Search

The introduction of metal nanocrystals (NCs) has been confirmed to improve electrical uniformity of oxide-based resistive random access memory (RRAM) devices significantly; however, the current reports do not systematically elucidate the relationship between the size/distribution of NCs and the electrical uniformity of RRAM devices. In this paper, we focused on the impact of metal NCs size and areal density on the resistive switching (RS) performances of oxide RRAM by atomic layer deposition (ALD) based on the experimental results and theoretical calculation. The dependence of ALD cycles of 50–130 during Pt or CoPtx NCs growth on the RS parameters of Al2O3 or HfO2 memory units has been evaluated systematically. The RRAM embedded Pt or CoPtx NCs shows the trends: with increasing ALD cycles, the forming voltage, set/reset voltage, the resistance in off and on state, and ${R}_{ \mathrm{\scriptscriptstyle OFF}}/{R}_{ \mathrm{\scriptscriptstyle ON}}$ ratio entirely first decrease, then flatten, and increase later with a minimum value at about 100 cycles. Although all metal NCs with various sizes enhance the electric field strength compared to at the planar region, only metal NCs with proper NCs size and areal density (9 nm/6– $10\times 10^{\textsf {11}}$ /cm2 in this paper) can effectively produce stronger localized electric field at the tip of metal NCs, leading to optimal RS behavior. [ABSTRACT FROM AUTHOR]

This paper investigates the issues of oxygen accumulation and variation in the high-resistance state of HfO2-based resistive random access memory (RRAM), with improvement attained by inserting a thin oxygen-vacancy-rich layer of indium-tin-oxide (ITO) film. By acting as the oxygen ion reservoir, this ITO thin film on the TiN electrode can further stabilize resistance switching (RS) characteristics. In terms of reliability, ac endurance, and retention tests confirm stable RS characteristics for the Pt/HfO2/ITO/TiN device. Finally, a conducting model was proposed to explain the influence of the ITO thin layer and clarify the physical mechanism of electrical improvements. [ABSTRACT FROM AUTHOR]

In the study of resistive random access memory using GeTeOx film as the switching layer, the device performed excellent property of bipolar resistive switching (BRS), which could be gradually transformed to the complementary resistive switching (CRS) by varying SET process current compliance. The conductive filament conduction mechanism of BRS could be verified by electrical characteristics and reliable data fitting. Through increasing current compliance of the SET process, CRS could be achieved due to higher activity of oxygen vacancies originated from the intensified thermal effect. This paper was beneficial to understand the switching mechanisms of BRS and CRS and provide a method to realize interconversion. Moreover, it was also a potential and promising device to be applied in the neurosynaptic biomimetic field. [ABSTRACT FROM AUTHOR]