Search

Magnetic tunnel junctions (MTJs) with low switching current, high thermal stability, and small device size are strongly preferred for low-power, high-reliability, and high-density spintronic memory and logic applications. The research of MTJs from shape in-plane magnetic anisotropy to interfacial perpendicular magnetic anisotropy (i-PMA) has successfully paved the way down to 20-nm scale, below which, however, the i-PMA approach reaches a physical limit in sustaining sufficient thermal stability while achieving low-power spin transfer torque switching. Recently, studies have been reported a new approach to pave the way toward sub-10-nm MTJs satisfying the requirements by revisiting shape perpendicular magnetic anisotropy (s-PMA). In this paper, we present a compact model of the sub-10-nm s-PMA MTJ device, which captures both the static and dynamic physical behaviors. This model is SPICE-compatible for hybrid MTJ/CMOS circuit designs. This paper is expected to push forward the development of sub-10-nm-scale MTJ-based spintronic memory and logic circuits. [ABSTRACT FROM AUTHOR]

Stochastic computing (SC) is a promising technology that can be used for low-cost hardware designs. However, SC suffers from its long latency. Although parallel processing can efficiently shorten the latency, duplicated stochastic number generators (SNGs) are necessary, which cause substantial hardware overhead. This paper proposes a scalable SNG based on the spin-Hall-effect (SHE), which is capable of generating multiple independent stochastic streams simultaneously. The design takes advantages of the efficient charge-to-spin conversion from the Spin-Hall material and the intrinsic stochasticity of nanomagnets. Compared to previous spintronic SNGs, the SHE-SNG can reduce the area by $1.6\times -7.8\times $ and the power by $4.9\times -13\times $ while increasing the degree of parallelism from 1 to 16. Compared to CMOS-based SNGs, the proposed SNG obtained $24\times -120\times $ and $53\times $ reduction in terms of area and power, respectively. Finally, three benchmarks were implemented, and the results indicate that SC implementations with the proposed SHE-SNG can achieve $1.2\times -29\times $ reduction of hardware resources compared to implementations with previous CMOS- and spintronic-based designs while scaling the degree of parallelism from 1 to 64. [ABSTRACT FROM AUTHOR]

Although spin transfer torque (STT)-based magnetic tunneling junction (MTJ) owns advantages of nonvolatility, nonlimited endurance, and fast write/read, its demand for high current density significantly casts a shadow over its future prospects. Recently, a novel three-terminal MTJ cell that combines voltage-controlled magnetic anisotropy (VCMA) effect and negative capacitance (NC) effect is proposed. Drawing support from the NC amplified VCMA effect and the three-step operation scenario, this novel MTJ cell can dramatically lower the energy consumption to fJ as well as keep high operation speed within nanoseconds. The feasibility of the proposed NC enhanced VCMA spintronics device for memory and logic application is proved by extensive physical simulation in our previous work. However, a SPICE compatible compact model of the proposed NC enhanced VCMA spintronics device is still demanded for circuit and system level evaluation. In this paper, we provide an accurate and fast compact model of NC enhanced VCMA device for both memory and logic applications. [ABSTRACT FROM AUTHOR]

Spin transfer torque (STT)-based switching of magnetic random access memories (MRAMs) has stimulated considerable research interest in recent years. The nonvolatility of STT-MRAMs, high areal density, and low static power dissipation makes them a strong contender for possible replacement of conventional silicon-based memories. However, a major bottleneck associated with STT-MRAMs is their high write current requirement. Recently, it has been demonstrated that the high write current of the STT switching mechanism can be improved by using other magnetic switching techniques like voltage-controlled magnetic anisotropy, spin Hall effect, and magnetoelectric effect. Interestingly, each of these new physics increases the design space to be explored and presents interesting tradeoffs with respect to read and write mechanisms. It is, therefore, important to analyze these devices with respect to their readability, writability, and areal density in a unified framework that is based on the state-of-the-art experimental results. Toward that end, in this paper, we present an overview of various physics underlying these magnetic memories and discuss associated bit-cell circuitry. Furthermore, we present a holistic comparative analysis based on detailed numerical simulations highlighting the various design tradeoffs. [ABSTRACT FROM AUTHOR]

Stateful in-memory logic (IML) is a promising paradigm to realize the unity of data storage and processing in the same die, exhibiting great feasibility to break the bottleneck of the conventional von Neumann architecture. On the roadmap toward developing such a logic platform, a critical step is the effective and efficient realization of a complete set of logic functions within a memory. In this paper, we report a realization of stateful reconfigurable logic functions via a single three-terminal magnetic tunnel junction (MTJ) device within a spintronic memory by exploiting the novel voltage-gated spin Hall-effect driven magnetization switching mechanism. This proposed reconfigurable IML methodology can be implemented within either a typical memory array or a cross-point array architecture. The feasibility of the proposed approach is successfully demonstrated with hybrid MTJ/CMOS circuit simulations. We believe our work may promote the research and development of the revolutionary IML for future non-von Neumann architectures. [ABSTRACT FROM PUBLISHER]

Spintronics is the exploitation of both the degree of freedom of electron that is spin as well as the charge, which leads to tremendous development in the field of microelectronic applications. In this paper, bimetallic Co–Ni-based spin FET device is fabricated, and its magnetoresistance behavior has been studied. While, spin current as a function of thickness of Co–Ni-based concatenable spin switch has been studied. The results obtained for spin current using simulation and experimentation show good agreement. [ABSTRACT FROM PUBLISHER]