Dy2O3 /ITO device is attributable to the formation of oxygen graphene layers. [ABSTRACT FROM AUTHOR]

Metal/NiO/Pt films with various electrodes were fabricated to investigate the effects of standard free energy (SFE) on NiO resistive switching devices. By selecting Ti, Ta, Ag, Cu, and Co as the top electrodes (TEs), we found that the switching voltage was inversely proportional to the SFE. The reason for this is attributed to the different thicknesses of the oxidized interface between TE and NiO. Since the thickness of the oxidized interface depends on the SFE, this paper provides an effective way to control and adjust the switching voltage. [ABSTRACT FROM PUBLISHER]